Sign Up to like & get
recommendations!
1
Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01927-7
Abstract: Ti–6Al–4V is commonly used material in automobile, aerospace, biomedical and marine due to its excellent properties. However, their uses are reduced because their its poor tribological performance. In the current study, stainless steel 420 alloy…
read more here.
Keywords:
laser;
laser cladded;
base material;
material ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Materials Characterization"
DOI: 10.1016/j.matchar.2021.111020
Abstract: Abstract In this work, a quasi-continuous ratio gradient alloy steel with a 24CrNiMo matrix for high-speed railway brake discs is prepared by selective laser melting (SLM). The composition of sample is x% 24CrNiMo + (1-x)% wear-resistant stainless…
read more here.
Keywords:
steel;
wear mechanism;
alloy steel;
microstructure wear ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.02.083
Abstract: Abstract NiCrBSiNb coating was fabricated on AISI 1045 steel ring by plasma spraying and induction heating method. Then the microstructure, mechanical properties and wear resistance of the coating were studied. Results showed that the defects…
read more here.
Keywords:
resistance;
resistance plasma;
microstructure wear;
wear resistance ... See more keywords
Photo from academic.microsoft.com
Sign Up to like & get
recommendations!
1
Published in 2019 at "RSC Advances"
DOI: 10.1039/c9ra04651h
Abstract: The properties and friction behavior of ZCuPb20Sn5 modified with P were investigated.
read more here.
Keywords:
properties zcupb20sn5;
content microstructure;
zcupb20sn5 alloy;
microstructure wear ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Surface Engineering"
DOI: 10.1080/02670844.2020.1840697
Abstract: ABSTRACT In situ synthesized TiN and TiB reinforced metal matrix composite coating was fabricated on Ti-55511 by laser cladding with Ti-55511/BN powder mixture (2 wt-% BN). Results indicated that coating was mainly composed of TiB,…
read more here.
Keywords:
wear resistance;
aging microstructure;
composite coating;
effect aging ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Advances in Materials and Processing Technologies"
DOI: 10.1080/2374068x.2021.1927649
Abstract: Metal matrix composites (MMCs) processed with significant technological interventions offer excellent properties at reduced cost resulted in a wide range of engineering applications. In MMCs, ensur...
read more here.
Keywords:
mechanical microstructure;
6113 fly;
microstructure wear;
wear properties ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Sensors and Materials"
DOI: 10.18494/sam.2019.2108
Abstract: The developments of biodegradable materials for orthopaedic implants has been progressing rapidly for decades. Biodegradable implants can eliminate the need for a second surgery and avoid the possible risks of retained metallic implants, such as…
read more here.
Keywords:
heat;
heat treatment;
wear property;
different heat ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2023 at "Coatings"
DOI: 10.3390/coatings13050826
Abstract: This study aimed to evaluate the microstructure and wear resistance of laser cladding coatings with different energy densities in the case of a preset 0.5 mm thick Zr702 alloy plate to determine the specific present…
read more here.
Keywords:
wear resistance;
energy density;
microstructure wear;
energy ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Coatings"
DOI: 10.3390/coatings9040261
Abstract: In order to improve the wear resistance of TC11 titanium alloy, a mixture of ZrN (10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.%) and TC11 alloy powders are laser cladded on a forged TC11…
read more here.
Keywords:
zrn addition;
microstructure;
zrn;
microstructure wear ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma16010284
Abstract: To improve the wear resistance of high-strength and high-conductivity Cu–Cr–Zr alloys in high-speed and heavy load friction environments, coatings including Ni–Cu, Ni–Cu-10(W,Si), Ni–Cu–10(Mo,W,Si), and Ni–Cu–15(Mo,W,Si) (with an atomic ratio of Mo,W to Si of 1:2)…
read more here.
Keywords:
microstructure wear;
wear resistance;
laser clad;
resistance ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16031193
Abstract: Based on multi-component alloys using precipitation hardening, a Cu-Ni-Si-Fe copper alloy was prepared and studied for hardness, electrical conductivity, and wear resistance. Copper Nickel Silicon (Cu-Ni-Si) intermetallic compounds were observed as precipitates, leading to an…
read more here.
Keywords:
microstructure wear;
wear;
wear properties;
investigation microstructure ... See more keywords