Effects of additive NaI on electrodeposition of Al coatings in AlCl3-NaCl-KCl molten salts
Sign Up to like & getrecommendations! Published in 2020 at "Frontiers of Chemical Science and Engineering"
DOI: 10.1007/s11705-020-1935-8
Abstract: Effects of NaI as an additive on electrodeposition of Al coatings in AlCl 3 -NaCl-KCl (80-10-10 wt-%) molten salts electrolyte at 150 °C were investigated by means of cyclic voltammetry, chronopotentiometry, scanning electron microscopy and… read more here.
Keywords: kcl molten; electrodeposition coatings; nacl kcl; molten salts ... See more keywords
Performance of molten sodium vs. molten salts in a packed bed thermal energy storage
Sign Up to like & getrecommendations! Published in 2018 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2018.05.080
Abstract: Abstract Concentrating solar power plants are currently working with Solar Salt and conventional Rankine steam power cycles with upper temperatures of 565 ° C. To achieve higher efficiencies, advanced power cycles are currently investigated (500–700 … read more here.
Keywords: packed bed; storage; sodium; power ... See more keywords
Binary molten salts mediated defect engineering on hexagonal boron nitride catalyst with long-term stability for aerobic oxidative desulfurization
Sign Up to like & getrecommendations! Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2021.149724
Abstract: Abstract Molten salts mediation is a potential strategy for the development of functional materials. Herein, a controllable defect engineering on the hexagonal boron nitride (h-BN) was approached via the binary molten salts (BMS) mediated strategy.… read more here.
Keywords: hexagonal boron; boron nitride; catalyst; defect engineering ... See more keywords
Amorphous silicon from low-temperature reduction of silica in the molten salts and its lithium-storage performance
Sign Up to like & getrecommendations! Published in 2020 at "Chinese Chemical Letters"
DOI: 10.1016/j.cclet.2020.11.041
Abstract: ABSTRACT Amorphous silicon (a-Si) is one of the most promising anode-materials for the lithium-ion battery owing to its large capacity and superior fracture resistance. However, a-Si is usually fabricated with the sophisticated chemical vapor deposition… read more here.
Keywords: temperature reduction; reduction; low temperature; capacity ... See more keywords
Corrosive and mechanical resistance of MgO ceramics under metallizing and mild chlorination of spent nuclear fuel in molten salts
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.09.171
Abstract: Abstract The present work is aimed at the study of the unirradiated and irradiated MgO ceramics corrosion and mechanical properties in the molten LiCl at 650–750 °C with addition of UCl3 and Li2O(LiCl + nLi2O and LiCl + mUCl3 molten… read more here.
Keywords: spent nuclear; mgo; mgo ceramics; corrosion ... See more keywords
In-situ removal of sulfur from high sulfur solid waste during molten salt pyrolysis
Sign Up to like & getrecommendations! Published in 2018 at "Fuel"
DOI: 10.1016/j.fuel.2018.05.123
Abstract: Abstract In order to address the adverse effects of high sulfur content on the subsequent use of pyrolysis char, the removal of sulfur from high sulfur solid waste during molten salts pyrolysis was studied in… read more here.
Keywords: pyrolysis; sulfur; pyrolysis char; molten salts ... See more keywords
Silicon prepared by electro-reduction in molten salts as new energy materials
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Energy Chemistry"
DOI: 10.1016/j.jechem.2019.11.005
Abstract: Abstract Silicon has a large impact on the energy supply and economy in the modern world. In industry, high purity silicon is firstly prepared by carbothermic reduction of silica with the produced raw silicon being… read more here.
Keywords: reduction; energy; prepared electro; silicon prepared ... See more keywords
Synthesis, structural and thermal properties of the hexapyrrolidinocyclotriphosphazenes-based protic molten salts: Antiproliferative effects against HT29, HeLa, and C6 cancer cell lines
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Molecular Liquids"
DOI: 10.1016/j.molliq.2017.01.067
Abstract: Abstract Novel three protic ionic liquids or protic molten salts (PILs) (1a, 1b, and 1c) were obtained from the reactions of hexapyrrolidinocyclotriphosphazenes, [N3P3(NC4H8)6] PYR (1), with the gentisic (2,5-dihydroxy benzoic), decanoic and boric acids. The… read more here.
Keywords: protic molten; thermal properties; cell; cancer cell ... See more keywords
Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: A critical review
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Molecular Liquids"
DOI: 10.1016/j.molliq.2020.113807
Abstract: Abstract Molten salts (MSs) are known for their advantages, such as being cheap, abundant in supply and can be operated at high temperatures. These advantages permit them for potential application as sensible storage media and… read more here.
Keywords: improvement; concentrated solar; power; solar power ... See more keywords
Forced convection heat transfer of molten Salts: A review
Sign Up to like & getrecommendations! Published in 2020 at "Nuclear Engineering and Design"
DOI: 10.1016/j.nucengdes.2020.110591
Abstract: Abstract Molten salts are used in a wide range of engineering platforms, with particular niche involving high-temperature thermo-fluidic applications. Molten salts are employed as industrial working fluids for several high temperature processing applications, including: as… read more here.
Keywords: heat; molten salts; molten salt; heat transfer ... See more keywords
Lithium nitrate purity influence assessment in ternary molten salts as thermal energy storage material for CSP plants
Sign Up to like & getrecommendations! Published in 2020 at "Renewable Energy"
DOI: 10.1016/j.renene.2019.10.075
Abstract: Abstract The addition of lithium nitrate is assumed to improve the performance of molten salts, extending the work temperature range. This paper presents an evaluation of the influence of different degrees of purity of LiNO3,… read more here.
Keywords: lithium nitrate; purity; influence; mixture ... See more keywords