Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04161-5
Abstract: Mg and Ti alloy are hard to be bonded due to their huge discrepancy in physical and metallurgical characteristics. As an intermediate element, Ni is feasible for joining of Mg and Ti. The interfacial microstructure…
read more here.
Keywords:
interfacial layer;
coating thickness;
butt laser;
layer ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "International Journal of Minerals, Metallurgy and Materials"
DOI: 10.1007/s12613-020-2027-y
Abstract: Revealing grains and very fine dendrites in a solidified weld metal of aluminum-magnesium-silicon alloys is difficult and thus, there is no evidence to validate the micro- and meso-scale physical models for hot cracks. In this…
read more here.
Keywords:
hot cracks;
metal;
silicon alloys;
aluminum magnesium ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2019.02.040
Abstract: Abstract A numerical modeling approach is proposed for the process of powder feeding-based laser welding occurring in joining similar and dissimilar materials. For this reason, a three-dimensional computational model is developed to describe the complex…
read more here.
Keywords:
thermal fluid;
powder feeding;
powder;
fluid dynamics ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "CIRP Journal of Manufacturing Science and Technology"
DOI: 10.1016/j.cirpj.2021.09.001
Abstract: Abstract A 3D finite-element thermal model has been developed to estimate weld geometry and analyze thermal gradients and cooling rates in pulsed laser welding of Inconel 718 superalloy. Since Inconel 718 superalloy is sensitive to…
read more here.
Keywords:
inconel 718;
hot cracking;
geometry;
laser welding ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2020.111607
Abstract: Abstract The 316LN stainless steel with a thickness of 21 mm was welded by autogenous laser welding from both sides with an YLS-20000 fiber laser welding system. The microstructure of the welding joint was characterized…
read more here.
Keywords:
autogenous laser;
laser welding;
investigation microstructure;
welding joint ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Heliyon"
DOI: 10.1016/j.heliyon.2021.e08601
Abstract: Dual Phase steels are one of the most used advanced high-strength materials in the industry, due to its combination of a ductile ferritic matrix and disperse hard martensite islands, which provide outstanding mechanical properties for…
read more here.
Keywords:
dual phase;
steel sheets;
phase;
laser welding ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Optik"
DOI: 10.1016/j.ijleo.2017.08.082
Abstract: Abstract The effect of process parameters viz., welding speed, pulse energy and frequency on the aspect ratio and the peak temperature in the numerical simulation of Nd: YAG laser welding of Hastelloy C-276 is presented.…
read more here.
Keywords:
welding hastelloy;
numerical simulation;
simulation;
laser welding ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.12.268
Abstract: Abstract Electron beam melting (EBM) is an established powder-bed additive manufacturing process for small-to-medium-sized components of Ti-6Al-4V. For further employing EBM on fabricating large-scale components, an effort has been made by joining EBM-built Ti-6Al-4V plates…
read more here.
Keywords:
effect welding;
welding angle;
electron beam;
microstructure ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.03.026
Abstract: Abstract Brazed alloys between cubic boron nitride (cBN) grits and matrix extremely affect the service life of the grinding wheel. The aim of this study was to investigate the addition of elemental Zr to improve…
read more here.
Keywords:
brazing alloys;
study;
pulsed laser;
welding brazing ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.03.033
Abstract: Abstract Large microstructure gradients in high-power-density welding usually have negative effects on the mechanical properties of weld joints. In this paper, we found that the width of the weld microstructure in transition region was widened…
read more here.
Keywords:
weld microstructure;
thermo electromagnetic;
microstructure;
temf ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.06.025
Abstract: Abstract Effect of pulsed laser welding parameters (pulse energy and duration, frequency, welding speed and, as a result, overlapping factor) on properties of E110 (Zr-1%Nb) alloy welds is presented. Butt welded joints of two identical…
read more here.
Keywords:
metal;
hydrogen;
weld metal;
metal contamination ... See more keywords