Laser Surface Pattering of Titanium for Improving the Biological Performance of Dental Implants
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Healthcare Materials"
DOI: 10.1002/adhm.201600858
Abstract: Direct laser interference patterning (DLIP) is used to produce periodic line-like patterns on titanium surfaces. An Nd:YAG laser operating at 532 nm wavelength with a pulse duration of 8 ns is used for the laser… read more here.
Keywords: laser surface; surface pattering; surface; titanium ... See more keywords
Enhanced laser surface ablation with an integrated photoacoustic imaging and high intensity focused ultrasound system
Sign Up to like & getrecommendations! Published in 2019 at "Lasers in Surgery and Medicine"
DOI: 10.1002/lsm.23072
Abstract: Combined laser and ultrasound treatments have been found to have synergistic effects, which may be of particular note in dermatology. We aim to investigate the potential of this technology for dermatology through in vitro and… read more here.
Keywords: laser surface; dermatology; integrated photoacoustic; ablation integrated ... See more keywords
Effect of Preheating on the Microstructure, Impact Properties, and Fracture Mechanisms of a Laser Surface‐Hardened High‐Carbon–Chromium Steel
Sign Up to like & getrecommendations! Published in 2021 at "steel research international"
DOI: 10.1002/srin.202100295
Abstract: To optimize the toughness and hardness of laser surface‐hardened high‐carbon–chromium (52100) steel, the effect of preheating on microstructure evolution and impact property is studied, and the impact fracture mechanism is analyzed. The results indicate that… read more here.
Keywords: surface hardened; laser surface; microstructure; surface ... See more keywords
Formation of Structure and Properties of Titanium Under Laser Surface Alloying with Nickel and Manganese
Sign Up to like & getrecommendations! Published in 2019 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-019-00338-w
Abstract: The effect of laser surface alloying with nickel and manganese on the structure, phase composition, microhardness, and fretting resistance of the surface of titanium is studied. Treatment modes improving the structure and properties of the… read more here.
Keywords: laser surface; alloying nickel; surface; nickel manganese ... See more keywords
Cold Gas-Sprayed Deposition of Metallic Coatings onto Ceramic Substrates Using Laser Surface Texturing Pre-treatment
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-018-0718-y
Abstract: AbstractCold spraying enables a variety of metals dense coatings onto metal surfaces. Supersonic gas jet accelerates particles which undergo with the substrate plastic deformation. Different bonding mechanisms can be created depending on the materials. The… read more here.
Keywords: topography; laser surface; surface; onto ceramic ... See more keywords
Microstructure and thermal stability of a Ni-Cr-Co-Ti-V-Al high-entropy alloy coating by laser surface alloying
Sign Up to like & getrecommendations! Published in 2017 at "Metals and Materials International"
DOI: 10.1007/s12540-017-6583-2
Abstract: A Ni-Cr-Co-Ti-V-Al high-entropy alloy (HEA) coating with a BCC phase and (Ni, Co)Ti2 compounds was synthesized successfully by laser surface alloying on a Ti-6Al-4V substrate. The microstructure of as-synthesized coatings is typical, namely, the microstructure… read more here.
Keywords: laser surface; hea; entropy alloy; high entropy ... See more keywords
Micro/nanostructures formation by femtosecond laser surface processing on amorphous and polycrystalline Ni60Nb40.
Sign Up to like & getrecommendations! Published in 2017 at "Applied surface science"
DOI: 10.1016/j.apsusc.2016.11.107
Abstract: Femtosecond laser surface processing is a technology that can be used to functionalize many surfaces, imparting specialized properties such as increased broadband optical absorption or superhydrophilicity/superhydrophobicity. In this study, two unique classes of surface structures,… read more here.
Keywords: laser surface; laser; asg mounds; surface ... See more keywords
Enhanced bond strength for micro-arc oxidation coating on magnesium alloy via laser surface microstructuring
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.02.041
Abstract: Abstract This paper presents a one-stop laser surface texturing (LST) method for in situ micro-arc oxidation (MAO) coating on magnesium substrates to enhance the bond strength. The results show that the pore density of the… read more here.
Keywords: bond strength; laser surface; laser; surface ... See more keywords
Surface engineering and the application of laser-based processes to stents - A review of the latest development
Sign Up to like & getrecommendations! Published in 2022 at "Bioactive Materials"
DOI: 10.1016/j.bioactmat.2021.08.023
Abstract: Late in-stent thrombus and restenosis still represent two major challenges in stents’ design. Surface treatment of stent is attracting attention due to the increasing importance of stenting intervention for coronary artery diseases. Several surface engineering… read more here.
Keywords: chemistry; surface engineering; laser surface; surface ... See more keywords
Adhesion enhancement of PEEK/6161-T6 FLJ joints via laser surface modification
Sign Up to like & getrecommendations! Published in 2021 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2021.108797
Abstract: Abstract The metal-thermoplastic hybrid structure has been widely employed in aviation and aerospace industry. In this work, we developed a feasible way of laser surface texturing to address the poor adhesion between PEEK and 6061-T6… read more here.
Keywords: peek 6061; surface; adhesion; laser surface ... See more keywords
Diode laser surface treatment of bearing steel for improved sliding wear performance
Sign Up to like & getrecommendations! Published in 2020 at "Optik"
DOI: 10.1016/j.ijleo.2019.163357
Abstract: Abstract The high carbon Cr-bearing SAE 52100 steel grade in hardened and tempered condition is widely used for production of bearings in the automotive, machinery, wind turbine and construction industries. It is extensively used for… read more here.
Keywords: laser surface; surface; sliding wear; bearing steel ... See more keywords