Effects of Dy Addition on the Mechanical and Degradation Properties of Mg–2Zn–0.5Zr Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901360
Abstract: As candidates for biomaterials, magnesium and its alloys have promising properties such as biodegradability and biocompatibility. However, their poor mechanical properties and rapid degradation rate limit clinical application; therefore, solving these issues is essential for… read more here.
Keywords: mechanical degradation; microscopy; 2zn 5zr; degradation ... See more keywords
Understanding the Insight Mechanism of Chemical-Mechanical Degradation of Layered Co-Free Ni-Rich Cathode Materials: A Review.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202302208
Abstract: Layered Cobalt (Co)-free Nickel (Ni)-rich cathode materials have attracted much attention due to their high energy density and low cost. Still, their further development is hampered by material instability caused by the chemical/mechanical degradation of… read more here.
Keywords: mechanical degradation; rich cathode; free rich; cathode materials ... See more keywords
Mechanical degradation of electrode materials within single particle model in Li-ion batteries for electric vehicles
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mathematical Chemistry"
DOI: 10.1007/s10910-017-0770-8
Abstract: Mechanical degradation of electrode materials, in the form of particle cracking and fragmentation, disintegration, fracturing, and loss in contact between current collectors and the active electrode materials, can affect or deteriorate the performance of Li-ion… read more here.
Keywords: mechanical degradation; degradation electrode; particle; electrode materials ... See more keywords
On the Assessment of Mechanical Degradation of Grease Using Entropy Generation Rate
Sign Up to like & getrecommendations! Published in 2019 at "Tribology Letters"
DOI: 10.1007/s11249-019-1165-8
Abstract: A methodology for continuous monitoring of grease degradation subjected to mechanical shearing is proposed. It is hypothesized that the mechanical degradation of grease is akin to the running-in process in a tribo-pair with both transient… read more here.
Keywords: degradation; grease; degradation grease; entropy generation ... See more keywords
Corrosion and Mechanical Degradation of Ni-Ti Superelastic Alloy in Neutral Fluoride Solution
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3513-5
Abstract: The corrosion behavior and mechanical degradation of Ni-Ti superelastic alloy in neutral fluoride solution were investigated with a focus on the effect of temperature during immersion. Corrosion was accelerated by increasing the temperature, and mass… read more here.
Keywords: alloy neutral; mechanical degradation; corrosion; solution ... See more keywords
Gyratory abrasion with 2D image analysis test method for evaluation of mechanical degradation and changes in morphology and shear strength of compacted granular materials
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.07.013
Abstract: Abstract Mechanical degradation of granular materials can significantly influence the performance and durability of pavement systems. The commonly used Los Angeles (LA) abrasion test does not test the entire gradation of the material, nor simulate… read more here.
Keywords: abrasion image; granular materials; mechanical degradation; gyratory abrasion ... See more keywords
Mechanical degradation of Fe-C-X steels by acidic stress-corrosion cracking
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.108509
Abstract: Abstract This work evaluates the mechanical degradation of Fe-C-X (X = Cr/Mo/V) steels due to stress-corrosion cracking (SCC) in acidic aqueous environment. Tensile testing of as-quenched and quenched-and-tempered Fe-C-X steels in corrosive environment shows a… read more here.
Keywords: corrosion cracking; mechanical degradation; stress corrosion; degradation steels ... See more keywords
Unveiling mechanical degradation for a monolithic electrochromic device: Glass/ITO/WO3/LiClO4 (PEO)/TiO2/ITO/glass
Sign Up to like & getrecommendations! Published in 2020 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2019.135182
Abstract: Abstract Owing to the accumulation of trapped ions in host structures, electrochromic devices (ECDs) suffer from diminished optical modulation and reduced device efficiency under long-term charge insertions and extractions. The accumulation of trapped ions also… read more here.
Keywords: degradation; ito; glass; mechanical degradation ... See more keywords
4D in situ visualization of mechanical degradation evolution in reinforced fuel cell membranes
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2020.02.013
Abstract: Abstract Composite ionomer membranes with ePTFE reinforcement have been developed to improve operational durability of polymer electrolyte fuel cells by creating a more mechanically robust membrane electrode assembly. The present objective is to determine the… read more here.
Keywords: degradation; fuel cell; mechanical degradation; membrane ... See more keywords
Study of mechanical degradation of sulfonated poly (ether ether ketone) membrane using ex-situ hygrothermal cycles for polymer electrolyte fuel cell application
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Power Sources"
DOI: 10.1016/j.jpowsour.2018.08.067
Abstract: Abstract In this study, an ex-situ method is used to investigate the mechanical degradation of sulfonated poly (ether ether ketone) membranes. The mechanical degradation is carried out by hygrothermal cycles test in different cycles as… read more here.
Keywords: degradation; microscopy; degradation sulfonated; mechanical degradation ... See more keywords
Mechanical and degradation behavior of three Fe-Mn-C alloys for potential biomedical applications
Sign Up to like & getrecommendations! Published in 2021 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2021.102250
Abstract: Abstract Three new Fe-Mn-C alloys were cast, hot rolled and characterized as candidate materials for the fabrication of bioresorbable implants. In particular, the effect of different Mn and C contents on phases formation, mechanical properties… read more here.
Keywords: three alloys; behavior three; degradation behavior; alloys potential ... See more keywords