Microstructure, Hardness, and Tensile Properties of Additively Manufactured Low‐Alloy Steel: A Review
Sign Up to like & getrecommendations! Published in 2025 at "steel research international"
DOI: 10.1002/srin.202400421
Abstract: As additive manufacturing (AM) shows great promise in generating functional parts, the list of printable ferrous alloys is growing steadily. Low‐alloy steels are such alloys that hold the prospect of being low cost and possessing… read more here.
Keywords: low alloy; microstructure hardness; alloy steels; alloy ... See more keywords
Study on Fe-xGO Composites Prepared by Selective Laser Melting: Microstructure, Hardness, Biodegradation and Cytocompatibility
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03814-z
Abstract: The problem of the degradation rate being too slow is a key technical bottleneck to clinical applications for pure iron (Fe), a promising candidate biodegradable metal. This work used powders of pure Fe and graphene… read more here.
Keywords: microstructure hardness; xgo composites; degradation rate;
Experiments and Modeling to Characterize Microstructure and Hardness in 304L
Sign Up to like & getrecommendations! Published in 2017 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-017-0335-z
Abstract: Drawn 304L stainless steel tubing was subjected to 42 different annealing heat treatments with the goal of initializing a microstructural model to select a heat treatment to soften the tubing from a hardness of 305… read more here.
Keywords: recrystallization; microstructure hardness; heat; model ... See more keywords
Microstructure and Hardness of Al2024-025 Mg Alloy after Plastic Deformation
Sign Up to like & getrecommendations! Published in 2017 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927617002677
Abstract: Al alloys possess many favorable characteristics which make them useful in a wide variety of application. Particularly, the Al2024 alloys are extensively used as structural materials in commercial airplanes owing to their good balance of… read more here.
Keywords: alloy; microstructure hardness; deformation microstructure; deformation ... See more keywords
Study of Microstructure and Hardness in A356 Aluminum Alloy Reinforced with Al2O3 and WC After Hot Extrusion.
Sign Up to like & getrecommendations! Published in 2020 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927620020826
Abstract: The A356 alloy system has as a principal alloying element the silicon, where the high levels of such element (4.0–13%) generate excellent casting characteristics [1]. In order to expand its application range, a method commonly… read more here.
Keywords: hardness a356; microstructure hardness; study microstructure; aluminum alloy ... See more keywords
Effect of WC content on microstructure, hardness, and wear properties of plasma cladded Fe–Cr–C–WC coating
Sign Up to like & getrecommendations! Published in 2021 at "Materials Research Express"
DOI: 10.1088/2053-1591/ac0b79
Abstract: The Q235 sample was coated with ball-milled Fe–Cr–C–WC powder using plasma cladding technology, and the influence of tungsten carbide (WC) content on the surface microstructure, hardness, and wear properties of the coated steel was evaluated.… read more here.
Keywords: microstructure hardness; cladding layer; hardness wear; microstructure ... See more keywords
Investigation of formation, microstructure and hardness of Ti-6Al-4V single tracks via Joule-fused filament additive manufacturing
Sign Up to like & getrecommendations! Published in 2024 at "Rapid Prototyping Journal"
DOI: 10.1108/rpj-04-2024-0181
Abstract: Purpose This paper aims to investigate a novel additive manufacturing (AM) method for titanium alloy using Joule heat as the single heat source to melt TC4 wire, which intends to provide a new low-power, low-cost… read more here.
Keywords: microstructure hardness; wire; joule; additive manufacturing ... See more keywords
Synthesis, microstructure, hardness, thermal expansion, and dielectric properties of cordierite
Sign Up to like & getrecommendations! Published in 2025 at "International Journal of Applied Ceramic Technology"
DOI: 10.1111/ijac.15173
Abstract: A cordierite precursor powder was synthesized using the sol–gel method and then sintered to produce a dense cordierite with a minimal amount of Mg–Al spinel and cristobalite. Thermal and spectroscopic techniques were employed to analyze… read more here.
Keywords: thermal expansion; synthesis microstructure; cordierite; microstructure hardness ... See more keywords
Effect of Friction Stir Processing on Microstructure and Hardness of Cast Hypo-Eutectic and Hyper-Eutectic Al-Si Alloys
Sign Up to like & getrecommendations! Published in 2025 at "Archives of Metallurgy and Materials"
DOI: 10.24425/amm.2025.153491
Abstract: The objective of this study was to ascertain the impact of Friction Stir Processing (FSP) on the microstructure and hardness of Al-Si alloys of hypo-eutectic (AlSi8) and hyper-eutectic (AlSi16) composition, with a particular focus on… read more here.
Keywords: stir processing; hypo eutectic; friction stir; microstructure hardness ... See more keywords
Microstructure, Hardness, and Corrosion Behavior of Oxidized AA6061 Using Potentiostatic Plasma Electrolytic Oxidation
Sign Up to like & getrecommendations! Published in 2025 at "Coatings"
DOI: 10.3390/coatings15101129
Abstract: Aluminum and its alloys are widely used in aerospace and industrial sectors due to their high specific strength, low density, and abundance. However, their low hardness, high corrosion susceptibility, and poor wear resistance limit broader… read more here.
Keywords: hardness corrosion; microstructure hardness; electrolytic oxidation; plasma electrolytic ... See more keywords
Microstructure, Hardness and EIS Evaluation of Ti-15Zr-5Nb Dental Alloy
Sign Up to like & getrecommendations! Published in 2024 at "Crystals"
DOI: 10.3390/cryst14070602
Abstract: Ti alloys have been widely used in biomedical applications due to their special properties. They have specific properties such as biocompatibility, biofunctionality and high corrosion resistance, which enable them to function inside the human body.… read more here.
Keywords: eis evaluation; hardness eis; microstructure hardness; alloy ... See more keywords