Influence of Machining Parameters on Machinability of Inconel 718—A Review
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202200202
Abstract: Ni‐based superalloy Inconel 718 is renowned owing to its admirable physical and mechanical properties at higher temperatures. Various industries including aerospace and automobile are using this superalloy in gas turbines and other components. Meanwhile, the… read more here.
Keywords: review; influence machining; machinability inconel; machining parameters ... See more keywords
The effect of abrading and cutting instruments on machinability of dental ceramics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Medicine"
DOI: 10.1007/s10856-018-6031-y
Abstract: AbstractThe aim was to investigate the effect of machining instruments on machinability of dental ceramics. Four dental ceramics, including two zirconia ceramics were machined by three types (SiC, diamond vitrified, and diamond sintered) of wheels… read more here.
Keywords: machinability; volume; instruments machinability; diamond ... See more keywords
Review on Machinability of Fiber Reinforced Polymers: A Drilling Approach
Sign Up to like & getrecommendations! Published in 2018 at "Silicon"
DOI: 10.1007/s12633-018-9764-9
Abstract: Performance of conventional materials in diverse engineering application is not satisfactory due to the development in products design and engineering materials. In this case, fiber reinforced Polymers (FRPs) have attracted the material engineers with their… read more here.
Keywords: machinability; fiber reinforced; reinforced polymers; polymers drilling ... See more keywords
Experimental assessment on machinability performance of CNT and DLC coated HSS tools for hard turning
Sign Up to like & getrecommendations! Published in 2021 at "Diamond and Related Materials"
DOI: 10.1016/j.diamond.2021.108568
Abstract: Abstract The present work investigates the deposition of carbon nanotubes (CNT) over the HSS tool. Also, it assesses the machining capacity of the coated tool with respect to some of most important aspects of the… read more here.
Keywords: cnt; dlc coated; coated tool; tool ... See more keywords
Thermal analysis and machinability for laser-assisted machining of fused silica
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2019.119078
Abstract: Abstract Machining of fused silica to obtain high precision dimension and surface property has been an industry wide problem. In this study, laser-assisted machining (LAM) of fused silica has been introduced with three-dimensional thermal models… read more here.
Keywords: fused silica; temperature; machinability; silica ... See more keywords
Temperature effects on the Ti6Al4V machinability using cooled gaseous nitrogen in semi-finishing turning
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2017.09.025
Abstract: Abstract More and more stringent environmental concerns and regulations over contamination and pollution are driving the research to alternative cooling strategies that are more environmental friendly but still offer the same advantages of the conventional… read more here.
Keywords: machinability; temperature; semi finishing; gaseous nitrogen ... See more keywords
Influence of cutting speed and cooling method on the machinability of commercially pure titanium (CP-Ti) grade II
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2017.12.021
Abstract: Abstract The present investigation aims in highlighting the influence of cutting speed and an eco-friendly cooling technique during finish turning of CP-Ti grade 2. Experiments were performed at three distinct machining modes viz. dry cutting… read more here.
Keywords: cutting speed; machinability; influence cutting; grade ... See more keywords
Effect of cutting fluids applied in MQCL mode on machinability of Ti-6Al-4V
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.05.029
Abstract: Abstract This paper experimentally investigates the role of minimum quantity cooling-lubrication (MQCL) with soluble oil, aqueous alumina and hBN nanofluids in turning of Ti-6Al-4 V. The effect of various machining environments has been studied on different… read more here.
Keywords: mqcl mode; chip tool; soluble oil; applied mqcl ... See more keywords
Machinablility of titanium matrix composites (TMC) reinforced with multi-walled carbon nanotubes
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2020.04.008
Abstract: Abstract Carbon nanotube (CNT) reinforced titanium matrix composite (TMC) is a type of new material with promising potentials in industry because of its superior properties such as low density and high elastic modulus. In this… read more here.
Keywords: carbon; machinability; walled carbon; titanium ... See more keywords
Influence of the heat treatment on the microstructure and machinability of titanium aluminides produced by electron beam melting
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2017.01.037
Abstract: Abstract Additive manufacturing (AM) has been emerging as a promising fabrication technology for polymers and metal products. This technology is able to fabricate complex shape components with high geometrical freedom and allows to reduce the… read more here.
Keywords: machinability; treatment; surface; heat ... See more keywords
Machinability evaluations of austempered ductile iron and cast steel with similar mechanical properties under eco-friendly milling conditions
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.01.123
Abstract: Abstract In engineering applications, to increase productivity and to decrease production costs, the selection of the proper engineering material is essential. At that point, machining operations directly affect the production costs. Therefore, determination of the… read more here.
Keywords: mechanical properties; austempered ductile; cast steel; similar mechanical ... See more keywords