Study on the effect of wet mixing process on the properties of EPDM rubber/fiber/hollow glass microsphere composite system
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.56270
Abstract: Compared to the traditional open mixing process used for the production of the rubber composites, wet mixing process is a lower shear force mixing method. This article revealed the influence of the open mixing process… read more here.
Keywords: process; mixing process; wet mixing; glass microsphere ... See more keywords
Analysis of mixing in high-explosive fireballs using small-scale pressurised spheres
Sign Up to like & getrecommendations! Published in 2019 at "Shock Waves"
DOI: 10.1007/s00193-018-0814-4
Abstract: After the detonation of an oxygen-deficient homogeneous high explosive, a phase of turbulent combustion, called afterburning, takes place at the interface between the rich detonation products and air. Its modelling is instrumental for the accurate… read more here.
Keywords: analysis mixing; detonation; mixing high; high explosive ... See more keywords
Mixing process of two streams within a steam ejector from the perspectives of mass, momentum and energy transfer
Sign Up to like & getrecommendations! Published in 2020 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2020.116358
Abstract: Abstract There is not a specific technical proposal to be able to achieve a clear presentation of the complex mixing process between the primary and entrained flows within the steam ejector. In this study, a… read more here.
Keywords: ejector; mass; mixing process; process ... See more keywords
Micromixing-assisted preparation of TiO2 films from ammonium hexafluorotitanate and urea by liquid phase deposition based on simulation of mixing process in T-shaped micromixer
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.02.210
Abstract: Abstract Preparation of well-ordered TiO2 films from alkaline solution by liquid phase deposition (LPD) method is still challenging owing to the fact that, in traditional mixing process, several disadvantages exist in controllable homogenous chemical reactions.… read more here.
Keywords: tio2 films; phase deposition; mixing process; liquid phase ... See more keywords
Influence of the mixing process on the graphitization of phenolic resins
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.03.124
Abstract: Abstract Phenolic resins are usually incorporated into carbon-containing refractories (CCRs) to play a role as binder compounds. Among the benefits associated with the role of these organic compounds, the following can be pointed out: (i)… read more here.
Keywords: phenolic resins; influence mixing; graphitization; mixing process ... See more keywords
Hydrodynamics and mixing process in a horizontal self-cleaning opposite-rotating twin-shaft kneader
Sign Up to like & getrecommendations! Published in 2021 at "Chemical Engineering Science"
DOI: 10.1016/j.ces.2021.116700
Abstract: Abstract The finite element method (FEM) simulation was adopted to investigate the hydrodynamics in an opposite-rotating horizontal self-cleaning twin-shaft kneader with a highly viscous Newtonian fluid. The complicated motion of impellers was simulated by using… read more here.
Keywords: hydrodynamics; horizontal self; shaft; opposite rotating ... See more keywords
Granular dynamics in a vertical bladed mixer: Secondary flow patterns
Sign Up to like & getrecommendations! Published in 2019 at "Powder Technology"
DOI: 10.1016/j.powtec.2018.11.094
Abstract: Abstract This article deals with numerical simulations and experimental measurements of the granular mixing process in a vertical cylindrical mixer with two opposed flat blades with a 45° rake angle. The computer simulations were conducted… read more here.
Keywords: secondary flow; granular dynamics; dynamics vertical; experimental measurements ... See more keywords
DEM study of the influences of the geometric and operational factors on the mechanical responses of an underwater mixing process
Sign Up to like & getrecommendations! Published in 2021 at "Powder Technology"
DOI: 10.1016/j.powtec.2021.06.049
Abstract: Abstract Mixing granular materials plays versatile roles in many engineering fields. In this study, we focus on an underwater mixing process as a novel application for offshore mining. We apply the discrete element method (DEM),… read more here.
Keywords: underwater mixing; process; dem; geometric operational ... See more keywords
Study of the Geometrical Effects of Impeller on the Flow Field in Hybrid Mixing Process for Manufacturing Nanocomposites
Sign Up to like & getrecommendations! Published in 2019 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2019.06.136
Abstract: Abstract For liquid-based processing of nanocomposite materials, mechanical stirring and ultrasonic processing are two different physical processes that are widely used for mixing of nanomaterials in a liquid medium such as molten metals or polymer… read more here.
Keywords: process; flow field; hybrid mixing; mixing process ... See more keywords
Dynamic Mixing Process of Dissimilar Particles in Three-Dimensional Fluidized Beds
Sign Up to like & getrecommendations! Published in 2025 at "ACS Omega"
DOI: 10.1021/acsomega.5c01623
Abstract: A comprehensive study on the dynamic mixing process of biomass particles and inert particles in a cylindrical fluidized bed is conducted. The particle mixing parameters at multipositions inside three-dimensional fluidized beds are obtained by a… read more here.
Keywords: mixing process; dynamic mixing; particle mixing; particle ... See more keywords
Thermal mixing and structure of the jet in swirling crossflow
Sign Up to like & getrecommendations! Published in 2024 at "Physics of Fluids"
DOI: 10.1063/5.0222782
Abstract: The dilution zone in modern aero-engine combustors is characterized by a strong swirling mainstream with weak transverse jets. This characteristic brings new challenges in homogenizing the temperature distribution at the combustor exit. Therefore, it is… read more here.
Keywords: temperature; mixing process; jet; jet swirling ... See more keywords