Advanced Deep Learning‐Based 3D Microstructural Characterization of Multiphase Metal Matrix Composites
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901197
Abstract: The quantitative analysis of microstructural features is a key to understanding the micromechanical behavior of metal matrix composites (MMCs), which is a premise for their use in practice. Herein, a 3D microstructural characterization of a… read more here.
Keywords: microstructural characterization; advanced deep; deep learning; matrix composites ... See more keywords
Microstructural Characterization and Wear Performance of NiTi–ZrO2 Composites
Sign Up to like & getrecommendations! Published in 2020 at "Metals and Materials International"
DOI: 10.1007/s12540-020-00849-9
Abstract: In this study, NiTi-x wt% monoclinic ZrO2 (x = 0, 5, and 10) samples were fabricated with spark plasma sintering method and the role of zirconia microparticles addition on the microstructure, martensitic transformation, and wear behavior of… read more here.
Keywords: microstructural characterization; zro2; niti zro2; wear performance ... See more keywords
Microstructural Characterization of Equiatomic CrFeNbNiV Alloy
Sign Up to like & getrecommendations! Published in 2018 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-018-1466-x
Abstract: This paper presents the results of an experimental study to investigate the structural and microchemical characteristics of an equiatomic CrFeNbNiV alloy. XRD analysis of CrFeNbNiV alloy, revealed a predominant NbCrNi type HCP Laves phase conjoined… read more here.
Keywords: characterization equiatomic; alloy; microstructural characterization; crfenbniv alloy ... See more keywords
Microstructural characterization and wear properties of silver and gold nanoparticle doped K-Mg-Al-Si-O-F glass-ceramics
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.08.356
Abstract: In ascertaining the effects of silver (Ag) and gold (Au) nanoparticles on crystallization of boro-alumino-silicate system; the K2O-MgO-Al2O3-SiO2-B2O3-F glasses doped with/without 0.2 wt% Ag- and Au- content were melt quenched at 1550 degrees C. Doping… read more here.
Keywords: silver gold; microstructural characterization; glass; glass ceramics ... See more keywords
Hot pressing and microstructural characterization of SiC and TiN added TiB2 ceramics
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.09.258
Abstract: Abstract This investigation aimed to study the individual and synergic impacts of SiC and TiN additives on the sinterability and microstructure of TiB2-based ceramics. The hot-pressing method at 2000 °C was implemented to fabricate the samples.… read more here.
Keywords: pressing microstructural; microstructural characterization; tin; sic tin ... See more keywords
Microstructural characterization of TiB2–SiC–BN ceramics prepared by hot pressing
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.07.080
Abstract: Abstract This research intended to evaluate the discrete and cumulative impacts of hexagonal SiC and BN additives on the microstructural features and consolidation behavior of TiB2-based materials. All specimens were sintered at the same hot-pressing… read more here.
Keywords: hot pressing; sic hbn; tib2; tib2 sic ... See more keywords
Microstructural characterization and thermodynamic analysis of MoZn produced by mechanical alloying
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.10.052
Abstract: Abstract In this work, the microstructural evolution of MoZn during mechanical alloying (MA) was studied. The phases and morphology at each stage of milling were studied by X-ray diffraction, scanning electron microscopy, and high-resolution transmission… read more here.
Keywords: microstructural characterization; microscopy; characterization thermodynamic; mechanical alloying ... See more keywords
Microstructural characterization of an α+β type Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy during recrystallization annealing
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.02.132
Abstract: Abstract An α + β type titanium alloy was subjected to various periods of recrystallization annealing and the resulting microstructural evolution was characterized. The results revealed that the recrystallization rate of the β phase was… read more here.
Keywords: recrystallization; phase; recrystallization annealing; alloy ... See more keywords
Microstructural characterization of Cu-Sn-Zn electrodeposits produced potentiostatically from acid baths based on trisodium nitrilotriacetic
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Electroanalytical Chemistry"
DOI: 10.1016/j.jelechem.2018.07.023
Abstract: Abstract This study characterizes the Cu-Sn-Zn electrodeposits produced potentiostatically from baths containing different concentrations of Cu2+, Sn2+ and Zn2+ ions and 0.60 M trisodium nitrilotriacetic (NTA) at pH 4.99 (higher stability). Ternary electrodeposits were produced onto AISI… read more here.
Keywords: electrodeposits produced; potentiostatically acid; microstructural characterization; trisodium nitrilotriacetic ... See more keywords
Microstructural characterization and mechanical property of GH4169 superalloy joints obtained by linear friction welding
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.06.032
Abstract: Abstract The solid-solution strengthened GH4169 superalloy is joined successfully by linear friction welding (LFW) at various welding parameters in this study. Supported by numerical simulation, the microstructural characterization and mechanical property of the linear friction… read more here.
Keywords: linear friction; friction welding; characterization mechanical; friction ... See more keywords
Radiation tolerance of commercial and advanced alloys for core internals: a comprehensive microstructural characterization
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2018.08.035
Abstract: Abstract Thirteen austenitic stainless steels, nickel-base alloys, and ferritic alloys were irradiated using 2 MeV protons at 360 °C to a damage level of 2.5 displacements per atom (dpa). Comprehensive microstructural characterization was performed for irradiation-induced features,… read more here.
Keywords: irradiation; microstructural characterization; comprehensive microstructural; observed alloys ... See more keywords