Microstructure Optimization via Grain-Boundary Segregation to Enhance DC Bias Dielectric Performance of BaTiO3 Multilayer Ceramic Capacitors.
Sign Up to like & getrecommendations! Published in 2025 at "Advanced materials"
DOI: 10.1002/adma.202507233
Abstract: BaTiO₃‐based multilayer ceramic capacitors (MLCCs) are essential components in modern electronics. To enhance overall capacitance, achieving thinner ceramic layers has become a primary issue. However, this introduces two major challenges: controlling grain size during processing… read more here.
Keywords: multilayer ceramic; ceramic capacitors; optimization via; microstructure optimization ... See more keywords
Cold‐Sintered C0G Multilayer Ceramic Capacitors
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Electronic Materials"
DOI: 10.1002/aelm.201900025
Abstract: Multilayer ceramic capacitors (MLCCs) based on (Bi0.95Li0.05)(V0.9Mo0.1)O4‐Na2Mo2O7 (BLVMO‐NMO), with er = 39, temperature coefficient of capacitance, TCC ≈ ±0.01%, and tan δ = 0.01 at 1 MHz, are successfully fabricated by a cold‐sintering process at… read more here.
Keywords: ceramic capacitors; sintered c0g; c0g multilayer; multilayer ceramic ... See more keywords
Fully Printed Multilayer Ceramic Capacitors Based on High-k Perovskite Nanosheets.
Sign Up to like & getrecommendations! Published in 2024 at "Small"
DOI: 10.1002/smll.202404581
Abstract: Printing technology enables the integration of chemically exfoliated perovskite nanosheets into high-performance microcapacitors. Theoretically, the capacitance value can be further enhanced by designing and constructing multilayer structures without increasing the device size. Yet, issues such… read more here.
Keywords: high perovskite; multilayer ceramic; ceramic capacitors; multilayer ... See more keywords
Near-Zero Energy Dissipation Multilayer Ceramic Capacitors via Inhomogeneous Polarization Design.
Sign Up to like & getrecommendations! Published in 2025 at "Small"
DOI: 10.1002/smll.202501062
Abstract: Multilayer ceramic capacitors (MLCCs) demonstrate considerable potential for advance pulsed power systems, owing to their high-power density and fast charge/discharge capabilities. In light of the increasing demand for energy conservation, minimizing energy dissipation in storage… read more here.
Keywords: energy; energy dissipation; inhomogeneous polarization; multilayer ceramic ... See more keywords
Silane-treated BaTiO3 ceramic powders for multilayer ceramic capacitor with enhanced dielectric properties.
Sign Up to like & getrecommendations! Published in 2021 at "Chemosphere"
DOI: 10.1016/j.chemosphere.2021.131734
Abstract: Silane/ceramic combination provides the composites with several advantages from the advancements of new ceramic composite materials with good thermal conductivity, high mechanical and dielectric properties have wide significant applications in electrical and electronic industries. In… read more here.
Keywords: ceramic powder; batio3 ceramic; dielectric properties; multilayer ceramic ... See more keywords
Effects of dielectric thickness on energy storage properties of surface modified BaTiO3 multilayer ceramic capacitors
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152804
Abstract: Abstract Surface modified BaTiO3 were synthesized by coating BaTiO3 particles of 50/230 nm average grain size with 3 wt% Al2O3 and 1 wt% SiO2 (BTAS5/BTAS1). Multilayer ceramic capacitors (MLCC) were fabricated via two-steps sintering method. After sintering, average… read more here.
Keywords: ceramic capacitors; energy; surface modified; modified batio3 ... See more keywords
Synergistically achieving ultrahigh energy-storage density and efficiency in linear-like lead-based multilayer ceramic capacitor
Sign Up to like & getrecommendations! Published in 2021 at "Scripta Materialia"
DOI: 10.1016/j.scriptamat.2021.113723
Abstract: Abstract Although ceramic-based capacitors are indispensable component in advanced electrical systems, the recoverable energy-storage density (Wrec) is often not satisfied. Herein, (Pb0.92La0.02Ca0.06)(Zr0.6Sn0.4)0.995O3 (PLCZS) multilayer ceramic capacitor (MLCC) is fabricated via a tape-casting technique and its… read more here.
Keywords: energy storage; multilayer ceramic; density; storage density ... See more keywords
High energy-storage performance of PLZS antiferroelectric multilayer ceramic capacitors
Sign Up to like & getrecommendations! Published in 2020 at "Inorganic chemistry frontiers"
DOI: 10.1039/c9qi01416k
Abstract: Multilayer ceramic capacitors in energy-storage applications have received increasing attention due to the advantages of high power density, low drive voltage and fast charge/discharge rates. However, the low energy density is a great challenge which… read more here.
Keywords: ceramic capacitors; high energy; multilayer ceramic; energy storage ... See more keywords
High-temperature lead-free multilayer ceramic capacitors with ultrahigh energy density and efficiency fabricated via two-step sintering
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Chemistry A"
DOI: 10.1039/c9ta04317a
Abstract: A fast heating assisted two-step sintering method is developed to fabricate multilayer ceramic capacitors with ultrahigh energy-storage density and efficiency. read more here.
Keywords: two step; step sintering; multilayer ceramic; ceramic capacitors ... See more keywords
Parametric Design Studies of Multilayer Ceramic Capacitors for Enhanced Reliability Under Mechanical Stress in Electric Vehicles
Sign Up to like & getrecommendations! Published in 2025 at "IEEE Access"
DOI: 10.1109/access.2025.3554765
Abstract: Multilayer Ceramic Capacitors (MLCCs), composed of alternating layers of nickel electrodes and BaTiO3 dielectric, are critical electronic components in electric vehicles (EVs). This study focuses on optimizing MLCC design for EV applications by analyzing a… read more here.
Keywords: multilayer ceramic; mechanical stress; ceramic capacitors; electric vehicles ... See more keywords
Measurement Methodologies for Acoustic Noise Induced by Multilayer Ceramic Capacitors of Power Distribution Network in Mobile Systems
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Electromagnetic Compatibility"
DOI: 10.1109/temc.2020.2993850
Abstract: In this article, acoustic noise of printed circuit board (PCB) introduced by multilayer ceramic capacitors (MLCCs) on power distribution network (PDN) is studied. The correlation of PDN power rail noise, MLCCs and PCB dynamic characteristics,… read more here.
Keywords: vibration; acoustic noise; multilayer ceramic; power ... See more keywords