Novel 3D printed universal conical holder for eye plaque quality assurance
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Clinical Medical Physics"
DOI: 10.1002/acm2.14395
Abstract: PURPOSE For the custom-built construction of eye plaques, the iodine (I-125) seeds of different source strengths are recycled in our eye plaque program. To return I-125 seeds to the correct lot, we developed a novel… read more here.
Keywords: seed; holder; plaque; eye plaque ... See more keywords
Assessing the reproducibility of CBCT-derived radiomics features using a novel 3D-printed phantom.
Sign Up to like & getrecommendations! Published in 2021 at "Medical physics"
DOI: 10.1002/mp.15043
Abstract: PURPOSE Radiomics modelling is an exciting avenue for enhancing clinical decision-making and personalized treatment. Radiation oncology patients often undergo routine imaging for position verification, particularly using LINAC-mounted cone-beam computed tomography (CBCT). The wealth of imaging… read more here.
Keywords: novel printed; feature; reproducibility; printed phantom ... See more keywords
Novel 3D printed alginate–BFP1 hybrid scaffolds for enhanced bone regeneration
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Industrial and Engineering Chemistry"
DOI: 10.1016/j.jiec.2016.09.003
Abstract: Abstract In this research, novel 3D printed alginate–peptide hybrid scaffolds were explored for enhanced bone regeneration. Bone formation peptide-1 (BFP1) was loaded into the scaffolds to promote bone regeneration. The alginate–BFP1 conjugates were synthesized via… read more here.
Keywords: novel printed; bone regeneration; bone; enhanced bone ... See more keywords
A novel 3D-printed multi-driven system for large-scale neurophysiological recordings in multiple brain regions
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Neuroscience Methods"
DOI: 10.1016/j.jneumeth.2021.109286
Abstract: BACKGROUND Electrical probes have been widely used for recording single-unit spike activity and local field potentials (LFPs) in brain regions. However, setting up an easily-assembled large-scale recording in multiple brain regions for long-term and stable… read more here.
Keywords: large scale; multiple brain; novel printed; system ... See more keywords
A novel printed monopole antenna with folded-line SIR loading
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Electromagnetic Waves and Applications"
DOI: 10.1080/09205071.2021.1872422
Abstract: A novel printed monopole antenna with simple, low-profile and convenient design is presented in this paper. The antenna composes of a printed monopole antenna and a folded-line stepped impedance resonator (SIR) loaded on the bottom… read more here.
Keywords: novel printed; printed monopole; folded line; antenna ... See more keywords
A novel printed small antenna with L-shaped structure for multiband applications
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Instrumentation"
DOI: 10.1088/1748-0221/13/08/p08016
Abstract: This paper introduces a novel L-Shaped microstrip patch antenna for multiband applications. The multiband antenna includes several L-shaped strips; each of these strips create new resonance frequency. The reported antenna is proposed for Bluetooth, wireless… read more here.
Keywords: novel printed; multiband applications; small antenna; antenna ... See more keywords
A Novel 3D-Printed Gravity-Independent Air-Eliminating Filter for Rapid Intravenous Infusions.
Sign Up to like & getrecommendations! Published in 2024 at "Aerospace medicine and human performance"
DOI: 10.3357/amhp.6376.2024
Abstract: INTRODUCTION: The absence of a consistent downward G vector can make separation of gases from liquids challenging, such as in field medicine without stable upright equipment or during spaceflight. This limits the use of medical… read more here.
Keywords: eliminating filter; printed gravity; air; air eliminating ... See more keywords
Performance Characteristics of a Novel 3D-Printed Bubble Intermittent Mandatory Ventilator (B-IMV) for Adult Pulmonary Support
Sign Up to like & getrecommendations! Published in 2022 at "Bioengineering"
DOI: 10.3390/bioengineering9040151
Abstract: The COVID-19 pandemic has brought attention to the need for developing effective respiratory support that can be rapidly implemented during critical surge capacity scenarios in healthcare settings. Lung support with bubble continuous positive airway pressure… read more here.
Keywords: adult; intermittent mandatory; novel printed; support ... See more keywords
Mechanical Properties of Novel 3D-Printed Restorative Materials for Definitive Dental Applications
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18204662
Abstract: The aim of this study is to evaluate the mechanical properties and long-term stability of 3D-printable resins for permanent fixed dental prostheses (FDPs), focusing on whether material performance is influenced by 3D-printer type or by… read more here.
Keywords: mechanical properties; calc; modulus; properties novel ... See more keywords
Novel 3D-Printed Dressings of Chitosan–Vanillin-Modified Chitosan Blends Loaded with Fluticasone Propionate for Treatment of Atopic Dermatitis
Sign Up to like & getrecommendations! Published in 2022 at "Pharmaceutics"
DOI: 10.3390/pharmaceutics14091966
Abstract: In the present study, the blends of CS and Vanillin–CS derivative (VACS) were utilized for the preparation of printable inks for their application in three-dimensional (3D) printing procedures. Despite the synergic interaction between the blends,… read more here.
Keywords: novel printed; vacs; dressings chitosan; fluticasone propionate ... See more keywords
Evaluating a Novel 3D-Printed Resin for Dental Restorations: Fracture Resistance of Restorations Fabricated by Digital Press Stereolithography
Sign Up to like & getrecommendations! Published in 2025 at "Polymers"
DOI: 10.3390/polym17172322
Abstract: An in vitro study evaluated the fracture resistance of four CAD/CAM restorative materials: lithium disilicate ceramic (IPS e.max CAD, EM), hybrid ceramic (Vita Enamic, VE), a polymer-based composite (Cerasmart, CS), and a novel 3D-printed resin… read more here.
Keywords: printed resin; resistance; fracture resistance; press stereolithography ... See more keywords