In Situ Phase Transformation to form MoO3−MoS2 Heterostructure with Enhanced Printable Sodium Ion Storage
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202311471
Abstract: Molybdenum trioxide (MoO3) possesses high energy density but often suffers from poor electrical conductivity and limited cycling stability when used as a sodium‐ion battery (SIB) anode. To address these issues, the construction of （Molybdenum trioxide‐Molybdenum… read more here.
Keywords: sodium ion; moo3 mos2; moo3;
Self-Templated Fabrication of MoNi4 /MoO3-x Nanorod Arrays with Dual Active Components for Highly Efficient Hydrogen Evolution.
Sign Up to like & getrecommendations! Published in 2017 at "Advanced materials"
DOI: 10.1002/adma.201703311
Abstract: A binder-free efficient MoNi4 /MoO3-x nanorod array electrode with 3D open structure is developed by using Ni foam as both scaffold and Ni source to form NiMoO4 precursor, followed by subsequent annealing in a reduction… read more here.
Keywords: moo3; hydrogen; moni4 moo3; moo3 nanorod ... See more keywords
Growth of MoS2–MoO3 Hybrid Microflowers via Controlled Vapor Transport Process for Efficient Gas Sensing at Room Temperature
Sign Up to like & getrecommendations! Published in 2018 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.201800071
Abstract: DOI: 10.1002/admi.201800071 thin devices. From the past few years, transition metal dichalcogenides (TMDCs) materials analogous to graphene have received captivated attention because of their unconventional mechanical, electrical, physical, and structural properties.[1,2] MoS2, being the frontrunner… read more here.
Keywords: mos2 moo3; mos2; moo3; room temperature ... See more keywords
Photochromic Response and Steady‐State Photoconductivity of Fibrous‐Reticulated α‐MoO3 Thin Films Prepared by Modified Spray Pyrolysis Technique
Sign Up to like & getrecommendations! Published in 2019 at "Crystal Research and Technology"
DOI: 10.1002/crat.201900122
Abstract: A modified spray pyrolysis technique is used for preparing α‐MoO3 thin films after subsequent heat treatment at a relatively low temperature. The spray parameters are selected through a wide variety of elaboration conditions for best… read more here.
Keywords: moo3; thin films; film; pyrolysis technique ... See more keywords
Few‐Layered MoS2 and MoOx Materials Using Wafers of Alternated MoO3 and S Foils as Catalysts: Chemical Vapor Deposition Experiments
Sign Up to like & getrecommendations! Published in 2025 at "Crystal Research and Technology"
DOI: 10.1002/crat.70025
Abstract: A novel one‐step chemical vapor deposition approach is introduced for synthesizing high‐density vertical molybdenum disulfide (MoS2) nanoflakes and molybdenum dioxide (MoO2) structures using pelletized MoO3/S precursors and abrupt thermal cycling. Unlike conventional multi zone sulfurization… read more here.
Keywords: vapor deposition; deposition; chemical vapor; layered mos2 ... See more keywords
Ultraviolet Photodetector Fabrication with Low-Power Dissipation Based on Organic Suboptimal Source-Gated Transistor Architecture and MoO3-Doped Pentacene.
Sign Up to like & getrecommendations! Published in 2024 at "Small"
DOI: 10.1002/smll.202408772
Abstract: Organic field-effect transistor (OFET)-based photodetectors have been extensively studied owing to their potential applications in various fields, such as imaging, communication, and environmental monitoring. However, the traditional OFET structure brings about high power consumption. Furthermore,… read more here.
Keywords: transistor; power consumption; suboptimal source; low power ... See more keywords
Solvothermal synthesis of molybdenum oxide on liquid-phase exfoliated graphene composite electrodes for aqueous supercapacitor application
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-6391-y
Abstract: MoO3–graphene nanocomposites have been prepared through a green and facile synthesis method and serve as the main electrode materials for electrochemical capacitor in mild aqueous electrolyte. First, graphene sheets were synthesized via mild sonication treatment… read more here.
Keywords: moo3; moo3 graphene; spectroscopy; synthesis ... See more keywords
Enhanced triethylamine gas sensing performance of the PbS nanoparticles-functionalized MoO3 nanobelts
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-00566-5
Abstract: To further enhance the sensing properties of metal oxide semiconductor, the combination with some metal sulfide will be an effective method. In our research, the heterostructures of MoO3 nanobelts and PbS nanoparticles were successfully synthesized… read more here.
Keywords: moo3; functionalized moo3; moo3 nanobelts; nanoparticles functionalized ... See more keywords
One-dimensional MoO3 coated by carbon for supercapacitor with enhanced electrochemical performance
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-00973-2
Abstract: MoO3, as a potential electrode material in energy storage, has recently been attracted increasing attention in supercapacitor. However, due to the poor electrical conductivity of MoO3, its practical application is limited. In this work, the… read more here.
Keywords: moo3; carbon; one dimensional; supercapacitor ... See more keywords
Electrical characterization of Ag/MoO3−x/p-Si Schottky diodes based on MoO3−x synthesized via sol–gel method: an investigation on frequency and voltage dependence
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-024-12559-8
Abstract: MoO3−x is a commonly used buffer layer in organic based optoelectronic devices to align energy level between active semiconductor and metal layer. The purpose of this study is to show the effects of the MoO3−x… read more here.
Keywords: moo3 interlayer; gel method; moo3 schottky; sol gel ... See more keywords
Synthesis and Characterization of 1D-MoO3 Nanorods Using Abutilon indicum Extract for the Photoreduction of Hexavalent Chromium
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Inorganic and Organometallic Polymers and Materials"
DOI: 10.1007/s10904-018-0970-0
Abstract: In this present work, we report a novel green synthesis of MoO3 nanorods (NRs) utilizing Abutilon Indicum (A. Indicum) plant extract, containing palmitric, linoleic, linolinic acids and their derivatives which might be acting as both… read more here.
Keywords: moo3; indicum; moo3 nanorods; abutilon indicum ... See more keywords