Controlled Surface Rolling: A Novel Low Plasticity Burnishing Technique to Mitigate Stress Corrosion Cracking in Machined SS304L
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-025-10921-3
Abstract: In this work, controlled surface rolling (CSR), a novel roller based low plasticity burnishing technique, was developed to mitigate initiation of stress corrosion cracking (SCC) in machined SS304L in chloride environment. This setup utilized a… read more here.
Keywords: burnishing technique; surface; surface rolling; low plasticity ... See more keywords
A new failure criterion for determining the cyclic resistance of low-plasticity fine-grained tailings
Sign Up to like & getrecommendations! Published in 2019 at "Engineering Geology"
DOI: 10.1016/j.enggeo.2019.105273
Abstract: Abstract Reasonable determination of the cyclic resistance of low-plasticity fine-grained tailings is important for the engineering design of new tailings dams. In this paper, a series of monotonic and cyclic triaxial undrained tests were conducted… read more here.
Keywords: low plasticity; failure criterion; plasticity fine; fine grained ... See more keywords
Liquefaction resistance of fibre reinforced low-plasticity silt
Sign Up to like & getrecommendations! Published in 2018 at "Soil Dynamics and Earthquake Engineering"
DOI: 10.1016/j.soildyn.2017.11.004
Abstract: Abstract This study sought to investigate the effect of bulk continuous filament (BCF) on the liquefaction resistance of low plasticity silt by performing a series of cyclic triaxial tests on the reference (unreinforced) and reinforced… read more here.
Keywords: liquefaction resistance; low plasticity; liquefaction; plasticity silt ... See more keywords
Geotechnical Properties of a Low-Plasticity Clay with Biopolymer
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials in Civil Engineering"
DOI: 10.1061/(asce)mt.1943-5533.0002380
Abstract: AbstractThis study presents geotechnical characteristics of a low-plasticity clay improved by xanthan gum biopolymer, which is an innocuous microbially induced polymer with high tensile strength. T... read more here.
Keywords: geotechnical properties; plasticity clay; low plasticity; properties low ... See more keywords
Studies on the Microstructural Evolution and Mechanical Properties of Superalloy Inconel 718 Induced by Low Plasticity Burnishing Coupled with Turning
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15113740
Abstract: Mechanical surface treatments are needed to perform on components for fatigue life enhancement by introducing beneficial compressive residual stress and material strengthening. In this study, the combined turning with low plasticity burnishing (LPB) surface modification… read more here.
Keywords: plasticity burnishing; lpb process; low plasticity; mechanical properties ... See more keywords
Effect of Ball Burnishing Pressure on Surface Roughness by Low Plasticity Burnishing Inconel 718 Pre-Turned Surface
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15228067
Abstract: The low plasticity burnished surface roughness is significantly affected by the low plasticity burnishing (LPB) parameters. This research proposed the analytical prediction model to predict the LPBed surface roughness and optimal LPB pressure based on… read more here.
Keywords: surface roughness; surface; lpbed surface; model ... See more keywords