Effects of rotational speed on microstructure and mechanical properties of inertia friction-welded 7005–5083 aluminum alloy joints
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science"
DOI: 10.1007/s10853-020-04804-2
Abstract: The dissimilar welding of Al–Zn–Mg alloy (7005) plates and Al–Mg alloy (5083) rods was conducted using the inertia friction welding process. The effect of rotational speed during welding on the microstructure and mechanical properties of… read more here.
Keywords: rotational speed; alloy; microstructure mechanical; mechanical properties ... See more keywords
Influence of Cu/Mg ratio on microstructure and mechanical properties of Al–Zn–Mg–Cu alloys
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science"
DOI: 10.1007/s10853-020-05438-0
Abstract: The relationship between microstructure evolution and mechanical performance of Al–Zn–Mg–Cu alloys with varying Cu/Mg ratios was discussed in detail under different two-step aging (T7X). The results showed that the undissolved second-phase particles including σ -Al… read more here.
Keywords: fracture; ratio; microstructure mechanical; ratio microstructure ... See more keywords
Effect of Overaging Conditions on Microstructure and Mechanical Properties of Maraging Steel
Sign Up to like & getrecommendations! Published in 2020 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-020-00535-y
Abstract: The microstructure and mechanical properties of maraging steel 350 is studied after aging at 500 – 650°C. The yield strength, the ultimate strength, the impact energy, and the hardness of the steel are determined. The… read more here.
Keywords: maraging steel; microstructure mechanical; properties maraging; mechanical properties ... See more keywords
Effect of Build Orientation of Electron Beam Melting on Microstructure and Mechanical Properties of Ti-6Al-4V
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2502-4
Abstract: Build orientation influences thermal activity during the EBM process, thus affecting the resultant bulk material properties of the part being produced. This work focuses on EBM build orientation with respect to the X, Y and… read more here.
Keywords: microstructure mechanical; effect; build orientation; electron ... See more keywords
The Analysis of Strontium Modification on Microstructure and Mechanical Properties of Al-25%Mg2Si In Situ Composite
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2889-y
Abstract: This research was carried out to investigate the influence of Sr modification on the microstructure and mechanical properties of Al-25%Mg2Si. The mechanism of Sr modification was also discussed. Microstructural examination was carried out using optical… read more here.
Keywords: microstructure mechanical; modification microstructure; mechanical properties; mg2si ... See more keywords
Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Additively Manufactured AISI H13 Tool Steel
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2992-0
Abstract: The effect of heat treatment on microstructure and mechanical properties (microhardness, wear resistance and impact toughness) of laser additively manufactured AISI H13 tool steel was systemically investigated. To understand the variation of microstructure and mechanical properties… read more here.
Keywords: treatment; mechanical properties; effect heat; microstructure mechanical ... See more keywords
Microstructure, Mechanical Properties and Corrosion Behavior of Porous Mg-6 wt.% Zn Scaffolds for Bone Tissue Engineering
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3189-x
Abstract: Porous Mg-based scaffolds have been extensively researched as biodegradable implants due to their attractive biological and excellent mechanical properties. In this study, porous Mg-6 wt.% Zn scaffolds were prepared by powder metallurgy using ammonium bicarbonate particles… read more here.
Keywords: engineering; bone tissue; microstructure mechanical; porous scaffolds ... See more keywords
Effect of Deformation Temperature on the Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel During Hot Compression
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3510-8
Abstract: The microstructure and mechanical properties of high-strength low-alloy steel were investigated at deformation temperatures of 800-1100 °C and strain rates of 0.1-10 s−1 using an MMS-200 thermal mechanical simulator. The results indicated that the increased deformation… read more here.
Keywords: high strength; microstructure mechanical; properties high; deformation ... See more keywords
Microstructure and Mechanical Properties of Al-Mg-Sc-Zr Alloy Variable Polarity Plasma Arc Welding Joint
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3549-6
Abstract: Al-Mg-Sc-Zr alloy plates were welded by variable polarity plasma arc welding (VPPAW) with Sc-containing filler wire. The microstructure and mechanical properties were investigated. Results show that the weld zone and heat-affected zone (HAZ) are narrow… read more here.
Keywords: polarity plasma; plasma arc; microstructure mechanical; arc welding ... See more keywords
Microstructure and Mechanical Properties of Extruded Mg-7Sn-5Zn-xAl (x = 0, 1, 2 and 3 wt.%) Alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04053-8
Abstract: Microstructure and mechanical properties of extruded Mg-7Sn-5Zn-xAl (x = 0, 1, 2 and 3 wt.%) alloy were investigated. The as-cast Mg-7Sn-5Zn alloy mainly comprised α-Mg dendrites, Mg2Sn and nanosized Mg-Zn phases in a Mg matrix, whereas the quasicrystal… read more here.
Keywords: extruded 7sn; alloy; microstructure mechanical; properties extruded ... See more keywords
Effect of Forging on Microstructure, Mechanical Properties and Acoustic Emission Characteristics of Al Alloy (2014): 10 wt.% SiCp Composite
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04094-z
Abstract: In this paper a systematic study has been undertaken to study the effect of forging on microstructure, mechanical properties and acoustic emission (AE) characteristics of Al alloy (2014)—10 wt.% SiC metal-matrix composites. Hammer forging was… read more here.
Keywords: microstructure mechanical; properties acoustic; mechanical properties; effect forging ... See more keywords