Articles with "low content" as a keyword



Photo from wikipedia

Radionuclide tolerance mechanism of plants for ultraselective enrichment of low content of thorium with exceptional selectivity coefficient.

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of hazardous materials"

DOI: 10.1016/j.jhazmat.2019.120893

Abstract: Selective enriching low content of radionuclides from radioactive wastewater is a critical issue for environmentally benign utilization of nuclear power. Inspired by the tolerance mechanism of plants to radionuclides, we developed a pH-triggered ultraselective coordinative… read more here.

Keywords: enrichment; content; tolerance mechanism; low content ... See more keywords
Photo by jordanmcdonald from unsplash

Performance improvement of non-sintering permeable brick with the addition of fibers at a low content

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of building engineering"

DOI: 10.1016/j.jobe.2021.103191

Abstract: Abstract At present, a large amount of land is occupied and the environment is polluted due to the production and accumulation of massive dredged sediment. At the same time, the construction of “sponge cities” is… read more here.

Keywords: dspb; performance; low content; strength ... See more keywords
Photo from wikipedia

In-situ investigation of multiple endothermic peaks in isomorphous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with low HV content by synchrotron radiation

Sign Up to like & get
recommendations!
Published in 2019 at "Polymer"

DOI: 10.1016/j.polymer.2019.01.077

Abstract: Abstract Multiple endothermic peaks of isomorphous P(HB-co-HV) with low HV content were investigated by DSC, in-situ WAXD and SAXS measurements. The multiple endothermic peaks are confirmed to be caused by two different kinds of crystal… read more here.

Keywords: endothermic peaks; situ; low content; peaks isomorphous ... See more keywords
Photo by stuchy from unsplash

Ni-B electrodeposits with low B content: Effect of DMAB concentration on the internal stresses and the electrochemical behaviour

Sign Up to like & get
recommendations!
Published in 2018 at "Surface and Coatings Technology"

DOI: 10.1016/j.surfcoat.2018.03.018

Abstract: Abstract Ni-B coatings with low, increasing amount of Boron have been produced using a Ni sulfamate plating bath with the addition of dimethylaminborane. Coatings' characterization revealed that it is possible to produce crack-free coatings with… read more here.

Keywords: content effect; electrodeposits low; effect dmab; increase ... See more keywords
Photo by unstable_affliction from unsplash

Breakaway oxidation of a low-Al content nanocrystalline coating at 1000 °C

Sign Up to like & get
recommendations!
Published in 2019 at "Surface and Coatings Technology"

DOI: 10.1016/j.surfcoat.2018.12.034

Abstract: Abstract Nanocrystalline coating though with low Al reservoir shows high oxidation and spallation resistance, owing to its high density of defects and grain boundaries. It now attracts growing attention. However, with oxidation going on, its… read more here.

Keywords: oxidation; nanocrystalline coating; breakaway oxidation; low content ... See more keywords
Photo from wikipedia

Ultra-Low Content Bismuth-Anchored Gold Aerogels with Plasmon Property for Enhanced Nonenzymatic Electrochemical Glucose Sensing.

Sign Up to like & get
recommendations!
Published in 2022 at "Analytical chemistry"

DOI: 10.1021/acs.analchem.2c01836

Abstract: Effective glucose surveillance provides a strong guarantee for the high-quality development of human health. Au nanomaterials possess compelling applications in nonenzymatic electrochemical glucose biosensors owing to superior catalytic performances and intriguing biocompatibility properties. However, it… read more here.

Keywords: ultra low; low content; aerogels plasmon; nonenzymatic electrochemical ... See more keywords
Photo by jakubpabis from unsplash

Low Pt-content ternary PtNiCu nanoparticles with hollow interiors and accessible surfaces as enhanced multifunctional electrocatalysts.

Sign Up to like & get
recommendations!
Published in 2020 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.9b20076

Abstract: Developing highly active and durable electrocatalysts with low levels of Pt content toward some crucial reactions including oxygen reduction reaction, hydrogen evolution reaction and methanol oxidation reaction in an acidic electrolyte environment are desirable but… read more here.

Keywords: enhanced multifunctional; ternary ptnicu; accessible surfaces; content ternary ... See more keywords

Low Au-content CoAu electrodes for environmental applications

Sign Up to like & get
recommendations!
Published in 2022 at "RSC Advances"

DOI: 10.1039/d2ra04828k

Abstract: Six cobalt gold (CoAu) electrodes were prepared by electroless deposition using different gold-containing solutions (acidic and weakly acidic) and different Au deposition times. Characterization of CoAu electrodes was done by scanning electron microscopy with energy-dispersive… read more here.

Keywords: coau electrode; environmental applications; low content; coau electrodes ... See more keywords
Photo from wikipedia

Enhanced thermal properties of epoxy composites by constructing thermal conduction networks with low content of three-dimensional graphene

Sign Up to like & get
recommendations!
Published in 2023 at "Nanotechnology"

DOI: 10.1088/1361-6528/acc18a

Abstract: Micro/nano electronic devices heat dissipation depends heavily on the thermal interface materials (TIMs). Despite notable progress, it is hard to efficaciously enhance the thermal properties of the hybrid TIMs with high-load additives due to an… read more here.

Keywords: graphene; thermal properties; content three; low content ... See more keywords
Photo from wikipedia

Mechanical, Hydrophobic, and Barrier Properties of Nanocomposites of Modified Polypropylene Reinforced with Low-Content Attapulgite

Sign Up to like & get
recommendations!
Published in 2022 at "Polymers"

DOI: 10.3390/polym14173696

Abstract: Attapulgite (ATT) has never been used as a barrier additive in polypropylene (PP). As a filler, ATT should be added in high content to PP. However, that would result in increased costs. Moreover, the compatibility… read more here.

Keywords: att; barrier; low content; modified polypropylene ... See more keywords