Structural and magnetic properties of FeCoC system obtained by mechanical alloying
Sign Up to like & getrecommendations! Published in 2017 at "Hyperfine Interactions"
DOI: 10.1007/s10751-017-1419-5
Abstract: Fe96−XCoXC4 (x = 0, 10, 20, 30, 40 at. %) alloys were obtained by mechanical alloying of Fe, C and Co powders using high-energy milling. The structural and magnetic properties of the alloy system were… read more here.
Keywords: structural magnetic; system; mechanical alloying; obtained mechanical ... See more keywords
Thermoelectric properties of CoSb3 and CoSb3/SiC composites prepared by mechanical alloying and microwave sintering
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-6824-7
Abstract: Pure CoSb3 and 0.1 vol% nano-SiC-composited CoSb3 were prepared by mechanical alloying and subsequent fast microwave sintering. The electrical transport properties display totally different behaviors in microwave-annealed CoSb3 and CoSb3/SiC composites, implying their susceptibility to… read more here.
Keywords: cosb3; prepared mechanical; mechanical alloying; cosb3 cosb3 ... See more keywords
A Study of Mechanical Alloying of an Aluminum Composite Material Reinforced with Silicon Carbide Particles
Sign Up to like & getrecommendations! Published in 2019 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-019-00419-w
Abstract: A composite material based on alloy V95 containing 10% silicon carbide and prepared by powder metallurgy is studied. Composite granules are fabricated by mechanical alloying in a planetary mill in an inert gas atmosphere. It… read more here.
Keywords: mechanical alloying; silicon carbide; composite material; structure ... See more keywords
Stages of Mechanical Alloying in Systems with Different Solubility Cu–Zn and Au–Co in the Case of Cold and Low-Temperature Deformation by Torsion Under Pressure
Sign Up to like & getrecommendations! Published in 2018 at "Russian Physics Journal"
DOI: 10.1007/s11182-018-1481-8
Abstract: Methods of X-ray structural analysis and durometry, as well as electron microscopy were used to identify the stages of mechanical alloying in the case of torsion under high quasi-hydrostatic pressure on Bridgman anvils in the… read more here.
Keywords: temperature; mechanical alloying; case; deformation ... See more keywords
Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics
Sign Up to like & getrecommendations! Published in 2020 at "Science China Technological Sciences"
DOI: 10.1007/s11431-020-1657-7
Abstract: To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements.… read more here.
Keywords: sibcnzr composites; mechanical alloying; sibcn ceramics; resistance ... See more keywords
Microstructure and Mechanical Properties of Nanostructured CoCrFeMoTi High-Entropy Alloy Fabricated by Mechanical Alloying and Spark Plasma Sintering
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04501-5
Abstract: CoCrFeMoTi high-entropy alloy (HEA) was synthesized using mechanical alloying and spark plasma sintering. The corresponding microstructural features and phase composition were compared with those of CoCrFeNi, CoCrFeNiTix (x = 0, 0.3 and 0.5) and CoCrFeNiMox (x = 0, 0.3,… read more here.
Keywords: entropy alloy; mechanical alloying; spark plasma; alloying spark ... See more keywords
Characterization and Properties of CuZrAlTiNiSi High Entropy Alloy Coating Obtained By Mechanical Alloying and Vacuum Hot-Pressing Sintering
Sign Up to like & getrecommendations! Published in 2020 at "JOM"
DOI: 10.1007/s11837-020-04005-x
Abstract: The CuZrAlTiNiSi high entropy alloy coating (HEAC) was synthesized on T10 substrate using mechanical alloying and vacuum hot-pressing sintering technique. The results show that the final product of as-milled powders is amorphous HEA phase with… read more here.
Keywords: cuzraltinisi high; alloying vacuum; entropy alloy; mechanical alloying ... See more keywords
In-Situ Synthesis of Aluminum Matrix Composite from Al–NiO System by Mechanical Alloying
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00549-z
Abstract: Abstract In this paper, Al-based composites reinforced by Alumina and Al–Ni intermetallic compounds have been successfully fabricated by mechanical alloying technique. The intermetallic phase, i.e., NiAl, NiAl 3 , Ni 2 Al 3 , as… read more here.
Keywords: system; nio; mechanical alloying; matrix ... See more keywords
Characterization of Ti–Al Intermetallic Synthesized by Mechanical Alloying Process
Sign Up to like & getrecommendations! Published in 2020 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00603-w
Abstract: Abstract Mechanical alloying (MA) of Al60Ti40 (wt%) has been successfully done by using a planetary ball mill having mixed balls of 5 mm and 15 mm diameter to refine the crystallite size of the elemental powder and… read more here.
Keywords: mechanical alloying; intermetallic synthesized; characterization intermetallic; synthesized mechanical ... See more keywords
Influence of Mechanical Alloying Time on Microstructure and Wear Behaviors of Fe–Cu–C Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Metals and Materials International"
DOI: 10.1007/s12540-020-00711-y
Abstract: Abstract In the present study, the influence of mechanical alloying time on microstructure and wear behavior was investigated for Fe–Cu–C alloy produced with powder metallurgy method. Within the scope of the study, Fe, Cu and… read more here.
Keywords: alloying time; mechanical alloying; influence mechanical; time ... See more keywords
Evaluation of Different Parameters on Production of Zr2Cu by Mechanical Alloying
Sign Up to like & getrecommendations! Published in 2017 at "Silicon"
DOI: 10.1007/s12633-017-9588-z
Abstract: Intermetallic compounds because of their high melting point temperature, good mechanical properties, and high corrosion resistance are attractive. The Zr2Cu intermetallic compound can be produced by a mechanical alloying method. In this study, alloying was… read more here.
Keywords: different parameters; zr2cu mechanical; production zr2cu; mechanical alloying ... See more keywords