Articles with "microstructure microhardness" as a keyword



Photo by introspectivedsgn from unsplash

Microstructure and microhardness of directionally solidified NiAl–W eutectic alloy

Sign Up to like & get
recommendations!
Published in 2019 at "Rare Metals"

DOI: 10.1007/s12598-019-01268-5

Abstract: The microstructure and microhardness of directionally solidified NiAl–W eutectic alloys at growth rates of 2–25 μm·s−1 were investigated by a Bridgman crystal growing facility at a temperature gradient of 300 K·cm−1. In view of the competitive growth… read more here.

Keywords: directionally solidified; microhardness directionally; eutectic alloys; solidified nial ... See more keywords
Photo from wikipedia

Effect of Trace Ce/La Addition on the Microstructure and Microhardness of Nanostructured Nickel-based Superalloy Inconel 718

Sign Up to like & get
recommendations!
Published in 2019 at "Microscopy and Microanalysis"

DOI: 10.1017/s1431927619011620

Abstract: The nickel-base superalloy Inconel 718, have excellent properties to be used in high temperature applications, its principal characteristics are: high resistance to oxidation, good mechanical properties in elevated work temperatures, owing of that the principal… read more here.

Keywords: trace addition; microstructure microhardness; addition microstructure; effect trace ... See more keywords
Photo from wikipedia

Effects of Second Phases on Microstructure, Microhardness, and Corrosion Behavior of Mg-3Sn-(1Ca) Alloys

Sign Up to like & get
recommendations!
Published in 2019 at "Materials"

DOI: 10.3390/ma12162515

Abstract: The effects of second phases on microstructure, microhardness, and corrosion behavior of aged Mg-3Sn (T3) and Mg-3Sn-1Ca (TX31) alloys are investigated systematically. The thermal stability of the CaMgSn phase is higher than that of the… read more here.

Keywords: microstructure; second phases; corrosion; phases microstructure ... See more keywords
Photo from wikipedia

A Comparison of Microstructure and Microhardness Properties of IN718 Fabricated via Powder- and Wire-Fed Laser-Directed Energy Deposition

Sign Up to like & get
recommendations!
Published in 2023 at "Materials"

DOI: 10.3390/ma16031129

Abstract: The objective of this work is to compare the microstructure and microhardness properties of IN718 deposited by both powder- and wire-fed laser-directed energy deposition (L-DED) processes. The powder-fed L-DED is carried out on an Optomec… read more here.

Keywords: fed specimen; powder; microstructure microhardness; wire ... See more keywords
Photo from wikipedia

Influence of Hafnium Addition on the Microstructure, Microhardness and Corrosion Resistance of Ti20Ta20Nb20(ZrMo)20−xHfx (where x = 0, 5, 10, 15 and 20 at.%) High Entropy Alloys

Sign Up to like & get
recommendations!
Published in 2023 at "Materials"

DOI: 10.3390/ma16041456

Abstract: The presented work aimed to investigate the influence of the hafnium/(zirconium and molybdenum) ratio on the microstructure, microhardness and corrosion resistance of Ti20Ta20Nb20(ZrMo)20−xHfx (where x = 0, 5, 10, 15 and 20 at.%) high entropy… read more here.

Keywords: influence hafnium; corrosion resistance; microstructure microhardness; hafnium ... See more keywords
Photo by drew_hays from unsplash

Microstructure, Microhardness, and Wear Properties of Cobalt Alloy Electrodes Coated with TiO2 Nanoparticles

Sign Up to like & get
recommendations!
Published in 2019 at "Metals"

DOI: 10.3390/met9111186

Abstract: In this paper, the influence of TiO2 nanoparticle coating on cobalt-based electrodes was studied. Different coating treatment times were applied, and the results were compared to the hard-faced layer obtained with unmodified electrodes. The hard… read more here.

Keywords: microstructure microhardness; microhardness wear; properties cobalt; hard faced ... See more keywords