Towards Effective Characterization of the Normal Force Curve in Transverse Galloping
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Sound and Vibration"
DOI: 10.1016/j.jsv.2020.115772
Abstract: Abstract The past decade has witnessed a renewed interest in studying the fundamentals of galloping due to the emergence of new engineering applications were this aeroelastic instability is intentionally activated and utilized. One interesting problem… read more here.
Keywords: normal force; effective characterization; force; bluff body ... See more keywords
Fretting wear of a nitrided 316L/304L contact subject to in-phase normal force fluctuation in dry and lithium-boron solution: An R P -friction energy wear approach
Sign Up to like & getrecommendations! Published in 2017 at "Wear"
DOI: 10.1016/j.wear.2017.01.075
Abstract: Abstract In nuclear power plants, tubes of the rod cluster control assemblies undergo impacts at low contact pressures against guides, causing specific wear on the contact surfaces. The present study investigates fretting wear behavior under… read more here.
Keywords: friction; normal force; fretting wear; force ... See more keywords
Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”
Sign Up to like & getrecommendations! Published in 2021 at "Wear"
DOI: 10.1016/j.wear.2021.203664
Abstract: Abstract In industrial applications, tools of H10 tool-steel used in mechanical and metallurgical manufacturing processes, such as rolling, extrusion, forging, sheet metal stamping, milling and turning, frequently present significant levels of micro-abrasive wear, which occurs… read more here.
Keywords: steel; abrasive wear; normal force; micro abrasive ... See more keywords
Strain Stiffening and Negative Normal Force of Agarose Hydrogels
Sign Up to like & getrecommendations! Published in 2020 at "Macromolecules"
DOI: 10.1021/acs.macromol.0c00601
Abstract: Inspired by the specific strain stiffening and negative normal force phenomena in several biological networks, herein, we show strain stiffening and negative normal force in agarose hydrogels. We use both pre-strain and strain amplitude sweep… read more here.
Keywords: normal force; strain stiffening; stiffening negative; negative normal ... See more keywords
A Soft Barometric Tactile Sensor to Simultaneously Localize Contact and Estimate Normal Force With Validation to Detect Slip in a Robotic Gripper
Sign Up to like & getrecommendations! Published in 2022 at "IEEE Robotics and Automation Letters"
DOI: 10.1109/lra.2022.3205768
Abstract: Soft tactile sensing technologies provide the potential to endow a sense of touch to robots for grasping and manipulating objects. During the execution of such tasks, having accurate knowledge on the contact location and quantitative… read more here.
Keywords: tactile sensor; detect slip; force; normal force ... See more keywords
Loss Minimization Control Strategy for Linear Induction Machine in Urban Transit Considering Normal Force
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/tia.2018.2873575
Abstract: Linear induction machine (LIM) in urban transit suffers greatly from poor efficiency due to the large air-gap length and the end-effects, including both transversal edge- and longitudinal end-effects caused by the cut-open magnetic circuit and… read more here.
Keywords: normal force; loss; force; induction machine ... See more keywords
Flux Characteristics Analysis of a Double-Sided Switched Reluctance Linear Machine Under the Asymmetric Air Gap
Sign Up to like & getrecommendations! Published in 2018 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2018.2807407
Abstract: This paper analyzes the flux characteristics and normal force of the double-sided switched reluctance linear machine (SRLM) under the asymmetric air gap. The magnetic equivalent circuit (MEC) of the machine and the details of the… read more here.
Keywords: normal force; force; asymmetric air; air gap ... See more keywords
Wearable MMG-Plus-One Armband: Evaluation of Normal Force on Mechanomyography (MMG) to Enhance Human-Machine Interfacing
Sign Up to like & getrecommendations! Published in 2021 at "IEEE Transactions on Neural Systems and Rehabilitation Engineering"
DOI: 10.1109/tnsre.2020.3043368
Abstract: In this paper, we introduce a new mode of mechanomyography (MMG) signal capture for enhancing the performance of human-machine interfaces (HMIs) through modulation of normal pressure at the sensor location. Utilizing this novel approach, increased… read more here.
Keywords: mechanomyography mmg; normal force; machine; human machine ... See more keywords
Highly efficient traction drive system with a normal force controller using a piezoelectric actuator
Sign Up to like & getrecommendations! Published in 2017 at "Advances in Mechanical Engineering"
DOI: 10.1177/1687814017728836
Abstract: Traction drive is a useful power transmission method for reducing noise of high-rotational-speed motors of electric vehicles. To realize a highly efficient traction drive system, normal force between rollers must be optimized. This study uses… read more here.
Keywords: normal force; piezoelectric actuator; force; traction drive ... See more keywords
Effects of Normal Force on the Tribocorrosion Behavior of a Nickel-Based Superalloy in Alkaline Solution: An Electrochemical Study
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13183959
Abstract: The tribocorrosion behavior of Inconel 690TT in NaOH (pH = 9.8) solution at different normal forces was investigated by an electrochemical method. The results indicated that normal force had a great effect on the tribocorrosion… read more here.
Keywords: normal force; passive film; force; tribocorrosion behavior ... See more keywords
Validation of Nonlinear Dependence of Rolling Friction Moment on the Normal Force for Elastic Materials
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15072518
Abstract: Analogous to the Amonton–Coulomb relation, which states the linear dependency between the dynamic sliding friction and the normal reaction, the rolling friction moment is commonly accepted as proportional to the normal reaction in a concentrated… read more here.
Keywords: normal force; rolling friction; rotor; moment ... See more keywords