Photo from academic.microsoft.com
Sign Up to like & get
recommendations!
0
Published in 2018 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201700687
Abstract: Titanium-Tantalum coatings are deposited by magnetron co-sputtering technique, using independently driven titanium and tantalum targets. The effect of the Ta content on the structure, mechanical, and wear properties of Ti films is investigated. It is…
read more here.
Keywords:
magnetron sputtering;
characterization coatings;
tribo mechanical;
mechanical characterization ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Fuel Cells"
DOI: 10.1002/fuce.201600227
Abstract: The possibility of fabricating large-area solid oxide fuel cells (SOFC) with thin film electrolyte using a commercial physical vapor deposition technology is investigated. Yttria-stabilized zirconia (YSZ)/gadolinium-doped ceria (GDC) bilayer electrolyte is successfully deposited on a…
read more here.
Keywords:
fuel cells;
scale solid;
fuel;
solid oxide ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-019-0342-x
Abstract: A numerical study has been conducted on thermal dissipation fin shape of the magnetron of a microwave oven. The main focus of the study was on reducing the bypass away from cooling air around cooling…
read more here.
Keywords:
study thermal;
microwave oven;
study;
magnetron ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01714-z
Abstract: Hospital care-assisted infections introduce problems like prolonged hospital stay, additional financial burden and higher death rate. Since copper is registered by US Environmental Protection Agency as the only solid antimicrobial metal, it could be used…
read more here.
Keywords:
magnetron sputtered;
sputtered copper;
copper;
copper thin ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Acta Metallurgica Sinica (english Letters)"
DOI: 10.1007/s40195-017-0609-0
Abstract: The Cr–Si–N coatings were prepared by combining system of high-power impulse magnetron sputtering and pulsed DC magnetron sputtering. The Si content in the coating was adjusted by changing the sputtering power of the Si target.…
read more here.
Keywords:
magnetron sputtering;
high power;
content;
magnetron ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Acta biomaterialia"
DOI: 10.1016/j.actbio.2019.05.060
Abstract: Magnesium based alloys are of great interest for temporary medical applications. In order to tailor the corrosion rate, Mg is often alloyed with other elements for the envisaged application as a biodegradable medical implant. In…
read more here.
Keywords:
freestanding mgag;
corrosion rate;
corrosion;
magnetron ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.09.059
Abstract: Abstract In the last years the potential of combining the attractive materials characteristics of graphene related materials and silver nanostructures for SERS and metamaterials has emerged. Here, we report of graphene oxide thin films deposited…
read more here.
Keywords:
graphene oxide;
thin films;
magnetron;
silver thin ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.05.273
Abstract: Abstract Traditionally porous silicon based photonic structures have been prepared by electrochemically etching of silicon. In this work, porous multilayers of nanocolumnar SiOx and SiO2 thin films acting as near infrared (NIR) 1D-photonic nanostructures are…
read more here.
Keywords:
photonic structures;
magnetron;
magnetron sputtered;
deposition ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.145106
Abstract: Abstract High power impulse magnetron sputtering (HiPIMS) technology has attracted lots of attention due to its high target ionization rate. This characteristic is desirable in preparing metal compounds with complex valence states. In the current…
read more here.
Keywords:
magnetron sputtering;
high power;
power impulse;
films deposited ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2021.151239
Abstract: Abstract In this work, novel W-Zr-B coatings were developed by a hybrid process combining pulsed laser deposited ZrB2 and radio frequency magnetron sputtered W2B5. The influence of the laser power density on the structure and…
read more here.
Keywords:
coatings deposited;
deposited hybrid;
mechanical properties;
properties coatings ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2022 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2021.151265
Abstract: Abstract An atomistic study of the W and Be mixing during magnetron sputtering deposition using the SRIM software based on the binary collision simulation by Monte Carlo method is presented. The calculations performed clearly show…
read more here.
Keywords:
magnetron sputtering;
nanoscale multilayers;
sputtering deposition;
multilayers intermixing ... See more keywords