The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings
Sign Up to like & getrecommendations! Published in 2017 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-017-2054-x
Abstract: ObjectiveThis in vitro study investigated the marginal fit of metal and zirconia copings before and after veneering on dies with shoulder/chamfer (s/c) finish lines.Materials and methodsUsing CAD/CAM, ten (n = 10) each s/c zirconia (NZ) copings and… read more here.
Keywords: cam; copy milled; marginal fit; cad cam ... See more keywords
A comparison of the marginal fit and mechanical properties of a zirconia dental crown using CAM and 3DSP
Sign Up to like & getrecommendations! Published in 2019 at "Rapid Prototyping Journal"
DOI: 10.1108/rpj-03-2018-0053
Abstract: Purpose This study aims to compare the marginal fit, flexural strength and hardness for a ceramic premolar that is constructed using dental computer aided machining (CAM) and three-dimensional slurry printing (3DSP). Design/methodology/approach Dental CAM and… read more here.
Keywords: flexural strength; cam 3dsp; marginal fit; zirconia dental ... See more keywords
Mechanical properties and marginal fit of prefabricated versus customized dental implant abutments: A comparative study.
Sign Up to like & getrecommendations! Published in 2022 at "Clinical implant dentistry and related research"
DOI: 10.1111/cid.13130
Abstract: INTRODUCTION Dental implant abutments play an important role in the health and aesthetics of soft and hard tissues around implants. PURPOSE To compare mechanical properties and marginal fit of prefabricated and customized dental implant abutments… read more here.
Keywords: dental implant; mechanical properties; marginal fit; customized abutments ... See more keywords
Influence of porcelain firing on changes in the marginal fit of metal-ceramic fixed partial dental prostheses fabricated with laser sintering: An in vivo study.
Sign Up to like & getrecommendations! Published in 2020 at "Dental and medical problems"
DOI: 10.17219/dmp/114196
Abstract: BACKGROUND Marginal fit is the most important criterion in the evaluation of the clinical acceptability of fixed restorations. Due to cement solubility and plaque retention, marginal gaps are potentially harmful to both the teeth and… read more here.
Keywords: axial occlusal; porcelain firing; marginal fit; metal ... See more keywords
Evaluation of the marginal fit of monolithic crowns fabricated by direct and indirect digitization.
Sign Up to like & getrecommendations! Published in 2021 at "Journal of prosthodontic research"
DOI: 10.2186/jpr.jpr_d_20_00003
Abstract: Purpose To evaluate the influence of intraoral and extraoral digitization systems on marginal discrepancy of monolithic lithium disilicate and monolithic zirconia computer-aided design-computer-aided manufacturing (CAD-CAM) crowns.Methods Forty standardized machined stainless steel specimens with the characteristics… read more here.
Keywords: monolithic crowns; marginal fit; lithium disilicate; digitization ... See more keywords
The Effect of a Digital Manufacturing Technique, Preparation Taper, and Finish Line Design on the Marginal Fit of Temporary Molar Crowns: An In-Vitro Study
Sign Up to like & getrecommendations! Published in 2023 at "Biomedicines"
DOI: 10.3390/biomedicines11020570
Abstract: The aim of this study is to investigate the combined effect of a digital manufacturing technique (subtractive vs. additive), preparation taper (10° vs. 20° TOC), and finish line (chamfer vs. shoulder) on the marginal adaptation… read more here.
Keywords: preparation; finish line; line; marginal fit ... See more keywords
Marginal Fit of Porcelain Laminate Veneer Materials under Thermocycling Condition: An In-Vitro Study
Sign Up to like & getrecommendations! Published in 2023 at "Dentistry Journal"
DOI: 10.3390/dj11010012
Abstract: Objective: The purpose of this study was to evaluate the cervical marginal fit of porcelain laminate veneer (PLV) restorations made from two different types of CAD/CAM ceramic laminates: CEREC C PC and E.max (LD). Materials… read more here.
Keywords: fit; veneer; cervical marginal; fit porcelain ... See more keywords
Reliability of Metal 3D Printing with Respect to the Marginal Fit of Fixed Dental Prostheses: A Systematic Review and Meta-Analysis
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13214781
Abstract: Three-dimensional (3D) printing technologies have been widely used to manufacture crowns and frameworks for fixed dental prostheses. This systematic review and meta-analysis aimed to assess the reliability of the marginal fit of 3D-printed cobalt-chromium-based fixed… read more here.
Keywords: dental prostheses; fit fixed; marginal fit; fixed dental ... See more keywords
Effect of Different CAD/CAM Milling and 3D Printing Digital Fabrication Techniques on the Accuracy of PMMA Working Models and Vertical Marginal Fit of PMMA Provisional Dental Prosthesis: An In Vitro Study
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14071285
Abstract: Background: Minimal evidence exists on the efficacy of different digital manufacturing techniques in the fabrication of precise dental working models and provisional prosthesis. Aim of study: The objective was to evaluate the effect of two… read more here.
Keywords: fabrication techniques; cad cam; marginal fit; prosthesis ... See more keywords
Assessment of the readiness of restorations manufactured by CAD/CAM in terms of marginal fit (Part I)
Sign Up to like & getrecommendations! Published in 2022 at "PeerJ"
DOI: 10.7717/peerj.13280
Abstract: Background The master cast is the gold standard for the control and eventual adjustment of restorations produced by conventional procedures. Some digital workflow bypasses the master cast and relies completely on the precision of the… read more here.
Keywords: cad cam; master cast; marginal fit; readiness restorations ... See more keywords