Articles with "low loading" as a keyword



Photo by hixenia from unsplash

Continuous Hydrogenation of Ethyl Levulinate to 1,4-Pentanediol over 2.8Cu-3.5Fe/SBA-15 Catalyst at Low Loading: The Effect of Fe Doping.

Sign Up to like & get
recommendations!
Published in 2019 at "ChemSusChem"

DOI: 10.1002/cssc.201901198

Abstract: Bimetallic Cu-Fe catalysts with low loading were prepared for hydrogenation of ethyl levulinate (EL) to 1,4-pentanediol (1,4-PDO). Among them, 2.8Cu-3.5Fe/SBA-15 (Cu/Fe molar ratio of 1:1.5) performed best, capable of converting EL into key γ-Valerolactone (GVL)… read more here.

Keywords: ethyl levulinate; 8cu 5fe; levulinate pentanediol; low loading ... See more keywords
Photo by ktsfish from unsplash

Ultra-low Pt loading catalyst layers prepared by pulse electrochemical deposition for PEM fuel cells

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Applied Electrochemistry"

DOI: 10.1007/s10800-017-1071-4

Abstract: We report the production of efficient, ultra-low Pt loading catalyst layers on fuel cell electrodes via pulse potential deposition (PPD) from a H2Pt(OH)6 plating solution. We show that by optimizing the off time in the… read more here.

Keywords: ultra low; catalyst layers; low loading; deposition ... See more keywords
Photo from wikipedia

Strategies for sustainable palladium catalysis

Sign Up to like & get
recommendations!
Published in 2021 at "Coordination Chemistry Reviews"

DOI: 10.1016/j.ccr.2021.213925

Abstract: Abstract Palladium is established both as an indispensable metal in modern synthetic chemistry and as a key component in catalytic converters and electronic equipment. The unrelenting demand for this metal increases both the financial and… read more here.

Keywords: strategies sustainable; low loading; metal; catalysis ... See more keywords
Photo by fabiooulucas from unsplash

Feasibility of ultra-low Pt loading electrodes for high temperature proton exchange membrane fuel cells based in phosphoric acid-doped membrane

Sign Up to like & get
recommendations!
Published in 2019 at "International Journal of Hydrogen Energy"

DOI: 10.1016/j.ijhydene.2019.09.073

Abstract: Abstract Factors as the Pt/C ratio of the catalyst, the binder content of the electrode and the catalyst deposition method were studied within the scope of ultra-low Pt loading electrodes for high temperature proton exchange… read more here.

Keywords: ultra low; high temperature; low loading; electrodes high ... See more keywords
Photo from wikipedia

Surface Facet Engineering in Nanoporous Gold for Low-Loading Catalysts in Aluminum-Air Batteries.

Sign Up to like & get
recommendations!
Published in 2021 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.0c20163

Abstract: The performance of metal-air batteries and fuel cells depends on the speed and efficiency of electrochemical oxygen reduction reactions at the cathode, which can be improved by engineering the atomic arrangement of cathode catalysts. It… read more here.

Keywords: air batteries; low loading; gold; loading catalysts ... See more keywords
Photo from wikipedia

Low-Loading Sub-3 nm PtCo Nanoparticles Supported on Co-N-C with Dual Effect for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells.

Sign Up to like & get
recommendations!
Published in 2022 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.2c15996

Abstract: Developing low-loading Pt-based catalysts possessing glorious catalytic performance can accelerate oxygen reduction reaction (ORR) and hence significantly advance the commercialization of proton exchange membrane fuel cells. In this report, we propose a hybrid catalyst that… read more here.

Keywords: effect; fuel; oxygen reduction; reduction reaction ... See more keywords
Photo from wikipedia

Highly Porous Iridium Thin Electrodes with Low Loading and Improved Reaction Kinetics for Hydrogen Generation in PEM Electrolyzer Cells.

Sign Up to like & get
recommendations!
Published in 2023 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.2c23304

Abstract: Highly efficient electrodes with simplified fabrication and low cost are highly desired for the commercialization of proton exchange membrane electrolyzer cells (PEMECs). Herein, highly porous Ir-coated thin/tunable liquid/gas diffusion layers with honeycomb-structured catalyst layers were… read more here.

Keywords: electrolyzer cells; iridium thin; low loading; porous iridium ... See more keywords
Photo from wikipedia

Impact of Current and Temperature on Extremely Low Loading Epoxy-CNT Conductive Composites

Sign Up to like & get
recommendations!
Published in 2020 at "Polymers"

DOI: 10.3390/polym12040867

Abstract: Carbon nanotube (CNT) conductive composites have attracted significant attention for their potential use in applications such as electrostatic dissipation and/or electromagnetic interference shielding. The focus of this work is to evaluate resistivity trends of extremely… read more here.

Keywords: extremely low; loading epoxy; cnt conductive; low loading ... See more keywords