Toughening of Bio-Based PA 6.19 by Copolymerization with PA 6.6 - Synthesis and Production of Melt-Spun Monofilaments and Knitted Fabrics.
Sign Up to like & getrecommendations! Published in 2023 at "Macromolecular rapid communications"
DOI: 10.1002/marc.202300256
Abstract: This work reports on the synthesis of statistical copolymers of bio-based PA 6.19 and PA 6.6 together with the production of melt-spun monofilaments for the production of sustainable textile fibers. The plant oil-based 1.19-nonadecanedioic acid was synthesized… read more here.
Keywords: melt spun; spun monofilaments; bio based; production melt ... See more keywords
Copper effects in mechanical, thermal and electrical properties of rapidly solidified eutectic Sn–Ag alloy
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-8906-6
Abstract: The Sn–3.5 wt%Ag alloy considered as a good alternative to Pb–Sn alloys. This study aims to investigate the effects of Cu or Sb additions by 3 or 5 wt% to melt-spun Sn–3.5%Ag alloy. Ternary melt-spun Sn–Ag–Cu and… read more here.
Keywords: mechanical thermal; alloy; thermal electrical; melt spun ... See more keywords
Melt-spun modified poly (styrene-co-butyl acrylate) fiber as a carrier to support manganese oxide and its application in dye wastewater decolorization
Sign Up to like & getrecommendations! Published in 2020 at "Environmental Science and Pollution Research"
DOI: 10.1007/s11356-020-09105-4
Abstract: Polymer fiber, a kind of versatile material, has been widely used in many fields. However, emerging applications still urge us to develop some new kinds of fibers. Advanced oxidation processes (AOPs) have created a promising… read more here.
Keywords: manganese oxide; melt spun; fiber; wastewater ... See more keywords
Melt-Spun SiGe Nano-Alloys: Microstructural Engineering Towards High Thermoelectric Efficiency
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-020-08560-6
Abstract: Abstract Silicon-germanium (SiGe) alloys are prominent high-temperature thermoelectric (TE) materials used as a powering source for deep space applications. In this work, we employed rapid cooling rates for solidification by melt-spinning and rapid heating rates… read more here.
Keywords: temperature; melt spun; nano alloys; sige nano ... See more keywords
Elastic Moduli of Nanoglasses and Melt-Spun Metallic Glasses by Ultrasonic Time-of-Flight Measurements
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01969-x
Abstract: The elastic moduli of the metallic nanoglasses Fe 86 Sc 14, Fe 90 Sc 10 , Cu 58 Zr 42 , and Cu 60 Zr 40 were determined by measuring their longitudinal and shear wave… read more here.
Keywords: spun metallic; melt spun; moduli nanoglasses; elastic moduli ... See more keywords
The electrochemical performance of melt-spun C14-Laves type Ti Zr-based alloy
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2019.02.093
Abstract: Abstract The main objective of the present work is to study the effect of rapid solidification on the electrochemical performance of Zr-based Laves type alloy with a nominal composition Ti12Zr21.5V10Cr7.5Mn8.1Co8Ni32.2Al0.4Sn0.3. The samples were prepared from… read more here.
Keywords: electrochemical performance; performance; wheel rotation; laves type ... See more keywords
The formation of quasicrystals in Al-Cu-Fe-(M=Cr, Ni) melt-spun ribbons
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.09.139
Abstract: Abstract The influence of Cr and Ni additions in rapidly-solidified Al-Cu-Fe alloys was investigated. Four compositions, namely, Al 64 Cu 20 Fe 13 Ni 3 , Al 63 Cu 18 Fe 10 Ni 9 ,… read more here.
Keywords: spun ribbons; quasicrystals melt; phase; methodology ... See more keywords
An improvement of self-discharge properties of Ce2Ni7-type La0.65Ce0.1Mg0.25Ni3Co0.5 hydrogen storage alloy produced by the melt-spun processing
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.160183
Abstract: Abstract The microstructure and self-discharge properties of Ce2Ni7-type La0.65Ce0.1Mg0.25Ni3Co0.5 hydrogen storage alloy produced by conventional casting, annealing and melt-spinning methods are studied. A melt-spun processing is greatly effective for improving the self-discharge properties by changing… read more here.
Keywords: self discharge; discharge; melt spun; alloy ... See more keywords
Structure and magnetic properties of Heusler alloy Co 2 RuSi melt-spun ribbons
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2017.03.077
Abstract: Abstract Heusler alloy Co 2 RuSi has been synthesized by melt-spinning technology successfully. Co 2 RuSi bulk sample after annealing is composed of an HCP Co-rich phase and a BCC Ru-Si phase, but melt-spinning can… read more here.
Keywords: phase; melt spun; rusi; magnetic properties ... See more keywords
Magnetic properties and microstructure of melt-spun Ce 17 Fe 78-x B 6 Hf x (x = 0-1.0) alloys
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2017.08.068
Abstract: Abstract Ce 17 Fe 78−x B 6 Hf x (x = 0–1.0) alloys were fabricated by a melt-spinning technique in order to study their magnetic properties and microstructure. Magnetic investigations of Ce 17 Fe 78−x B 6… read more here.
Keywords: microstructure melt; spun alloys; melt spun; magnetic properties ... See more keywords
Magnetic and lattice entropy change across martensite transition of Ni-Mn-Sn melt spun ribbons: Key factors in magnetic refrigeration
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2018.07.048
Abstract: Abstract Ni 45 Mn 44 Sn 11 melt spun ribbons have been prepared by melt spinning technique. A single austenite L2 1 phase with lattice constant 5.945 A is confirmed at room temperature. The first order… read more here.
Keywords: phase; martensite transition; transition; melt spun ... See more keywords