LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "mg17al12" as a keyword



Photo from wikipedia

Dynamic and Static Aging Precipitation of β-Mg17Al12 in the AZ80 Magnesium Alloy During Multi-directional Forging and Subsequent Aging

Sign Up to like & get
recommendations! Published in 2017 at "Acta Metallurgica Sinica (English Letters)"

DOI: 10.1007/s40195-017-0575-6

Abstract: Dynamic and static aging precipitation of Mg17Al12 phases in AZ80 magnesium alloy was studied by multi-directional forging (MDF) with decreasing temperatures from 410 to 300 °C and subsequent aging process. The results show that the morphology… read more here.

Keywords: mg17al12; static aging; precipitation mg17al12; mg17al12 phases ... See more keywords
Photo by alexanderfastovets from unsplash

Sequential precipitation behavior of Mg17Al12 and Mg2Sn in Mg-8Al-2Sn-1Zn alloys

Sign Up to like & get
recommendations! Published in 2018 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2018.03.380

Abstract: Abstract The precipitation behavior of Mg-8Al-2Sn-1Zn (ATZ821) alloy was investigated. Sn addition to the AZ81 alloy greatly influenced the initial precipitation behavior in the following two aspects: (i) the segregation of Sn solutes at the… read more here.

Keywords: precipitation behavior; precipitation; mg17al12; 2sn 1zn ... See more keywords
Photo from wikipedia

Synergistic effect of broken Mg2Si and sub-micron Mg17Al12 induced by EX- ECAP on the strength and ductility of deformed Mg-4Al-1Si-1Gd alloy

Sign Up to like & get
recommendations! Published in 2020 at "Journal of materials research and technology"

DOI: 10.1016/j.jmrt.2020.02.049

Abstract: Abstract In order to obtain higher synthetically mechanical properties, Mg-4Al-1Si-1Gd alloy was deformed by the combination of hot extrusion and equal channel angular pressing (ECAP). The results show that combined deformation process can further promote… read more here.

Keywords: 1si 1gd; alloy; 1gd alloy; mg17al12 ... See more keywords
Photo from wikipedia

Strength and corrosion resistance of Al-alloying layer on AZ31B magnesium alloy fabricated in situ by reactive friction stir processing

Sign Up to like & get
recommendations! Published in 2021 at "Materials Characterization"

DOI: 10.1016/j.matchar.2021.111024

Abstract: Abstract In this study, reactive friction stir processing (RFSP) was applied for AZ31B Mg alloy to improve their inferior strength and corrosion resistance. A high-Al alloying layer was successfully fabricated on rolled AZ31B plate surface… read more here.

Keywords: corrosion resistance; mg17al12; strength; layer ... See more keywords
Photo by des0519 from unsplash

Microscopic Analysis of Layers Containing Mg2Si and Mg17Al12 Phases Fabricated on AZ91 Through Thermochemical Treatment

Sign Up to like & get
recommendations! Published in 2023 at "Archives of Foundry Engineering"

DOI: 10.24425/afe.2019.129621

Abstract: The thermochemical treatment applied to improve the surface properties of AZ91 consisted in heating the material in contact with AlSi10Mg powder at 445 C for 30 min. During heat treatment process the powder was held… read more here.

Keywords: phase; mg2si; mg17al12; mg2si phase ... See more keywords