Sign Up to like & get
recommendations!
1
Published in 2017 at "Colloid and Polymer Science"
DOI: 10.1007/s00396-017-4220-8
Abstract: In this work, the effect of annealing on microstructure and tensile properties of polypropylene (PP) cast film was investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), SEM, etc. The…
read more here.
Keywords:
annealing microstructure;
effect annealing;
tensile properties;
microstructure tensile ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Metals and Materials International"
DOI: 10.1007/s12540-018-0123-6
Abstract: This study investigated the microstructure, tensile and fatigue properties of Al–5 wt.%Mg alloy manufactured by twin roll strip casting. Strips cast as a fabricated (F) specimen and a specimen heat treated (O) at 400 °C/5 h were produced…
read more here.
Keywords:
properties alloy;
fatigue properties;
strip;
fatigue ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00530-w
Abstract: The present study aimed at investigating the effect of Ca (0–3 wt%) on the microstructure and tensile properties of as-cast and as-extruded Mg–Zn alloy, in which tensile tests, X-ray diffraction, SEM, EDX and texture analysis…
read more here.
Keywords:
alloy;
tensile properties;
properties 5zn;
tensile ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-020-00393-1
Abstract: The effect of manganese (Mn) on the microstructure, tensile and impact properties of SA508Gr.4N steel has been experimentally investigated. The influence of Mn content on the substructure of SA508Gr.4N steel was investigated using the scanning…
read more here.
Keywords:
microstructure tensile;
tensile impact;
effect;
sa508gr steel ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "International Journal of Refractory Metals and Hard Materials"
DOI: 10.1016/j.ijrmhm.2019.02.020
Abstract: Abstract This work presents a study of tensile behavior for a Ti-28 at.%Ta alloy with low modulus and remarkable superelasticity. The Ti-28Ta alloy was firstly fabricated by melting the Ti/Ta powder mixture, followed by hot swaging.…
read more here.
Keywords:
28ta alloy;
microscopy;
electron microscopy;
microstructure tensile ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.05.049
Abstract: Abstract The effects of Ce and/or Mg on the microstructure and tensile properties of Al-Si-Mg-Fe alloys have been systematically investigated. Results showed that the separate addition of Mg or Ce could cause grain and eutectic…
read more here.
Keywords:
effects microstructure;
combined addition;
tensile properties;
microstructure tensile ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110513
Abstract: Abstract In this work, rotary die equal channel angular pressing (RD-ECAP) was up-scaled to produce large CP-Ti billets with a cross section of 50 × 50 mm2 for 4 and 8 passes. Hardness distributions were measured on the…
read more here.
Keywords:
ecap;
anisotropy pure;
tensile anisotropy;
microstructure tensile ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
0
Published in 2020 at "Materialia"
DOI: 10.1016/j.mtla.2020.100758
Abstract: Abstract Selective laser melting (SLM) was used to fabricate an AlCuMnZr alloy. The microstructural features that resulted from additive manufacturing (AM) were significantly refined compared to the corresponding cast alloy features. A combination of fine…
read more here.
Keywords:
manufactured alcumnzr;
alloy;
microstructure tensile;
additively manufactured ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65362-6
Abstract: Abstract The effects of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg−8Li−3Al− (1,2,3)Sn (wt.%) alloys were investigated by X-ray diffractometry (XRD), optical microscopy (OM), scanning electron microscopy (SEM) and tensile test.…
read more here.
Keywords:
microscopy;
3al alloys;
8li 3al;
tensile properties ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Journal of Natural Fibers"
DOI: 10.1080/15440478.2021.1944430
Abstract: –The sustainable utilisation of Kenaf fibres (KF) as environmentally friendly reinforcement in mortar, concrete and polymer composites promotes the concept of a circular economy and sustainable con...
read more here.
Keywords:
tensile water;
sorption characteristics;
characteristics surface;
microstructure tensile ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Metals"
DOI: 10.3390/met9020182
Abstract: The present work investigates the microstructure and tensile properties of a hot rolled 6061 alloy quenched by cold rolls (RQ) at different preheating temperatures. The preheating temperature strongly affects microstructure evolution and mechanical properties. Low…
read more here.
Keywords:
tensile properties;
microstructure tensile;
temperature;
preheating temperature ... See more keywords