Study of the effect of hydrogen charging on the tensile properties and microstructure of four variant heat treatments of nickel alloy 718
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2017.02.149
Abstract: Abstract This study examined the hydrogen embrittlement sensitivity of nickel alloy 718 given four different heat treatments to obtain various microstructural states. The four heat treatments examined are the oil and gas 718 heat treatment,… read more here.
Keywords: heat treatment; hydrogen; heat treatments; nickel alloy ... See more keywords
Lubricating behavior of adaptive nickel alloy matrix composites with multiple solid lubricants from 25 °C to 700 ºC
Sign Up to like & getrecommendations! Published in 2017 at "Tribology International"
DOI: 10.1016/j.triboint.2016.12.030
Abstract: Abstract There is an increasing need to high temperature solid lubricant materials and techniques for moving system worked at high temperatures. In this study, the nickel alloy matrix composites with solid lubricants of Ag, CaF2… read more here.
Keywords: alloy matrix; nickel alloy; matrix composites; solid lubricants ... See more keywords
Low density magnetic silicate-nickel alloy composite hollow structures: seed induced direct assembly fabrication and catalytic properties
Sign Up to like & getrecommendations! Published in 2020 at "RSC Advances"
DOI: 10.1039/d0ra00893a
Abstract: An efficient seed induced direct assembly route is designed for the controlled synthesis of hollow microsphere supported catalysts (HMSCs) with nickel alloy as the active material. The inherent magnetic response of nickel alloy endows HMSCs… read more here.
Keywords: induced direct; direct assembly; seed induced; nickel alloy ... See more keywords
Inhibiters replacement of chilled water system in nuclear unit
Sign Up to like & getrecommendations! Published in 2017 at "Anti-corrosion Methods and Materials"
DOI: 10.1108/acmm-02-2016-1647
Abstract: Purpose The purpose of this paper was to study the corrosion control of B10 copper-nickel alloy using the LiOH-N2H4 compound inhibitors and to evaluate the feasibility of replacing the original inhibitors (NaNO2-Na2MoO4) with the new… read more here.
Keywords: copper nickel; lioh n2h4; nickel alloy; corrosion ... See more keywords
Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes
Sign Up to like & getrecommendations! Published in 2020 at "Surface Engineering and Applied Electrochemistry"
DOI: 10.3103/s1068375520040146
Abstract: Electroplating of zinc−nickel alloy coatings (3–16 at % Ni) on Type 17G1S-U steel from ammonium oxalate baths is studied. The effects that the ratio of alloy components has on the coating’s corrosion resistance and structure… read more here.
Keywords: alloy coatings; ammonium oxalate; zinc nickel; nickel alloy ... See more keywords
Mechanism underlying the acceleration of pitting corrosion of B30 copper–nickel alloy by Pseudomonas aeruginosa
Sign Up to like & getrecommendations! Published in 2023 at "Frontiers in Microbiology"
DOI: 10.3389/fmicb.2023.1149110
Abstract: Despite its excellent corrosion resistance, B30 copper–nickel alloy is prone to pitting, particularly when exposed to microorganisms. The mechanism underlying the acceleration of pitting in this alloy is not fully understood. In this study, the… read more here.
Keywords: b30 copper; copper; copper nickel; acceleration pitting ... See more keywords
Relationship between Pressure and Output Parameters in Belt Grinding of Steels and Nickel Alloy
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14164704
Abstract: Belt grinding of flat surfaces of typical parts made of steel and alloys, such as grooves, shoulders, ends, and long workpieces, is a good alternative to milling. Several factors can influence the belt grinding process… read more here.
Keywords: grinding steels; nickel alloy; belt grinding; pressure ... See more keywords
The Study of Radius End Mills with TiB2 Coating When Milling a Nickel Alloy
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16062535
Abstract: Nickel alloy high-speed processing technology using ball-end mills is characterized by high contact temperature and leads to accelerated tool wear. One of the effective ways to increase its reliability and service life is to modify… read more here.
Keywords: radius end; end mills; study radius; end ... See more keywords
STUDY OF NANOMODIFICATION OF NICKEL ALLOY GS3 WITH TITANIUM CARBIDE
Sign Up to like & getrecommendations! Published in 2023 at "Problems of Atomic Science and Technology"
DOI: 10.46813/2023-144-126
Abstract: The work deals with the fundamentals of nanomodification of the GS3 heat-resisting multicomponent nickel alloy, out of which blades for gas turbine engines are made. The selection of the modifier for the experimental alloy was… read more here.
Keywords: gs3; titanium carbide; nickel alloy; alloy ... See more keywords
Optimization of the Double Loop Electrochemical Potentiokinetic Reactivation Method for Detecting Sensitization of Nickel Alloy 690
Sign Up to like & getrecommendations! Published in 2018 at "Corrosion"
DOI: 10.5006/2562
Abstract: Nickel alloy 690 (UNS N06690) is one of the current choices for nuclear power plant steam generator tubing. The severity of certain stress corrosion cracking submodes in Ni-Cr-Fe alloys, such as Al... read more here.
Keywords: loop electrochemical; double loop; alloy 690; nickel alloy ... See more keywords