An unconventional method for calculating porosity of marine clay deposits using the 2D resistivity method
Sign Up to like & getrecommendations! Published in 2020 at "Near Surface Geophysics"
DOI: 10.1002/nsg.12123
Abstract: ABSTRACT Various methods were earlier designed to calculate porosity of a formation, but many of them are reliant on physical soil sampling and/or laboratory measurements. The present work examines a recently proposed method, which we… read more here.
Keywords: resistivity; marine clay; porosity; method ... See more keywords
Microstructural and mechanical properties of marine clay cemented with industrial waste residue-based binder (IWRB)
Sign Up to like & getrecommendations! Published in 2021 at "Acta Geotechnica"
DOI: 10.1007/s11440-021-01332-4
Abstract: Improving the engineering properties of low-strength soft clay in an environmentally friendly way becomes a challenge in coastal areas. Conventional ground treatment techniques for marine clay using cement can cause significant environmental pollution. In this… read more here.
Keywords: waste residue; mechanical properties; industrial waste; clay ... See more keywords
Predicting the Effective Depth of Soil Stabilization for Marine Clay Treated by Biomass Silica
Sign Up to like & getrecommendations! Published in 2018 at "KSCE Journal of Civil Engineering"
DOI: 10.1007/s12205-018-1294-x
Abstract: Reclamation and development towards the oceanic area had become a trend of modern days, where the marine soil need to be treated prior construction. The increase in unconfined compressive strength of marine clay treated by… read more here.
Keywords: stabilization; marine clay; clay treated; clay ... See more keywords
Stress-dependent consolidation characteristics of marine clay in the Northern Arabian Gulf
Sign Up to like & getrecommendations! Published in 2018 at "Ain Shams Engineering Journal"
DOI: 10.1016/j.asej.2017.05.001
Abstract: Abstract The main objective of this paper is to study the variation of the coefficient of consolidation ( Cv ) with stress level for the marine clay in the Northern Arabian Gulf. Undisturbed samples were… read more here.
Keywords: clay northern; consolidation; arabian gulf; stress ... See more keywords
Dual waste utilization in ultra-high performance concrete using biochar and marine clay
Sign Up to like & getrecommendations! Published in 2021 at "Cement and Concrete Composites"
DOI: 10.1016/j.cemconcomp.2021.104049
Abstract: Abstract Ultra-high performance concrete (UHPC) contains substantial amount of quartz powder (QP) which is expensive and carcinogenic. Partial replacement of QP with excavation wastes such as marine clays can help curtail its environmental impact. However,… read more here.
Keywords: marine clay; concrete; waste; ultra high ... See more keywords
Hydration, strength and microstructure evaluation of eco-friendly mortar containing waste marine clay
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.122784
Abstract: Abstract Waste marine clay, a commonly found natural deposit in coastal regions, can serve as partial cement alternative in mortar after thermal treatment, thus facilitate sustainable urban development without polluting the environment. This paper studied… read more here.
Keywords: strength; waste marine; mortar; clay ... See more keywords
Measuring the engineering properties of marine clay treated with disposed granite waste
Sign Up to like & getrecommendations! Published in 2019 at "Measurement"
DOI: 10.1016/j.measurement.2018.08.053
Abstract: Abstract Granite tile dust is a waste material produced in large amounts during the cutting and grinding processes of granite tiles at manufacturing factories and construction sites. Generally, it is dumped as a slurry containing… read more here.
Keywords: engineering properties; marine clay; properties marine; waste ... See more keywords
Response of flexible monopile in marine clay under cyclic lateral load
Sign Up to like & getrecommendations! Published in 2018 at "Ocean Engineering"
DOI: 10.1016/j.oceaneng.2017.10.022
Abstract: Abstract While monopile foundation is widely used at sandy site in Europe, it is designed and constructed in intertidal zone used only in China so far. Comparing with sandy site, intertidal site typically has different… read more here.
Keywords: lateral load; monopile; cyclic lateral; marine clay ... See more keywords
In-situ evaluation of undrained shear strength from seismic piezocone penetration tests for soft marine clay in Jiangsu, China
Sign Up to like & getrecommendations! Published in 2019 at "Transportation Geotechnics"
DOI: 10.1016/j.trgeo.2019.100253
Abstract: Abstract Undrained shear strength, s u is an important geotechnical parameter of soft clay. The seismic piezocone test (SCPTU) can provide valuable information regarding in-situ soil behavior and stratigraphy in geotechnical site investigation. Therefore, the… read more here.
Keywords: marine clay; undrained shear; seismic piezocone; strength ... See more keywords
One-Dimensional Compression Behavior of Calcareous Sand and Marine Clay Mixtures
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Geomechanics"
DOI: 10.1061/(asce)gm.1943-5622.0001763
Abstract: Abstract More and more oceanic projects involve calcareous sand–marine clay mixtures which behave totally different from pure calcareous sand and marine clay. The effect of clay content on the comp... read more here.
Keywords: calcareous sand; sand marine; marine clay; clay ... See more keywords
Test fill to failure on soft plastic marine clay at Onsøy, Norway
Sign Up to like & getrecommendations! Published in 2018 at "Canadian Geotechnical Journal"
DOI: 10.1139/cgj-2017-0078
Abstract: A test fill at Onsoy, close to the town of Fredrikstad in Norway, was built on a very soft marine clay with in situ vane strength as low as 11 kPa and a plasticity index… read more here.
Keywords: marine clay; failure; test fill; second stage ... See more keywords