Validation of a Monte Carlo model of a large‐format kV flat‐panel system
Sign Up to like & getrecommendations! Published in 2025 at "Medical Physics"
DOI: 10.1002/mp.18093
Abstract: Online adaptive radiation therapy (ART) offers a paradigm shift in radiotherapy by enabling adjustments to the planned dose based on daily anatomical variation. In the context of cone‐beam computed tomography (CBCT) for online ART on… read more here.
Keywords: panel; carlo model; validation monte; model large ... See more keywords
Insight into the inhomogeneous capacity distribution characteristic of LiFePO4 cathode in large-format lithium ion cell
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.12.037
Abstract: Abstract The inhomogeneous capacity degradation distribution of large-format LiFePO4-based lithium ion cell after 2500 charge-discharge cycles is analyzed via the selected regions of the cathodes using half-cell charge-discharge test, high resolution transmission electron microscopy, X-ray… read more here.
Keywords: inhomogeneous capacity; microscopy; large format; spectroscopy ... See more keywords
Investigation of current distributions of large-format pouch cells with individual temperature gradients by segmentation
Sign Up to like & getrecommendations! Published in 2021 at "Journal of energy storage"
DOI: 10.1016/j.est.2021.102300
Abstract: Abstract Current distributions within large-format pouch cells or between cells in parallel circuits are of great interest for battery systems and have already been investigated in several studies. However, the approaches employed to both cases… read more here.
Keywords: current distributions; pouch cells; format pouch; large format ... See more keywords
RTO-LLI: Robust Real-Time Image Orientation Method With Rapid Multilevel Matching and Third-Times Optimizations for Low-Overlap Large-Format UAV Images
Sign Up to like & getrecommendations! Published in 2025 at "IEEE Transactions on Geoscience and Remote Sensing"
DOI: 10.1109/tgrs.2025.3559983
Abstract: Unmanned aerial vehicle (UAV) real-time photogrammetry is important to promote the rapid generation of photogrammetry 4-D product, intelligent information extraction and rapid remote sensing mapping, and efficient large-scale 3-D modeling. However, for real-time processing of… read more here.
Keywords: real time; time; image; low overlap ... See more keywords
Distributed Thermal Monitoring for Large-Format Li-Ion Battery Under Limited Sensing
Sign Up to like & getrecommendations! Published in 2024 at "IEEE Transactions on Transportation Electrification"
DOI: 10.1109/tte.2023.3302153
Abstract: Thermal monitoring is critical to the safety of electric vehicles. Due to the uneven surface temperature of large-format lithium-ion (Li-ion) batteries, traditional lump-based thermal monitoring methods cannot capture two-dimensional (2-D) spatiotemporal thermodynamics. This article proposes… read more here.
Keywords: battery; monitoring; distributed thermal; ion ... See more keywords
Characterization of the Teledyne COSMOS camera: a large format CMOS image sensor for astronomy
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Astronomical Telescopes, Instruments, and Systems"
DOI: 10.1117/1.jatis.11.2.026003
Abstract: Abstract. The Teledyne COSMOS-66 is a next-generation complementary metal-oxide-semiconductor (CMOS) camera designed for astronomical imaging, featuring a large-format sensor (8120×8120 pixels, each 10 μm wide), high quantum efficiency, high frame rates, and a correlated multi-sampling mode that… read more here.
Keywords: image; sensor; astronomy; camera ... See more keywords
Characterizing the dark count rate of a large-format MKID array.
Sign Up to like & getrecommendations! Published in 2023 at "Optics express"
DOI: 10.1364/oe.485003
Abstract: We present an empirical measurement of the dark count rate seen in a large-format MKID array identical to those currently in use at observatories such as Subaru on Maunakea. This work provides compelling evidence for… read more here.
Keywords: large format; mkid; count rate; count ... See more keywords
Mechanical Characterization and Modeling of Large-Format Lithium-Ion Battery Cell Electrodes and Separators for Real Operating Scenarios
Sign Up to like & getrecommendations! Published in 2024 at "Batteries"
DOI: 10.3390/batteries10120422
Abstract: This study presents a novel application-oriented approach to the mechanical characterization and subsequent modeling of porous electrodes and separators in lithium-ion cells to gain a better understanding of their real mechanical operating behavior. An experimental… read more here.
Keywords: format lithium; lithium ion; mechanical characterization; electrodes separators ... See more keywords
Characterization and Model Validation for Large Format Chopped Fiber, Foamed, Composite Structures Made from Recycled Olefin Based Polymers
Sign Up to like & getrecommendations! Published in 2020 at "Polymers"
DOI: 10.3390/polym12061371
Abstract: The purpose of this research is to predict the material performance of large format foamed core composite structures, such as crossties or structural timbers, using only constitutive properties. These structures are fabricated from recycled post-consumer/post-industrial… read more here.
Keywords: four point; model; large format; composite structures ... See more keywords
Photoinitiator Selection and Concentration in Photopolymer Formulations towards Large-Format Additive Manufacturing
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14132708
Abstract: Photopolymers are an attractive option for large-format additive manufacturing (LFAM), because they can be formulated from structural thermosets and cure rapidly in ambient conditions under low-energy ultraviolet light-emitting diode (UV LED) lamps. Photopolymer cure is… read more here.
Keywords: large format; concentration; cure; photopolymer formulations ... See more keywords
Influence of Extrusion Parameters on the Mechanical Properties of Slow Crystallizing Carbon Fiber-Reinforced PAEK in Large Format Additive Manufacturing
Sign Up to like & getrecommendations! Published in 2024 at "Polymers"
DOI: 10.3390/polym16162364
Abstract: Additive Manufacturing (AM) enables the automated production of complex geometries with low waste and lead time, notably through Material Extrusion (MEX). This study explores Large Format Additive Manufacturing (LFAM) with carbon fiber-reinforced polyaryletherketones (PAEK), particularly… read more here.
Keywords: mechanical properties; additive manufacturing; extrusion; format additive ... See more keywords