Effects of Annealing on Mechanical and Corrosion Properties of As-Extruded NQZ310K Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04643-x
Abstract: The as-extruded NQZ310K (Mg-3.0Nd-1.0Ag-0.2Zn-0.4Zr, mass fraction) alloy was annealed at 300, 350, 400, 450, and 500 °C, respectively. Microstructures of the alloy were observed by an optical microscope and a scanning electron microscope equipped with an… read more here.
Keywords: alloy; effects annealing; corrosion properties; extruded nqz310k ... See more keywords
Microstructure, mechanical and corrosion properties of Mg–Zn–Nd alloy with different accumulative area reduction after room-temperature drawing
Sign Up to like & getrecommendations! Published in 2020 at "Rare Metals"
DOI: 10.1007/s12598-020-01460-y
Abstract: Good mechanical properties and corrosion resistance are the key factors for the application of biodegradable magnesium alloy wires as new medical implant materials. This study is aimed at investigating the influence of microstructural evolution on… read more here.
Keywords: alloy; usepackage; document; corrosion ... See more keywords
Influence of pulse reverse current on mechanical and corrosion resistance properties of Ni-MoSe2 nanocomposite coatings
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.06.239
Abstract: Abstract The Ni-MoSe2 nanocomposite coating was successfully prepared on mild steel specimen using pulse reverse current technique by varying its duty cycle and frequency at the fixed concentration of 2.5 g/ L of MoSe2 nanoparticles in Watt's… read more here.
Keywords: nanocomposite coatings; mechanical corrosion; corrosion resistance; reverse current ... See more keywords
Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.08.120
Abstract: Abstract The TixNixCu50-xZr50-x (X = 25,30,35,40) alloys with 2 mm in diameter were prepared by copper mold casting method studied in terms of fracture behavior, mechanical properties and electrochemical corrosion properties, in which composite structure with featureless amorphous… read more here.
Keywords: metallic glass; matrix; corrosion properties; corrosion ... See more keywords
Microstructure, mechanical and corrosion properties of Mg-4Al-2Sn-xY-0.4Mn alloys
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.08.171
Abstract: Abstract The effects of Y addition (0, 0.5 and 1.0 wt. %) on the microstructure, mechanical properties and corrosion behavior of Mg-4Al-2Sn-0.4Mn alloy have been investigated. The results indicate that the addition of Y leads to… read more here.
Keywords: corrosion properties; microstructure mechanical; mechanical corrosion; 4al 2sn ... See more keywords
Improved mechanical and corrosion properties of CrMnFeCoNi high entropy alloy with cold rolling and post deformation annealing process
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.161416
Abstract: Abstract The effects of cold rolling and post deformation annealing (CR‐PDA) process on the comprehensive mechanical and corrosion properties of CrMnFeCoNi high entropy alloy (HEA) were investigated. The results indicate that the grain size was… read more here.
Keywords: corrosion properties; mechanical corrosion; process; alloy ... See more keywords
Influence of alloying element Zn on the microstructural, mechanical and corrosion properties of binary Mg-Zn alloys after severe plastic deformation
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.10.017
Abstract: Abstract This work presents an analysis of the microstructural, mechanical and corrosion properties of two binary Mg-Zn alloys. Mg-6 wt%Zn and Mg-12 wt%Zn cast alloys were subjected to annealing followed by quenching and processed via… read more here.
Keywords: corrosion properties; microstructural mechanical; initial state; corrosion ... See more keywords
Processing of Ti/(HA+ZrO2) biocomposite and 50% porous hybrid scaffolds with low Young's modulus by powder metallurgy: Comparing of structural, mechanical, and corrosion properties
Sign Up to like & getrecommendations! Published in 2021 at "Materials Today Communications"
DOI: 10.1016/j.mtcomm.2021.102813
Abstract: Abstract Processing of titanium (Ti)-based implants with improved corrosion resistance and Young’s modulus close to that of cortical bone are receiving considerable attention in orthopedic and dental applications. Therefore, Ti matrix, hydroxyapatite (HA) and hydroxyapatite-zirconia… read more here.
Keywords: zro2; powder metallurgy; young modulus; metallurgy ... See more keywords
Structural, mechanical and corrosion properties of CNT-304 stainless steel nanocomposites
Sign Up to like & getrecommendations! Published in 2019 at "Progress in Natural Science: Materials International"
DOI: 10.1016/j.pnsc.2019.09.007
Abstract: Abstract In this work, a systematic investigation was performed on the structural, mechanical and corrosion properties of CNT incorporated 304 stainless steel. Various concentrations of CNT from 0.5 to 4 wt% were incorporated into the 304… read more here.
Keywords: 304 stainless; steel; stainless steel; corrosion ... See more keywords
Development of Mechanical, Corrosion Resistance, and Antibacterial Properties of Steels
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14247698
Abstract: The total cost and environmental consequences of corrosion problems have become a major challenge to engineers [...]. read more here.
Keywords: corrosion resistance; development mechanical; antibacterial properties; corrosion ... See more keywords
Enhanced Mechanical and Corrosion Properties via Annealing Treatment on the Hot-Rolled Ti-Zr-Mo Alloy
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16072597
Abstract: In this work, the Ti-20Zr-15Mo alloy in its hot-rolled state was annealed in different phase zones, and the effects of the annealing treatment on the phase composition, organization, mechanical and corrosion resistance properties of the… read more here.
Keywords: mechanical corrosion; annealing treatment; corrosion; hot rolled ... See more keywords