LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "lubricant" as a keyword



Fabricating smooth PDMS microfluidic channels from low-resolution 3D printed molds using an omniphobic lubricant-infused coating.

Sign Up to like & get
recommendations! Published in 2018 at "Analytica chimica acta"

DOI: 10.1016/j.aca.2017.11.063

Abstract: The advent of 3D printing has allowed for rapid bench-top fabrication of molds for casting polydimethylsiloxane (PDMS) chips, a widely-used polymer in prototyping microfluidic devices. While fabricating PDMS devices from 3D printed molds is fast… read more here.

Keywords: microfluidic channels; surface; lubricant; topology ... See more keywords
Photo from wikipedia

Nucleate boiling heat transfer of R-134a and R-134a/POE lubricant mixtures on smooth tube

Sign Up to like & get
recommendations! Published in 2020 at "Applied Thermal Engineering"

DOI: 10.1016/j.applthermaleng.2020.116359

Abstract: Abstract The present study examines the influence of polyolester lubricant oil (POEA-68 and POEA-170) with R-134a on the nucleate pool boiling performance for a horizontal smooth tube. The heat flux ranges from 10 kW/m2 to… read more here.

Keywords: mass; lubricant; mass fraction; transfer ... See more keywords

Computational intelligence-based design of lubricant with vegetable oil blend and various nano friction modifiers

Sign Up to like & get
recommendations! Published in 2019 at "Fuel"

DOI: 10.1016/j.fuel.2018.12.094

Abstract: Abstract Biodegradable lubricant based on the blend of various vegetable oils with different nano friction modifier in combination is designed using computational intelligence technique and experimentally tested. A database is developed from the published literature… read more here.

Keywords: lubricant; blend various; oil; friction ... See more keywords

Evaluation of lubricant properties of polyolester oil blended with sesame oil-An experimental investigation

Sign Up to like & get
recommendations! Published in 2021 at "Journal of Cleaner Production"

DOI: 10.1016/j.jclepro.2020.125347

Abstract: Abstract The yearly emissions of synthetic oil to the watercourses alarmingly affect the living organisms in the water bodies, lands and affects the entire earth as a harmful pollutant. Oils from the vegetables/seeds are nowadays… read more here.

Keywords: sesame oil; lubricant; blend; polyolester oil ... See more keywords
Photo from wikipedia

Brushable Lubricant-Infused Porous Coating with Enhanced Stability by One-Step Phase Separation.

Sign Up to like & get
recommendations! Published in 2021 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.1c02751

Abstract: Slippery lubricant-infused porous surface (SLIPS) is a promising solution to undesired adhesion. Unfortunately, the complicated fabrication process and limited coating area block its practical applications. Herein, we report a one-step strategy to fabricate polypropylene-based SLIPS… read more here.

Keywords: phase separation; infused porous; lubricant infused; lubricant ... See more keywords

Condensationof Satellite Droplets on Lubricant-CloakedDroplets

Sign Up to like & get
recommendations! Published in 2020 at "ACS Applied Materials & Interfaces"

DOI: 10.1021/acsami.9b22417.s001

Abstract: Condensation on lubricant-infused micro- or nanotextured superhydrophobic surfaces exhibits remarkable heat transfer performance owing to the high condensation nucleation density and efficient condensate droplet removal. When a low surface tension lubricant is used, it can… read more here.

Keywords: water droplets; water; droplet; lubricant ... See more keywords

Comparative evaluation of lubricant properties of jatropha and jojoba methyl ester

Sign Up to like & get
recommendations! Published in 2024 at "Cogent Engineering"

DOI: 10.1080/23311916.2024.2334397

Abstract: Abstract It is well known that lubricating oils can reduce the coefficient of friction between two contacting surfaces. Owing to their poor biodegradability and toxicity, petroleum lubricants are typically deemed unacceptably harmful to the environment.… read more here.

Keywords: jatropha; catalyst; epoxidized jatropha; lubricant ... See more keywords

Bacterial vaginosis incidence following a single hyperosmolal vaginal lubricant exposure: A comparison of two observational cohorts.

Sign Up to like & get
recommendations! Published in 2025 at "Sexually transmitted diseases"

DOI: 10.1097/olq.0000000000002184

Abstract: BACKGROUND Hyperosmolal lubricants may negatively affect the vaginal microenvironment, increasing the risk for bacterial vaginosis (BV). We compared the incidence of Amsel-defined BV in reproductive-age women exposed to hyperosmolal lubricant during transvaginal ultrasound to those… read more here.

Keywords: new onset; lubricant; risk; lubricant exposure ... See more keywords

Research on the tribological properties of kaolin/MoDDP composite lubricant additives under heavy load and impact conditions

Sign Up to like & get
recommendations! Published in 2025 at "Industrial Lubrication and Tribology"

DOI: 10.1108/ilt-09-2024-0331

Abstract: Purpose With respect to severe working conditions such as heavy load and impact, this paper aims to investigate the friction reduction and anti-wear performance of kaolin and molybdenum dialkyl dithiophosphate (MoDDP) composite lubricant additives to… read more here.

Keywords: lubricant additives; load impact; lubricant; composite lubricant ... See more keywords

Study of Perfluoropolyether Lubricant Consumption and Recovery in Heat Assisted Magnetic Recording Using Molecular Dynamics Simulation Method

Sign Up to like & get
recommendations! Published in 2017 at "IEEE Transactions on Magnetics"

DOI: 10.1109/tmag.2016.2637872

Abstract: Currently, heat-assisted magnetic recording (HAMR) technology has been proposed as a method for enabling higher storage density. In this paper, the molecular dynamic simulation method was used to investigate the consumption and recovery of the… read more here.

Keywords: method; lubricant; tex math; consumption ... See more keywords

Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718

Sign Up to like & get
recommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"

DOI: 10.1177/0954405415592128

Abstract: Abundant application of cutting fluids may increase production cost and cause environmental and health damages, particularly when not properly managed. Thus, alternative measures are needed to overcome the difficulties of using cutting fluids. If sustainable… read more here.

Keywords: turning inconel; inconel 718; minimum quantity; lubricant ... See more keywords