Mechanical and Wear Behaviour of Hot-Pressed 304 stainless Steel Matrix Composites Containing TiB2 Particles
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01588-1
Abstract: AbstractIn the present article, mechanical and wear behaviour of hot-pressed 304 stainless steel matrix composites containing 2 and 4 vol% TiB2 particles was investigated. A density of over 92% was achieved at optimum hot-pressing temperature and… read more here.
Keywords: steel matrix; tib2 particles; mechanical wear; matrix composites ... See more keywords
Nanostructured TaC film deposited by reactive magnetron sputtering: Influence of gas concentration on structural, mechanical, wear and corrosion properties
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.01.055
Abstract: Abstract TaC coatings were applied on the surface of the AISI316L stainless steel by reactive magnetron sputtering, and the effects of CH 4 concentrations ( C CH 4 = 0 , 5 , 10 ,… read more here.
Keywords: reactive magnetron; wear corrosion; structural mechanical; mechanical wear ... See more keywords
Mechanical and wear properties of Mo5Si3–Mo3Si–Al2O3 composites
Sign Up to like & getrecommendations! Published in 2017 at "Intermetallics"
DOI: 10.1016/j.intermet.2017.01.013
Abstract: Abstract Mo 5 Si 3 and Mo 5 Si 3 –Mo 3 Si–Al 2 O 3 composite were synthesized use MoO 3 , Mo, Si and Al as raw materials by mechanically induced self propagating… read more here.
Keywords: mo5si3 mo3si; mechanical wear; mo3si al2o3; al2o3 composites ... See more keywords
Mechanical and wear behaviour of AZ91D magnesium matrix hybrid composite reinforced with boron carbide and graphite
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Magnesium and Alloys"
DOI: 10.1016/j.jma.2016.12.004
Abstract: Abstract In this experimental study, magnesium (AZ91D) based boron carbide (B4C) and graphite (Gr) particle reinforced hybrid composite materials were manufactured by stir casting. The tribological and mechanical properties of these composite materials were investigated.… read more here.
Keywords: boron carbide; hybrid composite; magnesium; mechanical wear ... See more keywords
Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2020.09.010
Abstract: Abstract The necessity for high performance and low-cost materials caused the researchers worldwide to switch the focus from monolithic to composite materials. In the recent pasts, a significant effort has been made in this direction… read more here.
Keywords: matrix composites; aluminum; mechanical wear; wear ... See more keywords
Microstructure, mechanical and wear properties of core-shell structural particle reinforced Ti-O alloys
Sign Up to like & getrecommendations! Published in 2017 at "Vacuum"
DOI: 10.1016/j.vacuum.2017.02.006
Abstract: Abstract To improve the mechanical and wear performances of the Ti alloy, core-shell particles of different volume fractions were introduced in Ti matrix by means of spark plasma sintering (SPS). Optical microstructure observations show that… read more here.
Keywords: shell; mechanical wear; core shell; microstructure mechanical ... See more keywords
Microstructure, mechanical and wear properties of Cu–ZrO2 nanocomposites
Sign Up to like & getrecommendations! Published in 2017 at "Materials Science and Technology"
DOI: 10.1080/02670836.2017.1353668
Abstract: ABSTRACT Cu–ZrO2 nanocomposites were produced by the thermochemical process followed by powder metallurgy technique. Microstructure development during fabrication process was investigated by X-ray diffraction, field emission scanning electron microscope and transmission electron microscope. The results… read more here.
Keywords: properties zro2; zro2 nanocomposites; microstructure mechanical; mechanical wear ... See more keywords
Evaluation of Mechanical and Wear Performances of Natural Fiber Reinforced Epoxy Composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Natural Fibers"
DOI: 10.1080/15440478.2020.1807441
Abstract: The possible usage of natural fiber reinforced composites (NFC) for various industrial applications is being explored. In the present work, mechanical and wear behavior of three different NFCs were... read more here.
Keywords: natural fiber; mechanical wear; fiber reinforced; evaluation mechanical ... See more keywords
Mechanical and wear performance of A356/Al2O3 aluminum nanocomposites by considering the mechanical milling time and microstructural properties
Sign Up to like & getrecommendations! Published in 2023 at "Industrial Lubrication and Tribology"
DOI: 10.1108/ilt-02-2023-0031
Abstract: Purpose The paper aims to examine the mechanical and wear performance of A356/Al2O3 (alumina) nanocomposites. The correlation between wear performance and the microstructural properties that result from various mechanical milling periods was investigated. Design/methodology/approach The… read more here.
Keywords: mechanical wear; mechanical milling; microstructural properties; wear performance ... See more keywords
Investigation on microstructures, mechanical and wear properties of Al 390/ZrO2 composite materials fabricated by P/M method
Sign Up to like & getrecommendations! Published in 2020 at "Multidiscipline Modeling in Materials and Structures"
DOI: 10.1108/mmms-10-2019-0180
Abstract: PurposeAluminium is the most proficiently and commonly used metal due to its desirable physical, chemical and mechanical properties. When Aluminium reinforced with hard ceramic particles, shows increased strength and good corrosion resistant and wear resistant… read more here.
Keywords: microstructures mechanical; zro2; investigation microstructures; wear ... See more keywords
Microstructure, mechanical and wear characteristics of CeO2-Mg metal matrix composites
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering"
DOI: 10.1177/09544089221139592
Abstract: In this study, an attempt is made in producing composite materials by reinforcing cerium oxide with magnesium matrix. Very limited research has been carried out by using cerium oxide as a reinforcement through powder metallurgy… read more here.
Keywords: mechanical wear; matrix; microstructure mechanical; cerium oxide ... See more keywords