Mechanical properties and microstructures in zirconium deposited by injected powder laser additive manufacturing
Sign Up to like & getrecommendations! Published in 2018 at "Additive manufacturing"
DOI: 10.1016/j.addma.2018.05.037
Abstract: Abstract The use of laser additive manufacturing based on melting of injected zirconium powder under localized shielding was evaluated in terms of microstructures and mechanical properties of thin wall structures. The material was characterized in… read more here.
Keywords: laser additive; powder; zirconium; mechanical properties ... See more keywords
Recent progress in laser additive manufacturing of aluminum matrix composites
Sign Up to like & getrecommendations! Published in 2020 at "Current opinion in chemical engineering"
DOI: 10.1016/j.coche.2020.01.005
Abstract: Laser additive manufacturing (LAM) can produce high-performance and near net shape parts of aluminum matrix composite (AMC) with higher specific strength, better wear resistance and more outstanding physical properties than aluminum alloys, which are widely… read more here.
Keywords: aluminum matrix; recent progress; laser additive; additive manufacturing ... See more keywords
Microstructure and fracture behavior of TiC particles reinforced Inconel 625 composites prepared by laser additive manufacturing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.10.280
Abstract: Abstract Laser additive manufacturing (LAM) is applied to manufacture particles reinforced composites due to its high designability, non-mold and high working flexibility. In this paper, TiC particles reinforced Inconel 625 composites were fabricated by LAM… read more here.
Keywords: microscopy; laser additive; particles reinforced; additive manufacturing ... See more keywords
The effects of Zr contents on microstructure and properties of laser additive manufactured Ti-6.5Al-3.5Mo-0.3Si-xZr alloys
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.02.079
Abstract: Abstract A new type of Ti-6.5Al-3.5Mo-0.3Si-xZr (x = 1.5, 2.5, 3.5, 4.5 wt%) titanium alloys developed on TC11 alloy (x = 1.5) with different Zr contents were fabricated by laser additive manufacturing process in order to enhance the mechanical properties.… read more here.
Keywords: 3si xzr; 5al 5mo; laser additive; effects contents ... See more keywords
Microstructure and mechanical properties of Ni-Cr-Si-B-Fe composite coating fabricated through laser additive manufacturing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.02.296
Abstract: Abstract In this study, Ni-Cr-Si-B-Fe amorphous ribbon was coated on a mild steel substrate by laser additive manufacturing. The microstructure, phase composition, tribological behavior, and mechanical properties of the coating were systematically investigated. The results… read more here.
Keywords: phase; laser additive; composite coating; mechanical properties ... See more keywords
Solidification behavior and grain morphology of laser additive manufacturing titanium alloys
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.11.055
Abstract: Abstract The prior β grain structure is recognized to be an important factor governing the mechanical properties of laser additive manufacturing (LAM) titanium alloys (ti-alloys) components. Five kinds of ti-alloys plates were fabricated by LAM… read more here.
Keywords: titanium alloys; laser additive; behavior grain; solidification behavior ... See more keywords
Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.01.213
Abstract: Abstract High entropy alloys (HEAs) have attracted much attention and been considered as novel materials with wide application prospects due to their outstanding comprehensive properties. With the development of laser processing technology, laser additive manufacturing… read more here.
Keywords: heat; laser additive; heat treatment; microstructure ... See more keywords
Performance improvement of laser additive manufactured Cu‒Cr alloy via continuous extrusion
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.160475
Abstract: Abstract Cu‒Cr alloy is a kind of functional and structural integrated material with excellent comprehensive mechanical and electrical properties. However, due to the low solubility of Cr in Cu and the huge difference in melting… read more here.
Keywords: extrusion; performance improvement; improvement laser; laser additive ... See more keywords
Research status of laser additive manufacturing for metal: A review
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.08.050
Abstract: Abstract Additive manufacturing (AM) especially laser additive manufacturing (LAM), a novel manufacturing technique of layer-by-layer forming according to geometric model, provides a decent option for materials processing. It owns advantages of rapid prototyping, customization, high… read more here.
Keywords: status; laser additive; manufacturing; metal ... See more keywords
Laser additive processing of Ni-Fe-V and Ni-Fe-Mo Permalloys: Microstructure and magnetic properties
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.01.059
Abstract: Abstract Ni-Fe-Mo/V known as Permalloys are of great interest because of widespread applications in transformers, electric motors, and other electromagnetic devices. This letter focuses on the ability to utilize laser-based additive manufacturing, specifically the laser… read more here.
Keywords: processing permalloys; magnetic properties; permalloys microstructure; laser additive ... See more keywords
Study of microstructure evolution and preference growth direction in a fully laminated directional micro-columnar TiAl fabricated using laser additive manufacturing technique
Sign Up to like & getrecommendations! Published in 2019 at "Materials Letters"
DOI: 10.1016/j.matlet.2019.01.137
Abstract: Abstract In this study, a fully laminated Ti-48Al-2Nb-2Cr alloy plate with no cracks and aluminum loss is successfully fabricated using laser additive manufacturing technique. A well-aligned micro-columnar microstructure is expected to grow along the deposition… read more here.
Keywords: fully laminated; growth; laser additive; fabricated using ... See more keywords