Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23836
Abstract: Strontium ferrite was incorporated into different rubber matrices to prepare rubber magnetic composites. Three types of elastomers, butadiene rubber BR as non-polar elastomer, acrylonitrile butadiene rubber NBR and blend acrylonitrile butadiene rubber – polyvinyl chloride…
read more here.
Keywords:
strontium ferrite;
non polar;
magnetic composites;
rubber ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Materials Science"
DOI: 10.1007/s10853-019-04009-2
Abstract: Fe powder particles were coated with ZnFe2O4 layer by in situ oxidation and then mixed with epoxy-modified silicone resin. Soft magnetic composites were prepared by compaction and annealing treatment of the coated powders. The coating…
read more here.
Keywords:
soft magnetic;
microscopy;
znfe2o4 layer;
low core ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Journal of Superconductivity and Novel Magnetism"
DOI: 10.1007/s10948-017-4115-4
Abstract: Iron-borosilicate magnetic composites could be applied as a soft magnetic material in high temperature and high frequency applications. In this research, the magnetic properties of soft magnetic composites with different iron particle sizes made by…
read more here.
Keywords:
soft magnetic;
magnetic properties;
magnetic composites;
iron ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Acta Materialia"
DOI: 10.1016/j.actamat.2018.01.001
Abstract: Abstract Nitric acid oxidation has been used to fabricate insulation coatings of the FeSiAl soft magnetic composites (SMCs). Growth mechanism of the coatings obtained with varied HNO3 concentration has been systematically studied based on careful…
read more here.
Keywords:
hno3;
oxidation;
soft magnetic;
fesial soft ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Carbohydrate polymers"
DOI: 10.1016/j.carbpol.2017.06.029
Abstract: The present study was focused on Cr(VI) removal using eco-friendly materials like cellulose (Cel), hydrotalcite (HT), hydroxyapatite (HAp) and their composite forms. The cellulose/hydrotalcite (CelHT) and cellulose/hydroxyapatite (CelHAp) composites were synthesized by dispersing HT and…
read more here.
Keywords:
cellulose;
fabrication magnetic;
supported magnetic;
magnetic composites ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.09.015
Abstract: Abstract Fibres-based soft magnetic composites (FSMCs) have been prepared by using Fe fibres of different diameters (65, 125, 250 and 500 μm). The Fe fibres were coated with a 3 μm thick layer of Fe3O4 via the…
read more here.
Keywords:
fibres based;
influence;
soft magnetic;
based soft ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.11.241
Abstract: Abstract Amorphous soft magnetic composites based on spherical Fe76Si9B10P5 amorphous powder made by gas atomization and (NiZn)Fe2O4 nanoparticles dispersed in epoxy resin are investigated in details. Scanning electron microscopy and energy-dispersive X-ray spectroscopy analysis revealed…
read more here.
Keywords:
significant enhancement;
soft magnetic;
fe2o4 nanoparticles;
magnetic composites ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.06.378
Abstract: Abstract A novel Ti-doped Fe-6.5Si soft magnetic composites (SMCs) was prepared in this work. Effects of doping Ti on magnetic performances of Fe-6.5Si SMCs were investigated. The results show that only α-Fe(Si,Ti) phase can be…
read more here.
Keywords:
5si smcs;
5si soft;
soft magnetic;
performances 5si ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152803
Abstract: Abstract In this work, Fe–Si/Fe2SiO4 soft magnetic composites (SMCs) are prepared successfully via sintering Fe-6.5 wt%Si/α-Fe2O3 core-shell composite powders obtained by ball milling. The transformation mechanism from Fe-6.5 wt%Si/α-Fe2O3 to Fe–Si/Fe2SiO4 is revealed in detail. The effect…
read more here.
Keywords:
soft magnetic;
core;
magnetic composites;
fe2o3 core ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.154533
Abstract: Abstract Fe@Composite-Ferrite soft magnetic composites (SMCs) were successfully fabricated by ions doping on the surface of Fe@Fe3O4 powders which can improve the thermal stability and insulation. Compared with the traditional SMCs which were constructed by…
read more here.
Keywords:
ferrite coating;
ferrite;
soft magnetic;
composite ferrite ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.155215
Abstract: Abstract The effect of Fe nanoparticles with mass fraction of 0-7 wt% on the microstructure and soft magnetic properties of the Fe-6.5 wt%Si soft magnetic composites (SMCs) was investigated. The results show that the pores between Fe-6.5 wt%Si…
read more here.
Keywords:
nanoparticles microstructure;
soft magnetic;
magnetic properties;
magnetic composites ... See more keywords