High-performance gas separation using mixed-matrix composite membranes containing graphene nanoplatelets
Sign Up to like & getrecommendations! Published in 2020 at "Polymer Bulletin"
DOI: 10.1007/s00289-020-03467-y
Abstract: Mixed-matrix composite membrane (MMCM) made from a dense selective layer filled with various filler on the top of a porous support layer is an effective method to obtain high gas separation performance compared to the… read more here.
Keywords: gas separation; layer; gas; mixed matrix ... See more keywords
Microstructure and properties of in-situ TiB 2 matrix composite coatings prepared by plasma spraying
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.04.107
Abstract: Abstract TiB 2 -TiC and Ti-B 4 C composite powders were plasma sprayed onto the 45 steel substrates, respectively, for preparing TiB 2 matrix composite coatings. The microstructure and properties of as-prepared coatings were investigated… read more here.
Keywords: prepared plasma; matrix composite; microstructure; tib tic ... See more keywords
Facile electrodeposition of three-dimensional flower-like structure of nickel matrix composite electrodes for hydrogen evolution reaction
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.143768
Abstract: Abstract Two kinds of three-dimensional flower-like structure of nickel matrix composite electrodes with activated carbon (AC) or 50 nm carbon (C) particles have been successfully synthesized by a facile one-step composite electrodeposition process in a deep… read more here.
Keywords: flower like; like structure; structure nickel; three dimensional ... See more keywords
Effect of hBN and SiC addition on laser assisted processing of ceramic matrix composite coatings
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.12.245
Abstract: Abstract To develop TiB2–TiN–SiC and TiB2–TiN–SiC-hBN based ceramic matrix composite coatings with superior mechanical and tribological properties suitable for engineering applications, a high-power CW-laser is used to initiate chemical reactions in precursor powder mixtures (TiO2,… read more here.
Keywords: hbn; ceramic matrix; tib2 tin; tin sic ... See more keywords
Chitosan/polybenzoxazine/clay mixed matrix composite aerogels: preparation, physical properties, and water absorbency
Sign Up to like & getrecommendations! Published in 2020 at "Applied Clay Science"
DOI: 10.1016/j.clay.2019.105403
Abstract: Abstract The present study reports development of chitosan/polybenzoxazine/clay mixed matrix composite aerogels (MMCAs) using freeze-drying of various sodium montmorillonite (Na-MMT) colloidal dispersions in chitosan/benzoxazine polymers blend in aqueous solution. Thermal treatment of aerogels leads to… read more here.
Keywords: polybenzoxazine clay; chitosan polybenzoxazine; clay mixed; mixed matrix ... See more keywords
To study the effect of different reinforcements on various parameters in aluminium matrix composite during CNC turning
Sign Up to like & getrecommendations! Published in 2020 at "Composites Communications"
DOI: 10.1016/j.coco.2020.100504
Abstract: Abstract Metal matrix composites are catching the eyeballs of various industries because of their enhanced properties like higher strength value over lesser weight, good stiffness and satisfies wide applications throughout. But to bring composite to… read more here.
Keywords: base alloy; residual stress; value; matrix composite ... See more keywords
A novel approach to in-situ produce functionally graded silicon matrix composite materials by selective laser melting
Sign Up to like & getrecommendations! Published in 2017 at "Composite Structures"
DOI: 10.1016/j.compstruct.2017.03.096
Abstract: Abstract In this work, a functionally graded silicon matrix composite material was in-situ manufactured by a self-developed Magnetic Field assisted Selective Laser Melting (MF-SLM) system free of cracks. A mixture of powders in proportion 50%… read more here.
Keywords: selective laser; functionally graded; silicon; graded silicon ... See more keywords
Processing, microstructure and mechanical properties of in-situ Ti3Al+TiAl matrix composite reinforced with Ti2AlC particles prepared by centrifugal casting
Sign Up to like & getrecommendations! Published in 2018 at "Intermetallics"
DOI: 10.1016/j.intermet.2018.04.012
Abstract: Abstract The samples of in-situ α2(Ti3Al) + γ(TiAl) matrix composite reinforced with Ti2AlC particles were prepared by a centrifugal casting of Ti-46.4Al-5.1Nb-1C-0.2B (at.%) alloy. The microstructure of the as-cast samples consists of equiaxed nearly lamellar α2 + γ grains… read more here.
Keywords: ti2alc particles; situ ti3al; ti3al tial; tial matrix ... See more keywords
Nanocrystalline Ti/AZ61 magnesium matrix composite: Evolution of microstructure and mechanical property during annealing treatment
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.01.136
Abstract: Abstract Nanocrystalline Ti/AZ61 magnesium matrix composite, prepared by mechanical milling, was annealed in the temperature range of 573–723 K for various durations. During annealing treatment, diffusion of Al and Ti elements, formation of precipitates and grain… read more here.
Keywords: evolution; annealing treatment; magnesium; magnesium matrix ... See more keywords
Evolution of microstructure and mechanical properties of Ti/TiB metal-matrix composite during isothermal multiaxial forging
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.08.215
Abstract: Abstract Mechanical behavior and microstructure evolution of a Ti/TiB metal-matrix composite during multiaxial forging (MAF) at 700 and 850 °C and a strain rate 10−3 s−1 were studied. The composite was produced via in-situ 3Ti + TiB2→2Ti+2TiB reaction… read more here.
Keywords: tib metal; matrix; microstructure; metal matrix ... See more keywords
Effect of reduced graphene oxide nanoplatelets content on the mechanical and electrical properties of copper matrix composite
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.07.183
Abstract: Abstract The homogeneous distribution of graphene nanoplatelets within a metal matrix is of utmost importance in producing high-performance metal matrix composites with superior mechanical and physical properties. In this study, graphene-reinforced copper matrix composite powder… read more here.
Keywords: copper matrix; matrix; spectroscopy; graphene oxide ... See more keywords