Fabrication of microelectrode with large aspect ratio and precision machining of micro-hole array by micro-EDM
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2019.01.009
Abstract: Abstract Micro electrical discharge machining (micro-EDM) exhibits good processing capability to miniature structures such as micro-holes, micro-dimples, micro-channels and so on. In present study, the precision micro-EDM of micro-hole array with diameter less than 50 μm… read more here.
Keywords: array; micro edm; micro hole; hole array ... See more keywords
Effects of the properties of workpiece, electrode and dielectric fluid in micro-EDM drilling process
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.10.117
Abstract: Abstract In the last years, the miniaturization of the components took place in many industrial sectors such as automotive, aerospace, biomedical. Significant industrial efforts were made to support this new manufacturing trend in order to… read more here.
Keywords: edm drilling; process; dielectric fluid; micro edm ... See more keywords
A Novel Methodology for Spark Gap Monitoring in Micro-EDM Using Optical Fiber Bragg Grating
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Instrumentation and Measurement"
DOI: 10.1109/tim.2019.2941291
Abstract: Micro-electric discharge machining (micro-EDM) is the most considerable micro-manufacturing process used to engineer miniaturized features on any high temperature resistive hard material. The machining parameters of micro-EDM are very stochastic in nature. The spark gap… read more here.
Keywords: micro edm; gap; methodology; spark gap ... See more keywords
Study of discharge characteristics and multi objective optimisation of machining parameters in ultrasonic vibration assisted micro electrical discharge machining
Sign Up to like & getrecommendations! Published in 2023 at "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science"
DOI: 10.1177/09544062231168775
Abstract: Micro-EDM is a non-traditional manufacturing technique that uses the heat energy of the plasma to remove material. When there is a sufficient electric potential between two electrodes, the dielectric in between becomes ionised, resulting in… read more here.
Keywords: energy; plasma; discharge; ultrasonic vibration ... See more keywords
Multi-functional Inconel 625 micro-machining and process optimization using ANFIS
Sign Up to like & getrecommendations! Published in 2024 at "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering"
DOI: 10.1177/09544089241249843
Abstract: The primary objective of this study is to develop an adaptive neuro-fuzzy inference-based system (ANFIS) that assesses the ideal parameters and impact of the micro-electro-discharge machining (Micro-EDM) technique on surface roughness (SR). In this work… read more here.
Keywords: process; micro edm; multi functional; inconel 625 ... See more keywords
Simultaneous parametric optimization of micro-EDM drilling of brass C360 using Taguchi based grey relation analysis
Sign Up to like & getrecommendations! Published in 2021 at "Engineering review"
DOI: 10.30765/er.1377
Abstract: Micro-EDM (Electro Discharge Machining) is widely used for precision manufacturing and drilling micro-holes in materials used in fuel nozzles, micro sensors and robots, surgical instruments, turbines etc. Present paper deals with drilling common C360 brass… read more here.
Keywords: grey relation; micro edm; process; micro ... See more keywords
An Experimental Study on Processing TC4 with Nano Particle Surfactant Mixed Micro EDM
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14206074
Abstract: Micro electrical discharge machining (micro EDM) is able to remove conductive material by non-contact instantaneous high temperature, which is more suitable for machining titanium and its alloys compared with traditional machining methods. To further improve… read more here.
Keywords: nano particle; micro edm; micro; particle surfactant ... See more keywords
Study on Forming Mechanism of the Recast Layer on the Workpiece Surface during Micro EDM
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17051073
Abstract: In comparison to conventional EDM, micro EDM distinguishes itself through its brief discharge duration, narrow discharge channel radius, and concentrated energy density. However, there remains a paucity of comprehensive research on the surface formation characteristics… read more here.
Keywords: edm; micro edm; surface; recast layer ... See more keywords
Investigating Technological Parameters and TiN-Coated Electrodes for Enhanced Efficiency in Ti-6Al-4V Micro-EDM Machining
Sign Up to like & getrecommendations! Published in 2024 at "Metals"
DOI: 10.3390/met14020162
Abstract: Micro-electrical discharge machining (micro-EDM) stands out as a transformative methodology, offering substantial progress in both technical and economic efficiency through the integration of coated electrodes. This study meticulously analyzes various technological parameters in micro-EDM, focusing… read more here.
Keywords: methodology; micro edm; micro; technological parameters ... See more keywords
Process Fingerprint in Micro-EDM Drilling
Sign Up to like & getrecommendations! Published in 2019 at "Micromachines"
DOI: 10.3390/mi10040240
Abstract: The micro electrical discharge machining (micro-EDM) process is extensively used in aerospace, automotive, and biomedical industries for drilling small holes in difficult-to-machine materials. However, due to the complexity of the electrical discharge phenomena, optimization of… read more here.
Keywords: edm drilling; process; process fingerprint; micro edm ... See more keywords
Desktop Micro-EDM System for High-Aspect Ratio Micro-Hole Drilling in Tungsten Cemented Carbide by Cut-Side Micro-Tool
Sign Up to like & getrecommendations! Published in 2020 at "Micromachines"
DOI: 10.3390/mi11070675
Abstract: Tungsten cemented carbide (WC-Co) is a widely applied material in micro-hole drilling, such as in suction nozzles, injection nozzles, and wire drawing dies, owing to its high wear resistance and hardness. Since the development of… read more here.
Keywords: micro edm; micro; edm system; micro holes ... See more keywords