16.52% Efficiency All‐Polymer Solar Cells with High Tolerance of the Photoactive Layer Thickness
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Materials"
DOI: 10.1002/adma.202108749
Abstract: All‐polymer solar cells (all‐PSCs) have drawn growing attention and achieved tremendous progress recently, but their power conversion efficiency (PCE) still lags behind small‐molecule‐acceptor (SMA)‐based PSCs due to the relative difficulty on morphology control of polymer… read more here.
Keywords: polymer solar; photoactive layer; layer; layer thickness ... See more keywords
Polymer Solar Cells with Active Layer Thickness Compatible with Scalable Fabrication Processes: A Meta‐Analysis
Sign Up to like & getrecommendations! Published in 2023 at "Advanced Materials"
DOI: 10.1002/adma.202210146
Abstract: Organic photovoltaics (OPV) has been considered for a long time a promising emerging solar technology. Currently, however, market shares of OPV are practically non‐existent. A detailed meta‐analysis of the literature published until mid‐2021 is presented,… read more here.
Keywords: meta analysis; layer thickness; solar cells; analysis ... See more keywords
Mapping diurnal changes in choroidal, Haller’s and Sattler’s layer thickness using 3-dimensional 1060-nm optical coherence tomography
Sign Up to like & getrecommendations! Published in 2017 at "Graefe's Archive for Clinical and Experimental Ophthalmology"
DOI: 10.1007/s00417-017-3723-9
Abstract: PurposeTo test the significance of diurnal changes in choroidal, Haller’s and Sattler’s layer thickness in healthy subjects using spatial analysis of three-dimensional (3D) 1060-nm optical coherence tomography (OCT) scans.MethodsAutomatically generated choroidal, Haller’s and Sattler’s layer… read more here.
Keywords: layer; layer thickness; choroidal haller; sattler layer ... See more keywords
OCT evaluation of orthodontic surface sealants: a 12-month follow-up randomized clinical trial
Sign Up to like & getrecommendations! Published in 2020 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-020-03462-7
Abstract: Objectives The aim of this single-center randomized controlled trial (NCT03753256) was to assess orthodontic surface sealant layer thickness and integrity in vivo during a 12-month follow-up by optical coherence tomography (OCT). Materials and methods Using… read more here.
Keywords: orthodontic surface; trial; layer; layer thickness ... See more keywords
The resin-matrix cement layer thickness resultant from the intracanal fitting of teeth root canal posts: an integrative review.
Sign Up to like & getrecommendations! Published in 2021 at "Clinical oral investigations"
DOI: 10.1007/s00784-021-04070-9
Abstract: OBJECTIVE The aim of this study was to perform an integrative review on the layer thickness and microstructure of resin-matrix cements around custom-made or standard teeth root intracanal posts. MATERIALS AND METHODS An electronic search… read more here.
Keywords: cement; layer thickness; resin matrix;
Experimental Studies on Laser Additive Manufacturing of Inconel-625 Structures Using Powder Bed Fusion at 100 µm Layer Thickness
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05215-9
Abstract: This paper reports process development and material characterization studies of Inconel-625 (IN625) using laser powder bed fusion (LPBF)-based additive manufacturing at higher layer thickness (100 µm). Conventionally, layer thickness up to 50 µm is used… read more here.
Keywords: 100 layer; layer thickness; layer; lpbf ... See more keywords
Experimental Study on the Effect of Boundary Layer on High-Speed Train Aerodynamic Forces Measurement
Sign Up to like & getrecommendations! Published in 2021 at "Ksce Journal of Civil Engineering"
DOI: 10.1007/s12205-021-0670-0
Abstract: The influences of boundary layer thickness on the aerodynamic characteristics of a high-speed train head car were investigated with an 1:8 scaled model in an 8 m × 6 m wind tunnel at CARDC. Boundary… read more here.
Keywords: layer thickness; boundary layer; speed train; layer ... See more keywords
Microstructure, mechanical and corrosion properties of TiN/Ni nanomultilayered films
Sign Up to like & getrecommendations! Published in 2018 at "Rare Metals"
DOI: 10.1007/s12598-018-1154-3
Abstract: AbstractNanomultilayered TiN/Ni thin films with different bilayer periods (57.8–99.7 nm) and Ni single-layer thickness (3.9–19.2 nm) were prepared by alternatively sputtering Ti and Ni targets in N2 gas atmosphere. The microstructure, mechanical and corrosion properties of the… read more here.
Keywords: single layer; layer thickness; corrosion; bilayer period ... See more keywords
Flexural Strength and Surface Profiling of Carbon-Based PLA Parts by Additive Manufacturing
Sign Up to like & getrecommendations! Published in 2021 at "Journal of The Institution of Engineers (India): Series C"
DOI: 10.1007/s40032-021-00719-2
Abstract: Recent years have witnessed the exponential shift in the designing of products and manufacturing in quick time with improved quality through numerous Additive Manufacturing (AM) techniques. This paper examines the flexural properties of the carbon-based… read more here.
Keywords: strength; layer thickness; pla; additive manufacturing ... See more keywords
On the measurement of effective powder layer thickness in laser powder-bed fusion additive manufacturing of metals
Sign Up to like & getrecommendations! Published in 2019 at "Progress in Additive Manufacturing"
DOI: 10.1007/s40964-018-0064-0
Abstract: In laser powder-bed fusion (LPBF), the actual thickness of powder particles that spread on solidified zones, so-called effective layer thickness (ELT), is higher than the nominal layer thickness. The source cause of this discrepancy is the… read more here.
Keywords: powder; layer thickness; powder bed; laser powder ... See more keywords
Influence of the nitrided layer thickness of dies made of two types of tool steel used in hot extrusion of valve forgings made of nickel–chromium steel on the durability of these tools
Sign Up to like & getrecommendations! Published in 2021 at "Archives of Civil and Mechanical Engineering"
DOI: 10.1007/s43452-021-00301-8
Abstract: The study constitutes an analysis of the durability of dies used in the first operation of producing valve forgings from chromium–nickel steel (NCF 3015) for motor trucks. The average durability of the dies (subjected to… read more here.
Keywords: nitrided layer; layer thickness; valve forgings; durability ... See more keywords