Articles with "modeling study" as a keyword



Photo from academic.microsoft.com

Physical Modeling Study on the Mixing in the New IronArc Process

Sign Up to like & get
recommendations!
Published in 2018 at "Steel Research International"

DOI: 10.1002/srin.201700555

Abstract: IronArc is a newly developed technology for pig iron production with the aim to reduce the CO2 emission and energy consumption, compared to a conventional blast furnace route. In order to understan ... read more here.

Keywords: modeling study; ironarc process; physical modeling; new ironarc ... See more keywords
Photo by aaronburden from unsplash

Experimental and modeling study of RDX in a novel continuous dryer

Sign Up to like & get
recommendations!
Published in 2017 at "Applied Thermal Engineering"

DOI: 10.1016/j.applthermaleng.2016.10.121

Abstract: Abstract The drying of energetic materials is an essential and hazardous process involving complicated heat and mass transfer. In this paper, the drying properties of Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) are investigated using a novel developed continuous dryer… read more here.

Keywords: modeling study; experimental modeling; dryer; rdx novel ... See more keywords
Photo by priscilladupreez from unsplash

Empirical and modeling study of emotional state dynamics in social videogame paradigms

Sign Up to like & get
recommendations!
Published in 2020 at "Cognitive Systems Research"

DOI: 10.1016/j.cogsys.2019.12.001

Abstract: Abstract The objective of this work was to study the dynamics of human emotional states in the process of social interaction in a virtual environment. The previously developed for this purpose prototypes of the virtual… read more here.

Keywords: social videogame; dynamics social; modeling study; empirical modeling ... See more keywords
Photo from wikipedia

A chemical kinetic modeling study of indene pyrolysis

Sign Up to like & get
recommendations!
Published in 2019 at "Combustion and Flame"

DOI: 10.1016/j.combustflame.2019.04.040

Abstract: Abstract An improved polycyclic aromatic hydrocarbon (PAH) model is developed to predict the decomposition of indene and the formation of large PAHs under pyrolytic conditions. This model is developed based on experimental study of pyrolytic… read more here.

Keywords: pah; pah growth; kinetic modeling; study ... See more keywords
Photo from wikipedia

Experimental and kinetic modeling study on 1,3-cyclopentadiene oxidation and pyrolysis

Sign Up to like & get
recommendations!
Published in 2020 at "Combustion and Flame"

DOI: 10.1016/j.combustflame.2019.10.032

Abstract: Abstract The oxidation of 1,3-cyclopentadiene (c-C5H6), a key intermediate formed in the combustion of aromatic and cyclic hydrocarbon fuels and formation of polycyclic aromatic hydrocarbons (PAHs), was studied in a jet-stirred reactor (JSR) under the… read more here.

Keywords: kinetic modeling; modeling study; oxidation; experimental kinetic ... See more keywords
Photo from wikipedia

Detailed experimental and kinetic modeling study of toluene/C2 pyrolysis in a single-pulse shock tube

Sign Up to like & get
recommendations!
Published in 2021 at "Combustion and Flame"

DOI: 10.1016/j.combustflame.2020.11.044

Abstract: Abstract A combined experimental and kinetic modeling study is carried out to explore the influences of acetylene and ethylene addition on the species formation from toluene pyrolysis. Experiments are conducted separately with four different argon-diluted… read more here.

Keywords: kinetic modeling; modeling study; pyrolysis; experimental kinetic ... See more keywords
Photo from wikipedia

An experimental and kinetic modeling study of NOx sensitization on methane autoignition and oxidation

Sign Up to like & get
recommendations!
Published in 2021 at "Combustion and Flame"

DOI: 10.1016/j.combustflame.2021.111746

Abstract: Abstract An experimental and kinetic modeling study of the influence of NOx (i.e. NO2, NO and N2O) addition on the ignition behavior of methane/‘air’ mixtures is performed. Ignition delay time measurements are taken in a… read more here.

Keywords: kinetic modeling; modeling study; experimental kinetic; ignition ... See more keywords
Photo from wikipedia

Experimental and modeling study of blended membranes for direct methanol fuel cells

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Membrane Science"

DOI: 10.1016/j.memsci.2018.07.016

Abstract: Abstract The dynamics of hydronium ions and methanol molecules in hydrated SPAES and blend membranes are investigated via molecular dynamics simulations using the COMPASS force field. In addition to calculating the diffusion coefficients as a… read more here.

Keywords: modeling study; diffusion; experimental modeling; methanol ... See more keywords
Photo from archive.org

Molecular modeling study concerning the self-assembly capacity of some photosensitive amphiphilic polysiloxanes

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Molecular Liquids"

DOI: 10.1016/j.molliq.2019.112298

Abstract: Abstract The understanding of self-assembly conditions has become the main purpose of experimental and theoretical research studies on micelles. Association of the micelles in clusters is a challenging topic, given the enhanced complexity of cluster… read more here.

Keywords: molecular modeling; modeling study; self assembly; concerning self ... See more keywords
Photo from wikipedia

Kinetic Modeling Study of the Effect of Iron on Ignition and Combustion of n-Heptane in Counter-flow Diffusion Flames

Sign Up to like & get
recommendations!
Published in 2017 at "Energy & Fuels"

DOI: 10.1021/acs.energyfuels.6b02179

Abstract: A kinetic modeling study of the effect of iron on the ignition and combustion characteristics of diesel, modeled as n-heptane, in compression ignition engines was carried out using CHEMKIN PRO. The ignition was simulated using… read more here.

Keywords: kinetic modeling; modeling study; combustion; ignition ... See more keywords
Photo by aaronburden from unsplash

Modeling Study of the Impact of Blending N2, CO2, and H2O on Characteristics of CH4 Laminar Premixed Combustion

Sign Up to like & get
recommendations!
Published in 2019 at "Energy & Fuels"

DOI: 10.1021/acs.energyfuels.9b02108

Abstract: N₂, CO₂, and H₂O are impurity components in the biogas fuel production process, which are added at an appropriate amount to the combustion of hydrocarbon fuel that can effectively reduce the emissions of NOₓ and… read more here.

Keywords: premixed combustion; chemical effects; study impact; combustion ... See more keywords