Articles with "moo3 thin" as a keyword



Photo by headwayio from unsplash

Ultrahigh Stability 3D TI Bi2Se3/MoO3 Thin Film Heterojunction Infrared Photodetector at Optical Communication Waveband

Sign Up to like & get
recommendations!
Published in 2020 at "Advanced Functional Materials"

DOI: 10.1002/adfm.201909659

Abstract: Infrared (IR) detection at 1300–1650 nm (optical communication waveband) is of great significance due to its wide range of applications in commerce and military. Three dimensional (3D) topological insulator (TI) Bi2Se3 is considered a promising… read more here.

Keywords: communication waveband; moo3 thin; communication; optical communication ... See more keywords
Photo from wikipedia

Chromogenic MoO3 thin films: thermo-, photo-, and electrochromic response to working pressure variation in rf reactive magnetron sputtering

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Materials Science: Materials in Electronics"

DOI: 10.1007/s10854-018-9101-5

Abstract: The thermochromic, photochromic, and electrochromic properties of molybdenum trioxide (MoO3) thin films were studied. MoO3 thin films were deposited by rf reactive magnetron sputtering and the influence of deposition parameters, i.e. O2/Ar gas ratio and… read more here.

Keywords: magnetron sputtering; moo3 thin; thin films; response ... See more keywords

Photochromic response of the PLD-grown nanostructured MoO3 thin films

Sign Up to like & get
recommendations!
Published in 2021 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2021.149580

Abstract: Abstract We have studied the PLD-grown nanostructured MoO3 thin film for its photochromic performance. MoO3 nanostructures were grown at room-temperature using PLD technique and subsequently annealed at 573 K. The annealedMoO3 films are then characterized… read more here.

Keywords: moo3; pld grown; nanostructured moo3; grown nanostructured ... See more keywords
Photo from archive.org

Change of the properties of nanostructured MoO3 thin films using gamma-ray irradiation

Sign Up to like & get
recommendations!
Published in 2018 at "Ceramics International"

DOI: 10.1016/j.ceramint.2018.04.040

Abstract: Abstract Thin films of Molybdenum trioxide (MoO 3 ) were deposited on glass substrates by the spray pyrolysis at 500 °C and the samples were then exposed to gamma γ radiation doses by 60 Co radioisotope… read more here.

Keywords: change properties; thin films; moo3 thin; irradiation ... See more keywords
Photo by nci from unsplash

Results on the microstructural, optical and electrochromic properties of spray-deposited MoO3 thin films by the influence of W doping

Sign Up to like & get
recommendations!
Published in 2019 at "Materials Science in Semiconductor Processing"

DOI: 10.1016/j.mssp.2019.104668

Abstract: Abstract Undoped and W-doped MoO3 thin films were prepared onto the glass and fluorine doped tin oxide coated glass substrates by the spray pyrolytic decomposition of molybdenum (V) chloride (MoCl5) precursor solution. X-ray diffraction analyses… read more here.

Keywords: moo3; thin films; results microstructural; moo3 thin ... See more keywords
Photo by qqq_saharok from unsplash

Hydrothermal temperature effect on the growth of h-MoO3 thin films using seed layers and their photoluminescence properties

Sign Up to like & get
recommendations!
Published in 2022 at "Materials Science in Semiconductor Processing"

DOI: 10.1016/j.mssp.2021.106243

Abstract: Abstract In this work, thin films of molybdenum trioxide were successfully deposited via the facile and cost-effective hydrothermal technique. The films were grown at different temperatures of 50, 80, 110, and 130 °C on glass substrates.… read more here.

Keywords: seed; thin films; moo3 thin; temperature ... See more keywords
Photo from wikipedia

Tunability of MoO3 Thin-Film Properties Due to Annealing in Situ Monitored by Hard X-ray Photoemission

Sign Up to like & get
recommendations!
Published in 2019 at "ACS Omega"

DOI: 10.1021/acsomega.9b01027

Abstract: The chemical and electronic structure of MoO3 thin films is monitored by synchrotron-based hard X-ray photoelectron spectroscopy while annealing from room temperature to 310 °C. Color-coded 2D intensity maps of the Mo 3d and O… read more here.

Keywords: hard ray; moo3 thin; moo3; film properties ... See more keywords
Photo by courtneywentz from unsplash

Effective medium theory to the description of plasmonic resonances: Role of Au and Ti nanoparticles embedded in MoO3 thin films

Sign Up to like & get
recommendations!
Published in 2020 at "Scientific Reports"

DOI: 10.1038/s41598-020-62706-4

Abstract: The growing interest in functional transition metal oxides for efficient energy consumption or in the bio-sensing process; indicates that is necessary to develop a new theoretical method that describes experiments. This article presents a new… read more here.

Keywords: modulation; moo3; medium theory; thin films ... See more keywords
Photo from wikipedia

Enhanced Room Temperature Ammonia Gas Sensing Properties of Fe-Doped MoO3 Thin Films Fabricated Using Nebulizer Spray Pyrolysis

Sign Up to like & get
recommendations!
Published in 2022 at "Nanomaterials"

DOI: 10.3390/nano12162797

Abstract: MoO3 thin films are fabricated using nebulizer spray pyrolysis technique, which is doped with Fe at various concentrations of 1, 2, 3, and 4% for ammonia gas sensors application at room temperature. X-ray diffraction (XRD)… read more here.

Keywords: gas sensing; gas; moo3 thin; doped moo3 ... See more keywords