LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "mechanical properties" as a keyword



Photo by tomspentys from unsplash

Designable Mechanical Properties of 3D Printing Composites with Multiple Filaments by Different Infill Percentages and Structures

Sign Up to like & get
recommendations! Published in 2019 at "Advanced Engineering Materials"

DOI: 10.1002/adem.201900508

Abstract: The current study reports the mechanical properties of 3D printing using multiple composite filaments, infill percentages, and printed structures. Results show that graphene‐contained polylactic acid (G‐PLA) displays the highest bending strength, of 119.50 MPa, improving by… read more here.

Keywords: designable mechanical; printing composites; properties printing; infill percentages ... See more keywords
Photo from wikipedia

Evaluating the Effect of Hot‐Rolling Reduction on the Mechanical Properties of In Situ Formed Aluminum–Magnesium–Silicon (Al‐Mg2Si) Composites

Sign Up to like & get
recommendations! Published in 2019 at "Advanced Engineering Materials"

DOI: 10.1002/adem.201900609

Abstract: The effects of hot rolling on the microstructure and mechanical properties of as‐cast Al‐15Mg2Si, Al‐20Mg2Si, and modified Al‐15Mg2Si in situ composites are studied. During rolling, the primary and eutectic Mg2Si particles undergo mechanical fragmentation and… read more here.

Keywords: mg2si; evaluating effect; ductility; hot rolling ... See more keywords
Photo from wikipedia

Characterizing Microstructural and Mechanical Properties of Al–Zn Alloys Processed by High‐Pressure Torsion

Sign Up to like & get
recommendations! Published in 2019 at "Advanced Engineering Materials"

DOI: 10.1002/adem.201900672

Abstract: Herein, the characterization of microstructures and mechanical properties of Al–Zn alloys ultrafine-grained (UFG) by using high pressure torsion (HPT) is surveyed. Emphasis is placed on the decomposition of the solid solution structures due to the… read more here.

Keywords: pressure torsion; properties alloys; mechanical properties; high pressure ... See more keywords
Photo from wikipedia

Exploiting Functionally Graded Elastomeric Materials to Program Collapse and Mechanical Properties

Sign Up to like & get
recommendations! Published in 2019 at "Advanced Engineering Materials"

DOI: 10.1002/adem.201900807

Abstract: The development of materials with periodic microstructures provides the means to tune mechanical properties via prescribed collapse mechanisms. As investigations give attention to tunable unit cell designs, questions arise regarding strategic ways to exploit built-up… read more here.

Keywords: collapse; exploiting functionally; functionally graded; elastomeric materials ... See more keywords
Photo by martindorsch from unsplash

Microstructure and Mechanical Properties of the As‐Cast AlLiCuMgZr Alloy with High Li Content and Different Cu/Mg Ratios

Sign Up to like & get
recommendations! Published in 2020 at "Advanced Engineering Materials"

DOI: 10.1002/adem.201901570

Abstract: The microstructures and mechanical properties of as‐cast AlLiCuMgZr alloys with high Li content and different Cu/Mg ratios are investigated. The results show that the tensile strength increases and the elongation almost keeps unchanged, with the… read more here.

Keywords: phase; high content; content different; properties cast ... See more keywords
Photo from wikipedia

Mechanical Properties Improvement in Highly and Aligned Dispersed Graphene Oxide/Bismaleimide Nanocomposites based on Graphene Oxide Sponge

Sign Up to like & get
recommendations! Published in 2020 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202000231

Abstract: Graphene oxide (GO) as an excellent nanofiller is widely used to improve the mechanical properties of the resin matrix. The dispersion and distribution of GO sheets in the resin matrix have a strong impact on… read more here.

Keywords: graphene oxide; method; highly aligned; dispersion ... See more keywords
Photo from wikipedia

Mechanical Properties of FeCr‐Based Composite Materials Elaborated by Liquid Metal Dealloying towards Bioapplication

Sign Up to like & get
recommendations! Published in 2020 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202000381

Abstract: Liquid metal dealloying (LMD) is a new technology to create porous materials. From a (FeCr)x‐Ni1–x precursor, it is possible to get a bicontinuous structure of FeCr and Mg: a metal–metal composite. An etching step removes… read more here.

Keywords: phase; polymer; liquid metal; metal dealloying ... See more keywords
Photo from wikipedia

Microstructural Evolution and Mechanical Properties of As‐Cast and As‐Extruded Mg–14Li Alloy with Different Zn/Y and Zn/Gd Addition

Sign Up to like & get
recommendations! Published in 2020 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202000480

Abstract: Herein, the effects of Zn/Y and Zn/Gd addition on microstructural evolution and mechanical properties of the superlight Mg–14Li‐based alloy are investigated. The results show that Mg–14Li‐based alloys are characterized by predominantly single β‐Li phase. Zn/Y… read more here.

Keywords: evolution mechanical; addition; microstructural evolution; mechanical properties ... See more keywords
Photo from wikipedia

Preparation and Mechanical Properties of Copper Matrix Composites Reinforced by Carbon Nanotubes and Al2O3

Sign Up to like & get
recommendations! Published in 2021 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202001490

Abstract: CNTs/Cu‐Al2O3 composites are successfully prepared by internal oxidation, chemical vapor deposition and spark plasma sintering (SPS) method. The influence of Al content (0.12 and 0.6 wt%) on the morphology of grown carbon nanotubes and the mechanical… read more here.

Keywords: carbon nanotubes; matrix composites; mechanical properties; cnts al2o3 ... See more keywords
Photo by anthonytran from unsplash

Improving Mechanical Properties of GH4169 Alloys by Reversing the Deformation and Aging Sequence

Sign Up to like & get
recommendations! Published in 2021 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202100386

Abstract: Herein, the microstructure evolution and mechanical properties of GH4169 alloys obtained by solution treatment–deformation–two‐stage aging (SDA) and solution treatment–two‐stage aging–deformation (SAD) are investigated. The results show that the density of average geometrically necessary dislocations and… read more here.

Keywords: gh4169 alloys; sad sample; properties gh4169; mechanical properties ... See more keywords
Photo from wikipedia

A New Approach for Manufacturing Stochastic Pure Magnesium Foam by Laser Powder Bed Fusion: Fabrication, Geometrical Characteristics, and Compressive Mechanical Properties

Sign Up to like & get
recommendations! Published in 2021 at "Advanced Engineering Materials"

DOI: 10.1002/adem.202100483

Abstract: Herein, stochastic pure magnesium foam using laser powder bed fusion (LPBF) is fabricated and its geometric characteristics and mechanical properties are investigated. As volumetric energy density (VED) increased from 20 to 40 J mm−3 by controlling process… read more here.

Keywords: foam; magnesium foam; stochastic pure; pure magnesium ... See more keywords