Effects of Yttrium on the Microstructure and Properties of 20MnSi Steel
Sign Up to like & getrecommendations! Published in 2021 at "steel research international"
DOI: 10.1002/srin.202100198
Abstract: 20MnSi steel samples with different rare‐earth yttrium (Y) contents are prepared in the laboratory. Microstructure analysis is performed using the methods of microscopy and electron probe microanalysis, and the mechanical and physical properties are assessed… read more here.
Keywords: effects yttrium; yttrium microstructure; microstructure properties; 20mnsi steel ... See more keywords
Study on the microstructure and properties of low-Ag Sn–0.3Ag–0.7Cu–0.5Ga solder alloys bearing Pr
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-6537-y
Abstract: Effect of Pr element on the wettability, microstructure, interface morphology and mechanical property of Sn–0.3Ag–0.7Cu–0.5Ga–xPr solder has been studied. The result exhibits that the wettability of solders could significantly be improved by adding an approximate… read more here.
Keywords: 7cu 5ga; study microstructure; 3ag 7cu; microstructure properties ... See more keywords
Microstructure and Properties of Oil and Gas Range Pipe Steel Subjected to Improvement
Sign Up to like & getrecommendations! Published in 2019 at "Metallurgist"
DOI: 10.1007/s11015-019-00792-0
Abstract: The effect of alloying on the properties of highly tempered steels used for production of a range of petroleum pipes is studied. It is shown that an increase in molybdenum content from 0.15 to 0.53%… read more here.
Keywords: range; properties oil; gas range; microstructure properties ... See more keywords
Microstructure and Properties of the Al-27Si/Cu/Al-50Si Joint Brazed by the Partial Transient Liquid Phase Bonding
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-018-1264-1
Abstract: Al-27Si and Al-50Si were brazed by using a thin Cu interlayer. The metallurgical bonding without obvious defects is achieved, and a wide brazing seam consisting of fine eutectic structures and coarse Si particles is formed… read more here.
Keywords: 50si joint; liquid; 27si 50si; properties 27si ... See more keywords
Effects of Nb on the Microstructure and Properties of Ti-Added Hypereutectic High-Cr Cast Iron
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3516-2
Abstract: Effects of Nb on the microstructure and properties of Ti-added hypereutectic high-Cr cast iron were studied. With the addition of Nb, a new phase (Nb,Ti)C was formed. The microstructure analysis revealed that the amount of… read more here.
Keywords: added hypereutectic; hypereutectic high; microstructure properties; effects microstructure ... See more keywords
The Effects of Powder Composition on Microstructure and Properties of Hot-Pressed Matrix Materials for Sintered Diamond Tools
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04485-2
Abstract: The main objective of this investigation was to determine the effects of powder composition on microstructure and properties of iron-base materials used as matrices in sintered metal–diamond composites. Ball-milled Fe-Ni-Cu-Sn-C, Fe-Ni-Cu-Sn-C-Al 2 O 3 and… read more here.
Keywords: composition microstructure; powder composition; microstructure properties; composition ... See more keywords
Microstructure and properties of coarse-grained WC–10Co cemented carbides with different carbon contents during heat treatments
Sign Up to like & getrecommendations! Published in 2019 at "Rare Metals"
DOI: 10.1007/s12598-019-01276-5
Abstract: The effects of cryogenic treatment (CT) and tempering-cryogenic treatment (TCT) on the microstructure and properties of coarse-grained WC–10Co cemented carbides with different carbon contents were researched. The binder phase, WC mean grain sizes, W solubility… read more here.
Keywords: heat treatments; cemented carbides; carbides different; microstructure properties ... See more keywords
Physical simulation of additively manufactured super duplex stainless steels – microstructure and properties
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101269
Abstract: Abstract The behavior of high performance super duplex stainless steel (SDSS) during additive manufacturing (AM) has been investigated using a novel arc heat treatment technique. Tungsten inert gas (TIG) arc pulses were applied on a… read more here.
Keywords: duplex stainless; super duplex; microstructure properties; additively manufactured ... See more keywords
Microstructure and properties of in-situ Ti5Si3-TiC composite coatings by reactive plasma spraying
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.145264
Abstract: Abstract Ti powders, Si powders, and sucrose as a carbonaceous precursor were used to prepare Ti-Si-C composite powders by a spray-drying/precursor-pyrolysis technology. Ti-Si-C composite coatings were in-situ synthesized by reactive plasma spraying of Ti-Si-C composite… read more here.
Keywords: ti5si3 tic; composite coatings; reactive plasma; microstructure properties ... See more keywords
Effect of annealing in Ar on the microstructure and properties of thick nano-grained TiN ceramic coatings
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.04.091
Abstract: Abstract Thick nano-grained titanium nitride (TiN) coatings fabricated by reactive plasma spraying of micrometer-sized Ti powders possess very desirable properties; however, high brittleness restricts their engineering applications. Annealing processes were carried out at different temperatures… read more here.
Keywords: nano grained; thick nano; microstructure properties; effect annealing ... See more keywords
Effect of solidification process on microstructure and properties of Al 2 O 3 /Er 3 Al 5 O 12 eutectic ceramic
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.06.206
Abstract: Abstract Al2O3/Er3Al5O12 (EAG) binary eutectic ceramics were prepared by induction heating and the effects of the solidification process on the microstructure and properties of eutectic ceramic were investigated, such as the Natural Cooling Solidified Method… read more here.
Keywords: properties eutectic; solidification process; solidification; microstructure properties ... See more keywords