Microstructural Modification of Calcium Phosphate–Based Bioceramic Materials by Adding Gelatin
Sign Up to like & getrecommendations! Published in 2025 at "Asia-Pacific Journal of Chemical Engineering"
DOI: 10.1002/apj.70075
Abstract: Calcium phosphate (CaP) bioceramics like hydroxyapatite (HAP) are widely used for hard tissue repair due to their chemical and structural similarities to the mineral phase of bone. In order to improve their properties and expand… read more here.
Keywords: calcium phosphate; gelatin; phosphate based; microstructural modification ... See more keywords
The Assessment of the Microstructural Modification, Corrosion Response, and Tribological Behavior of AA8011 reinforced Nano-ZrB2 for Life Span Enhancement in Automobile Application
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-00382-7
Abstract: The microstructural modification, corrosion response, and tribological performance of AA8011 matrix binary composite produced with the use of Nanoceramic ZrB2 as the particulate discontinuous phase has been examined. ZrB2 added with 5, 10, 15, and… read more here.
Keywords: aa8011; corrosion response; microstructural modification; corrosion ... See more keywords
Microstructural modification of recycled aluminium alloys by high-intensity ultrasonication: Observations from custom Al–2Si–2Mg–1.2Fe–(0.5,1.0)Mn alloys
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.153833
Abstract: Abstract The effect of ultrasonication on the solidification microstructure of recycled Al-alloys is investigated using custom Al–2Si–2Mg–1.2Fe–xMn alloys (x = 0.5 and 1%, in wt.%) through cooling curve measurement, optical and electron microscopy, X-ray diffraction, differential scanning… read more here.
Keywords: 2si 2mg; ultrasonication; nucleation; microstructural modification ... See more keywords
Microstructural modification and mechanical characterization for a laser-induced composite coating during thermal exposure
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.10.091
Abstract: Abstract In this work, a composite coating prepared by laser cladding on a Ni-17Mo-7Cr based superalloy was thermally exposed at 1073 K for 240 h. A detailed electron microscopy examination was performed to characterize the microstructure of… read more here.
Keywords: thermal exposure; microstructural modification; aged coating; coating ... See more keywords
Microstructural modification and ageing behaviour of the Al–17Si–5Cu alloy using a novel approach
Sign Up to like & getrecommendations! Published in 2019 at "Materials Science and Technology"
DOI: 10.1080/02670836.2019.1636178
Abstract: ABSTRACT A novel short duration heat treatment schedule is proposed in the present investigation for the Al-17 wt-% Si-5 wt-% Cu alloy (AR alloy). The existing heat treatment uses long duration (4–24 h) holding at solutionising temperature prior… read more here.
Keywords: heat treatment; alloy; modification ageing; treatment ... See more keywords