Sign Up to like & get recommendations! 1
Published in 2018 at "Shape Memory and Superelasticity"
DOI: 10.1007/s40830-018-0155-2
Abstract: The interaction between dislocations and martensitic transformations in Cu–Al–Ni alloys is shortly reviewed. Results from many researchers are critically analyzed towards a clear interpretation of the relevant role played by dislocations on the properties of… read more here.
Sign Up to like & get recommendations! 0
Published in 2021 at "Acta Materialia"
DOI: 10.1016/j.actamat.2021.116665
Abstract: Abstract Precipitation of Ni4Ti3 is effective in tuning martensitic transformations (MTs) in NiTi shape memory alloys (SMAs). However, several fundamental issues concerning the influence of Ni4Ti3 on MTs remain unclear. In this study, the microstructure… read more here.
Sign Up to like & get recommendations! 0
Published in 2018 at "International Journal of Plasticity"
DOI: 10.1016/j.ijplas.2018.07.007
Abstract: Abstract Cyclic thermomechanical loading tests were performed on a medical grade superelastic NiTi wire in wide temperature range −100 °C - +200 °C. It was observed, that plastic unrecoverable deformation occurs only when forward or reverse martensitic… read more here.
Sign Up to like & get recommendations! 0
Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2021.129732
Abstract: Abstract The purpose of the paper was to investigate the martensitic transformation and its kinetic of the Ti-Ni-Cu-Hf shape memory alloy. The Ti47Ni44Cu6Hf3 alloy would undergo a reversible B2↔B19′ martensitic transformation during thermal cycling process.… read more here.
Sign Up to like & get recommendations! 1
Published in 2021 at "Theoretical and Applied Fracture Mechanics"
DOI: 10.1016/j.tafmec.2021.102952
Abstract: Abstract In-situ tensile testing of electrochemically hydrogen charged 304L stainless steel at different crosshead displacement rates results in a largely different elongation at fracture compared to the corresponding test in air. At slow engineering strain… read more here.
Sign Up to like & get recommendations! 0
Published in 2018 at "AIP Advances"
DOI: 10.1063/1.5041954
Abstract: As-solidified Ni48Co2Mn35In15 ribbons were prepared through the melt-spinning method, and their structural, magnetic, magnetocaloric properties, and martensitic transformations were investigated. The inverse martensitic transformation temperature (TA=325 K) for the melt spun ribbons shifted by 55… read more here.
Sign Up to like & get recommendations! 0
Published in 2018 at "Physics of Metals and Metallography"
DOI: 10.1134/s0031918x17120079
Abstract: Differential scanning calorimetry has been used to study the effect of the temperature and holding time upon isothermal annealing on the calorimetric effects of the martensitic transformations (MTs) of an aging Ti–50.7 at % Ni… read more here.
Sign Up to like & get recommendations! 0
Published in 2023 at "Problems of Atomic Science and Technology"
DOI: 10.46813/2023-144-037
Abstract: The proposed model is based on the use of the principle of detailed equilibrium, which occurs during phase transitions of the crystal lattice. This theory complements the theory of Landau phase transitions in crystalline media,… read more here.