Study of poly (sodium-4-styrenesulfonate) behavior in water/non-solvent mixtures by conductivity and refractive index measurements
Sign Up to like & getrecommendations! Published in 2017 at "Colloid and Polymer Science"
DOI: 10.1007/s00396-017-4104-y
Abstract: In this research paper, we intend to describe some characteristics and properties of polyelectrolyte as well as its specific behavior in mixed media. We have studied the behavior of poly (sodium-4-styrenesulfonate) (PSS) in water/ethanol media… read more here.
Keywords: sodium styrenesulfonate; water; poly sodium; conductivity refractive ... See more keywords
Modulation of the mechanical, physical and chemical properties of polyvinylidene fluoride scaffold via non-solvent induced phase separation process for nerve tissue engineering applications
Sign Up to like & getrecommendations! Published in 2018 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2018.05.004
Abstract: Abstract The aim of this research was to develop microporous poly(vinylidene fluoride) (PVDF) scaffolds with an intrinsic electrical property, via the combination of non-solvent induced phase separation (NIPS) and thermal induced phase separation (TIPS) process… read more here.
Keywords: phase separation; coagulation bath; induced phase; non solvent ... See more keywords
Preparation of hydrophilic polyvinylidene fluoride/polyvinyl alcohol ultrafiltration membrane via polymer/non-solvent co-induced phase separation method towards enhance anti-fouling performance
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Environmental Chemical Engineering"
DOI: 10.1016/j.jece.2021.106431
Abstract: Abstract Membrane separation is a common water treatment technology, but the problem of membrane fouling should not be ignored. Hydrophilic modification is an effective method to reduce membrane fouling. Therefore, PVA/non-solvent co-induced phase separation method… read more here.
Keywords: phase separation; polymer; method; non solvent ... See more keywords
Effect of bimodal pores on sintering and residual stresses of YSZ membranes prepared by non-solvent induced phase separation method
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2018.12.037
Abstract: Abstract Densification mismatch and residual stresses of tri-layered yttria-stabilized zirconia (YSZ) membranes prepared by a non-solvent induced phase separation (NIPS) method were investigated. The tri-layered membrane consisted of sponge-like structures and finger-like voids in macroscale.… read more here.
Keywords: membranes prepared; ysz membranes; non solvent; solvent induced ... See more keywords
Polyhydroxyalkanoate (PHA) based microfiltration membranes: Tailoring the structure by the non-solvent induced phase separation (NIPS) process
Sign Up to like & getrecommendations! Published in 2020 at "Polymer"
DOI: 10.1016/j.polymer.2020.122813
Abstract: Abstract Within the purpose of developing more sustainable membrane systems, it is herein proposed to implement a biobased and biodegradable material, the poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV), to replace conventional polymers in a commonly used membrane fabrication process.… read more here.
Keywords: phase separation; induced phase; non solvent; process ... See more keywords
Facile Fabrication of Porous Conductive Thermoplastic Polyurethane Nanocomposite Films via Solution Casting
Sign Up to like & getrecommendations! Published in 2017 at "Scientific Reports"
DOI: 10.1038/s41598-017-17647-w
Abstract: Porous conductive polymers are one of important materials, featuring lightweight, large specific surface area and high porosity. Non-solvent induced phase separation is widely employed to prepare porous polymer sheet materials. Through utilizing water vapor in… read more here.
Keywords: porous conductive; solution casting; thermoplastic polyurethane; non solvent ... See more keywords
Hierarchically Porous Cellulose Monolith Prepared by Combination of Ice-template Method and Non-solvent-induced Phase Separation Method
Sign Up to like & getrecommendations! Published in 2017 at "Chemistry Letters"
DOI: 10.1246/cl.170155
Abstract: Hierarchically cellulose monoliths were successfully prepared by non-solvent-induced phase separation (NIPS) without any template. Phase separation was induced by adding ethyl acetate into a cellulose/LiCl-DMAc system. The obtained cellulose monolith with a surface area of… read more here.
Keywords: cellulose monolith; phase separation; non solvent; method ... See more keywords
Non-Solvent Synthesis of a Robust Potassium-Doped PdCu-Pd-Cu@C Nanocatalyst for High Selectively Tandem Reactions
Sign Up to like & getrecommendations! Published in 2021 at "Catalysts"
DOI: 10.3390/catal11101191
Abstract: A non-solvent synthesis of alkali metal-doped PdCu-Pd-Cu@C is presented that needs no mechanical grinding and utilizes heat treatment under an N2 gas flow. Pluronic® F127 is used to generate pores and a high surface area,… read more here.
Keywords: non solvent; doped pdcu; pdcu nanocatalyst; solvent synthesis ... See more keywords
The Effect of Non-Solvent Nature on the Rheological Properties of Cellulose Solution in Diluted Ionic Liquid and Performance of Nanofiltration Membranes
Sign Up to like & getrecommendations! Published in 2023 at "International Journal of Molecular Sciences"
DOI: 10.3390/ijms24098057
Abstract: The weak point of ionic liquids is their high viscosity, limiting the maximum polymer concentration in the forming solutions. A low-viscous co-solvent can reduce viscosity, but cellulose has none. This study demonstrates that dimethyl sulfoxide… read more here.
Keywords: non solvent; cellulose solution; ionic liquid; diluted ionic ... See more keywords
Non-Solvent Induced Phase Separation (NIPS) for Fabricating High Filtration Efficiency (FE) Polymeric Membranes for Face Mask and Air Filtration Applications
Sign Up to like & getrecommendations! Published in 2022 at "Membranes"
DOI: 10.3390/membranes12070637
Abstract: Protection against airborne viruses has become very relevant since the outbreak of SARS-CoV-2. Nonwoven face masks along with heating, ventilation, and air conditioning (HVAC) filters have been used extensively to reduce infection rates; however, some… read more here.
Keywords: non solvent; filtration efficiency; air; solvent induced ... See more keywords
Effect of Polymer Dissolution Temperature and Conditioning Time on the Morphological and Physicochemical Characteristics of Poly(Vinylidene Fluoride) Membranes Prepared by Non-Solvent Induced Phase Separation
Sign Up to like & getrecommendations! Published in 2021 at "Polymers"
DOI: 10.3390/polym13234062
Abstract: This work reports on the production of poly(vinylidene fluoride) (PVDF) membranes by non-solvent induced phase separation (NIPS) using N,N-dimethylformamide (DMF) as solvent and water as non-solvent. The influence of the processing conditions in the morphology,… read more here.
Keywords: conditioning time; polymer dissolution; non solvent;