Investigating the impact of manufacturing process on the ecotoxicity of carbon nanofibers: a multi-aquatic species comparison.
Sign Up to like & getrecommendations! Published in 2019 at "Environmental toxicology and chemistry"
DOI: 10.1002/etc.4537
Abstract: Manufactured nanomaterial production is out pacing the ability to investigate environmental hazard using current regulatory paradigms, causing a backlog of materials requiring testing. To ameliorate this issue, regulatory bodies have proposed integrating safety into the… read more here.
Keywords: impact manufacturing; manufacturing process; ecotoxicity; investigating impact ... See more keywords
Towards the validation of manufacturing simulations by means of digital twins: conception, implementation and data acquisition for a composite aircraft moveable manufacturing process
Sign Up to like & getrecommendations! Published in 2025 at "CEAS Aeronautical Journal"
DOI: 10.1007/s13272-024-00800-3
Abstract: Simulations are used in the development of structures. These methods and their results are increasingly applied on the way toward a more analysis-based certification process for aircraft structures. The absolute basis for being considered as… read more here.
Keywords: process; aircraft; digital twin; validation ... See more keywords
Meshfree Simulations for Additive Manufacturing Process of Metals
Sign Up to like & getrecommendations! Published in 2019 at "Integrating Materials and Manufacturing Innovation"
DOI: 10.1007/s40192-019-00131-w
Abstract: We present a meshfree direct numerical simulation (DNS) capability for the additive manufacturing (AM) process of metals based on the hot optimal transportation meshfree (HOTM) method. The HOTM method is a meshfree thermomechanical Lagrangian computational… read more here.
Keywords: process metals; hotm method; manufacturing process; process ... See more keywords
Influence of manufacturing process on fatigue resistance of high strength steel bolts for connecting rods
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2019.104330
Abstract: Abstract The connecting rod (or conrod) is an important component of an internal combustion engine. An eventual failure of the bolts clamping the big end of conrods can cause failure of the engine; for this… read more here.
Keywords: manufacturing process; phosphate coating; influence manufacturing; steel ... See more keywords
Dynamic changes in the metabolite profile and taste characteristics of Fu brick tea during the manufacturing process.
Sign Up to like & getrecommendations! Published in 2020 at "Food chemistry"
DOI: 10.1016/j.foodchem.2020.128576
Abstract: Fu brick tea is a typical post-fermentation tea known for its special flavor and health benefits. Liquid chromatography-mass spectrometry, and sensory evaluation with multivariate analysis were used to characterize the dynamic changes in metabolite profile… read more here.
Keywords: manufacturing process; brick tea; process; dynamic changes ... See more keywords
Using data mining methods for manufacturing process control
Sign Up to like & getrecommendations! Published in 2017 at "IFAC-PapersOnLine"
DOI: 10.1016/j.ifacol.2017.08.986
Abstract: Abstract The Industry 4.0 concept assumes that modern manufacturing systems generate huge amounts of data that must be collected, stored, managed and analysed. The case study is focused on predicting the manufacturing process behaviour according… read more here.
Keywords: data mining; control; manufacturing process; process ... See more keywords
Manufacturing Process Design of a Micro-Scale Liquid-Liquid Extractor and Multi-phase Separator
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2020.04.034
Abstract: Abstract Advances in process innovation within the chemical process industry are impeded by the cost of producing new innovative components. In this paper, various manufacturing process routes were evaluated for scaling up a micro-scale liquid-liquid… read more here.
Keywords: separator; liquid; manufacturing process; binder jetting ... See more keywords
Multi-objective optimal design of motion precision for fork robot arm in LCD panel manufacturing process system
Sign Up to like & getrecommendations! Published in 2019 at "Microelectronics Reliability"
DOI: 10.1016/j.microrel.2019.05.003
Abstract: Abstract This paper tried to study the robot arm applied to the LCD panel manufacturing process. There is a fork structure in the robot arm used to perform the stretch into/back the glass-base board cassette.… read more here.
Keywords: manufacturing process; robot arm; precision;
Alternative manufacturing process of 3-dimensional interconnect device using thermoforming process
Sign Up to like & getrecommendations! Published in 2021 at "Microelectronics Reliability"
DOI: 10.1016/j.microrel.2021.114373
Abstract: Abstract In early stages, the electronic circuits have been developed on simple printed circuit boards with multiple copper patterns and components interconnected by lead – free solder. Later on, these are converted to flexible circuits… read more here.
Keywords: manufacturing process; circuit; process; alternative manufacturing ... See more keywords
The manufacturing process and spectral features of tilted fiber Bragg gratings
Sign Up to like & getrecommendations! Published in 2021 at "Optics and Laser Technology"
DOI: 10.1016/j.optlastec.2020.106615
Abstract: Abstract The controllable cross-sensitivities of tilted fiber Bragg gratings (TFBGs) are strongly related to the control of the parameters during the manufacturing process. The TFBG spectrum characterization, which can demonstrate cross-sensitivities, is controlled by the… read more here.
Keywords: bragg gratings; tilted fiber; process; fiber bragg ... See more keywords
A Generic Sustainability Assessment Model towards Consolidated Parts Fabricated by Additive Manufacturing Process
Sign Up to like & getrecommendations! Published in 2017 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2017.07.086
Abstract: Abstract Part consolidation (PC) is one of the effective ways to simplify product structure. Through part consolidation, it is expected to reduce weight and size, minimize assembly operation, improve performance, and prolong service life. As… read more here.
Keywords: manufacturing process; model; manufacturing; additive manufacturing ... See more keywords