Sign Up to like & get
recommendations!
0
Published in 2019 at "Additive Manufacturing"
DOI: 10.1016/j.addma.2019.05.034
Abstract: Abstract The optimization of slurry compositions and processing parameters has significant potential for layered extrusion forming, a novel slurry-based additive manufacturing method. The optimal slurry composition was composed of 50vol.% Al2O3 loading, 1.5wt.% acetic acid…
read more here.
Keywords:
extrusion forming;
nozzle diameter;
printing highly;
highly loaded ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Fuel"
DOI: 10.1016/j.fuel.2020.119887
Abstract: Abstract Numerical simulations are performed to investigate the effects of ambient density ( ρ am ) and nozzle diameter ( D noz ) on the ignition characteristic of diesel spray combustion under engine-like conditions. A…
read more here.
Keywords:
diesel spray;
nozzle diameter;
effects ambient;
fuel ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of pharmaceutical sciences"
DOI: 10.1016/j.xphs.2017.12.001
Abstract: Needle-free injection (NFI), as an alternative drug delivery strategy, owns great potential. It is able to reduce complaints about needle phobia and avoid the occurring of accidental needle stick injuries. The nozzle diameter is inherently…
read more here.
Keywords:
needle free;
mathematical model;
nozzle diameter;
injection ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Surface Engineering and Applied Electrochemistry"
DOI: 10.3103/s1068375521010154
Abstract: Abstract The bubbles of water jet cavitation and of multifunction cavitation (MFC) generated by nozzles with diameters of 0.1, 0.2 and 0.8 mm were investigated for the collapse pressure of microjets, the nozzle-specimen distance, the…
read more here.
Keywords:
diameter;
water jet;
nozzle diameter;
multifunction cavitation ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2022 at "Polymers"
DOI: 10.3390/polym14020356
Abstract: The dynamic growth of the use of polymer construction parts manufactured individually and in a small series makes it necessary to improve additive methods in the areas of materials, equipment and processes. By observing selected…
read more here.
Keywords:
influence extruder;
diameter improvement;
extruder nozzle;
mechanical properties ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2022 at "Polymers"
DOI: 10.3390/polym14193958
Abstract: Samples in the form of cylindrical plates, additively manufactured using the fused deposition modelling (or filament freeform fabrication, FDM/FFF) technology from polylactide (PLA), polyethylene terephthalate glycol (PETG) and polyetheretherketone (PEEK), were studied in series of…
read more here.
Keywords:
peek;
adhesion;
nozzle diameter;
bone marrow ... See more keywords