Efficacy of using slurry of metal-coated microencapsulated PCM for cooling in a micro-channel heat exchanger
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2017.05.001
Abstract: Abstract This paper provides a method of heat transfer enhancement using microencapsulated phase change material (MPCM) slurries, utilizing the latent heat of PCM during melting. The values of heat transfer coefficient obtained for water are… read more here.
Keywords: heat; pcm; heat transfer; metal coated ... See more keywords
Metal-coated hybrid meso-lattice composites and their mechanical characterizations
Sign Up to like & getrecommendations! Published in 2018 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.07.074
Abstract: Abstract Developing cellular materials, especially ordered lattice structures, would allow the exploitation of structural advantages and enhance the mechanical performances. However, most lattice structures only consist of a single component material, while less investigations are… read more here.
Keywords: meso lattice; metal coated; coated hybrid; lattice composites ... See more keywords
Electrically tunable Brillouin fiber laser based on a metal-coated single-mode optical fiber
Sign Up to like & getrecommendations! Published in 2017 at "Results in physics"
DOI: 10.1016/j.rinp.2017.01.034
Abstract: Abstract We explore tunability of the Brillouin fiber laser employing Joule heating. For this purpose, 10-m-length of a metal-coated single-mode optical cavity fiber has been directly included into an electrical circuit, like a conductor wire.… read more here.
Keywords: laser; mode; metal coated; brillouin fiber ... See more keywords
Temperature sensing characteristics of metal coated FBG during dynamic cooling process
Sign Up to like & getrecommendations! Published in 2018 at "Optical Fiber Technology"
DOI: 10.1016/j.yofte.2018.08.013
Abstract: Abstract Temperature sensitivity of bare Fiber Bragg Grating (FBG) is quite low when used as sensor in the cryogenic environments, which is due to the decrease of thermal expansion coefficient and thermo-optic coefficient of silica… read more here.
Keywords: cooling process; temperature; coated fbg; metal coated ... See more keywords
Investigation of TE-polarized photonic band gap properties in matallodielectric photonic crystals composed of metal coated dielectric cylinders
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Modern Optics"
DOI: 10.1080/09500340.2017.1380855
Abstract: Using the Dirichlet-to-Neumann map method and generalization of this method, we have been able to calculate the photonic band structure of two-dimensional (2D) metallodielectric photonic crystals composed of metal-coated circular dielectric rods. The rods are… read more here.
Keywords: crystals composed; metal coated; composed metal; photonic band ... See more keywords
Chemical vapor deposition of hexagonal boron nitride on metal-coated wafers and transfer-free fabrication of resistive switching devices
Sign Up to like & getrecommendations! Published in 2019 at "2D Materials"
DOI: 10.1088/2053-1583/ab1783
Abstract: Due to their outstanding electronic and physical properties, two-dimensional (2D) materials have attracted much interest for the fabrication of solid-state microelectronic devices. Among all methods to synthesize 2D materials, chemical vapor deposition (CVD) is the… read more here.
Keywords: hexagonal boron; metal; vapor deposition; coated wafers ... See more keywords
Structural color modulation by laser post-processing on metal-coated colloidal crystals.
Sign Up to like & getrecommendations! Published in 2023 at "Applied optics"
DOI: 10.1364/ao.468281
Abstract: A method to use a pulsed solid-state laser to create structural color modulation on metal-coated colloidal crystal surfaces by changing the scanning speed has been proposed. Vivid colors as cyan, orange, yellow, and magenta are… read more here.
Keywords: colloidal crystals; laser; metal coated; color modulation ... See more keywords
Improving Temperature-Sensing Performance of Photonic Crystal Fiber via External Metal-Coated Trapezoidal-Shaped Surface
Sign Up to like & getrecommendations! Published in 2023 at "Crystals"
DOI: 10.3390/cryst13050813
Abstract: This article describes a photonic crystal fiber (PCF) temperature sensor that utilizes a flat, metal-coated trapezoidal surface. The PCF is made up of two layers of elliptical air holes and a polished trapezoidal surface that… read more here.
Keywords: coated trapezoidal; photonic crystal; surface; temperature ... See more keywords
Formation Mechanism and Cohesive Energy Analysis of Metal-Coated Graphene Nanocomposites Using In-Situ Co-Reduction Method
Sign Up to like & getrecommendations! Published in 2018 at "Materials"
DOI: 10.3390/ma11112071
Abstract: Nanocomposite powders based on metal-coated graphene were synthesized using an in-situ co-reduction method in order to improve wettability and interfacial bonding between graphene and metal. Graphene oxide (GO) of 2~3 atomic layers was synthesized using… read more here.
Keywords: reduction; metal coated; graphene; method ... See more keywords
Obtainment and Characterization of Metal-Coated Polyethylene Granules as a Basis for the Development of Heat Storage Systems
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14010218
Abstract: The research studied the feasibility of using copper-coated polyethylene granules as a basis for creating efficient heat storage systems. A technology for imparting catalytic properties to a polymer surface by the joint processing of polymer… read more here.
Keywords: coated polyethylene; heat storage; polyethylene granules; metal ... See more keywords