Creep property and microstructural evolution of DD11 alloy under high temperature and low stress
Sign Up to like & getrecommendations! Published in 2018 at "Rare Metals"
DOI: 10.1007/s12598-018-1098-7
Abstract: In this paper, the interrupted and ruptured creep tests were carried out in a novel second generation single crystal superalloy named DD11 at 1100 °C/130 MPa. The alloy exhibited typical creep curve including primary, steady, and tertiary… read more here.
Keywords: microstructural evolution; microscopy; creep property; steady creep ... See more keywords
Modelling of elimination of strength-limiting defects by pressure-assisted sintering at low stress levels
Sign Up to like & getrecommendations! Published in 2021 at "Journal of the European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2021.09.040
Abstract: Abstract The structural reliability of sintered products depends on large defects introduced during powder processing, which cannot be removed by pressureless sintering. Here, we present a model how a large single ellipsoidal void is deformed,… read more here.
Keywords: assisted sintering; pressure assisted; stress; low stress ... See more keywords
The effect of low stress triaxialities and deformation paths on ductile fracture simulations of large shell structures
Sign Up to like & getrecommendations! Published in 2019 at "Marine Structures"
DOI: 10.1016/j.marstruc.2018.08.004
Abstract: Abstract In accidental limit state analysis of ship structures and their components, the common assumption is that failure takes place in the plate field under multi-axial tension, thus most advancements in developing fracture criteria have… read more here.
Keywords: stress triaxialities; ductile fracture; low stress; fracture ... See more keywords
Effect of interface dislocations on mass flow during high temperature and low stress creep of single crystal Ni-base superalloys
Sign Up to like & getrecommendations! Published in 2021 at "Scripta Materialia"
DOI: 10.1016/j.scriptamat.2020.09.016
Abstract: Abstract In this work, the nanometer-scale mass flow coupled to dislocation processes near the γ/γ′-interface during high temperature and low stress creep of a model Ni-base single crystal superalloy is investigated. In the early creep… read more here.
Keywords: temperature low; stress creep; low stress; creep ... See more keywords
Effect of thermo-mechanical processing on the low impact abrasion and low stress sliding wear resistance of austenitic high manganese steels
Sign Up to like & getrecommendations! Published in 2019 at "Wear"
DOI: 10.1016/j.wear.2018.10.013
Abstract: Abstract The low impact abrasion and low stress sliding wear properties of two thermo-mechanically processed austenitic high manganese steels (Fe17Mn and Fe17Mn3Al) have been studied. It is observed that the application of thermo-mechanical processing (TMP)… read more here.
Keywords: impact abrasion; low stress; sliding wear; stress sliding ... See more keywords
Assessment of low-stress and rolling contact abrasion of WC-based overlays for the restoration of undercarriage components
Sign Up to like & getrecommendations! Published in 2021 at "Wear"
DOI: 10.1016/j.wear.2021.203820
Abstract: Abstract A significant fraction of operational cost in oil sands mining is directly or indirectly related to undercarriage component wear. One of the strategies to minimize the cost is to repair/rebuild the worn components. Recent… read more here.
Keywords: abrasion; low stress; rolling contact; based overlays ... See more keywords
Physicochemical Characterization of Sabin Inactivated Poliovirus Vaccine for Process Development.
Sign Up to like & getrecommendations! Published in 2020 at "Journal of pharmaceutical sciences"
DOI: 10.1016/j.xphs.2020.12.012
Abstract: Upscaling the production capacity of inactivated poliovirus vaccines (IPV) is urgently needed to eradicate polio worldwide. For the development of a robust manufacturing process for IPV, the impact of stresses on the properties of the… read more here.
Keywords: poliovirus vaccine; inactivated poliovirus; process; low stress ... See more keywords
Tactile Comfort and Low-Stress Mechanical Properties of Half-Bleached Knitted Fabrics Made from Cotton Yarns with Different Parameters
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Natural Fibers"
DOI: 10.1080/15440478.2019.1697989
Abstract: ABSTRACT Consumers purchasing textiles usually feel fabrics for its tactile properties indicating that they are interested in comfort properties rather than other properties. During daily activities, low-stress mechanical action like bending, shear, compression, tensile, and… read more here.
Keywords: knitted fabrics; yarn; stress mechanical; mechanical properties ... See more keywords
Influence of the reasonable crack initiation force obtained by coupling AE parameters and stress-strain on low-stress cropping quality
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science"
DOI: 10.1177/09544062221075155
Abstract: In view of the problem that it is difficult to accurately obtain the crack initiation force required for the metal bar with V-shaped notch in the low-stress precision cropping, a new method for synchronous measurement… read more here.
Keywords: crack; low stress; crack initiation; initiation force ... See more keywords
Genome-Wide Association Studies of Photosynthetic Traits Related to Phosphorus Efficiency in Soybean
Sign Up to like & getrecommendations! Published in 2018 at "Frontiers in Plant Science"
DOI: 10.3389/fpls.2018.01226
Abstract: Photosynthesis is the basis of plant growth and development, and is seriously affected by low phosphorus (P) stress. However, few studies have reported for the genetic foundation of photosynthetic response to low P stress in… read more here.
Keywords: soybean; genes low; stress; candidate genes ... See more keywords
The Ca2+-CaM Signaling Pathway Mediates Potassium Uptake by Regulating Reactive Oxygen Species Homeostasis in Tobacco Roots Under Low-K+ Stress
Sign Up to like & getrecommendations! Published in 2021 at "Frontiers in Plant Science"
DOI: 10.3389/fpls.2021.658609
Abstract: Potassium (K+) deficiency severely threatens crop growth and productivity. Calcium (Ca2+) signaling and its sensors play a central role in the response to low-K+ stress. Calmodulin (CaM) is an important Ca2+ sensor. However, the mechanism… read more here.
Keywords: cam signaling; signaling pathway; roots low; stress ... See more keywords