Piezoelectric Nylon‐11 Fibers for Electronic Textiles, Energy Harvesting and Sensing
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202004326
Abstract: Electronic textiles and functional fabrics are among the key constituents envisioned for wearable electronics applications. For e‐textiles, the challenge is to process materials of desired electronic properties such as piezoelectricity into fibers to be integrated… read more here.
Keywords: nylon; piezoelectric nylon; electronic textiles; nylon fibers ... See more keywords
High Lightfastness Acid Dyes Synthesized from Corresponding Anthraquinone Chromophore Utilizing a Sulfonation Reaction Part 2: Dyeing Properties on Polyamide and m-Aramid Fibers and Fastness
Sign Up to like & getrecommendations! Published in 2019 at "Fibers and Polymers"
DOI: 10.1007/s12221-019-8105-y
Abstract: This study aimed at investigating the dyeability of synthesized acid dyes on fine nylon and m-aramid and their light fastness. A sulfonic acid group was introduced into the corresponding hydrophobic dye, which has an anthraquinone… read more here.
Keywords: acid dyes; aramid; fine nylon; anthraquinone ... See more keywords
Influence of hybrid graphene oxide-carbon nanotube as a nano-filler on the interfacial interaction in nylon composites prepared by in situ interfacial polymerization
Sign Up to like & getrecommendations! Published in 2018 at "Carbon"
DOI: 10.1016/j.carbon.2018.08.041
Abstract: Abstract Nylon 6,6 nanocomposites containing well-dispersed graphene oxide (GO) and carbon nanotubes (CNTs) were successfully fabricated via in situ interfacial polymerization between two immiscible phases: organic phase assisted by poly(vinylpyrrolidone, PVP) surfactant containing adipoyl chloride… read more here.
Keywords: graphene oxide; polymerization; carbon; interfacial interaction ... See more keywords
Axial crushing of Nylon and Al/Nylon hybrid tubes by FDM 3D printing
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.113055
Abstract: Abstract Fused Deposition Modeling (FDM), as one of the most popular 3D printing methods, has shown great potential in manufacturing customized safety components. However, the materials made by 3D printing show different mechanical properties in… read more here.
Keywords: axial crushing; energy absorption; nylon hybrid; hybrid tubes ... See more keywords
Additive manufacturing of anisotropic hybrid NdFeB-SmFeN nylon composite bonded magnets
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2018.07.021
Abstract: Abstract In this work, we demonstrate a novel method of extrusion-based 3D printing additive manufacturing of bonded magnets comprising 65 vol% anisotropic composite powders of Dy-free magfine Nd-Fe-B and Sm-Fe-N in nylon. The 3D printing was… read more here.
Keywords: composite bonded; anisotropic; additive manufacturing; bonded magnets ... See more keywords
Continuum-DFT multiscale model to investigate linear/nonlinear anisotropic mechanical characterization of crystal phase of nylon-6, 6
Sign Up to like & getrecommendations! Published in 2018 at "Mechanics of Materials"
DOI: 10.1016/j.mechmat.2017.11.010
Abstract: Abstract In this paper, dispersion corrected density functional theory (DFT-D) is performed on the α-crystal phase of nylon-6, 6 as a reference case for comparison in order to develop a continuum-DFT model. The DFT-D model… read more here.
Keywords: anisotropic mechanical; model; nonlinear anisotropic; crystal phase ... See more keywords
Engineering Crystal Phase of Nylon-11 Films for Ferroelectric Device and Piezoelectric Sensor
Sign Up to like & getrecommendations! Published in 2021 at "Nano Energy"
DOI: 10.1016/j.nanoen.2021.106244
Abstract: Abstract Among non-fluorinated ferroelectric polymers, odd number Nylons have recently attracted attention because of their solution-processibility and decent ferroelectric characteristics. Here, we demonstrate a ferroelectric and piezoelectric Nylon-11 δ` phase crystal film manufactured via a… read more here.
Keywords: subsequent melt; melt quenching; engineering crystal; nylon ... See more keywords
A Bio-derived Char Forming Flame Retardant Additive for Nylon 6 Based on Crosslinked Tannic Acid
Sign Up to like & getrecommendations! Published in 2020 at "Thermochimica Acta"
DOI: 10.1016/j.tca.2020.178750
Abstract: Abstract Nylon is one of the most important engineering polymers used in textile, electronics, and automotive applications. In addition to good mechanical properties, flame retardancy is desirable in these applications. Nylon is typically processed at… read more here.
Keywords: flame retardant; tannic acid; char forming; additive nylon ... See more keywords
Ultraflexible and High-Thermoelectric-Performance Sulfur-Doped Ag2Se Film on Nylon for Power Generators.
Sign Up to like & getrecommendations! Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.1c21701
Abstract: In this work, we developed a facile method to fabricate low-cost, flexible, and high-thermoelectric-performance n-type Ag2Se1-xSx@(Ag2S1-ySey/S) composite film on a nylon membrane. The composite film was prepared by first performing wet-chemical synthesis of the S-doped… read more here.
Keywords: high thermoelectric; nylon; power; film ... See more keywords
Redesigned Hybrid Nylons with Optical Clarity and Chemical Recyclability.
Sign Up to like & getrecommendations! Published in 2022 at "Journal of the American Chemical Society"
DOI: 10.1021/jacs.1c12611
Abstract: Aliphatic polyamides, or nylons, are typically highly crystalline and thermally robust polymers used in high-performance applications. Nylon 6, a high-ceiling-temperature (HCT) polyamide from ε-caprolactam, lacks expedient chemical recyclability, while low-ceiling temperature (LCT) nylon 4 from… read more here.
Keywords: optical clarity; nylon; recyclability; chemical recyclability ... See more keywords
Synthesis of nylon 1 in supercritical carbon dioxide and its crystallization behavior effect on nylon 11
Sign Up to like & getrecommendations! Published in 2018 at "CrystEngComm"
DOI: 10.1039/c8ce00821c
Abstract: Nylon 1 (PA1), with the highest density of hydrogen bonds and dipoles among odd-numbered nylons, was synthesized in supercritical carbon dioxide using urea as the raw material. In this method, CO2 not only played the… read more here.
Keywords: behavior effect; crystallization; supercritical carbon; carbon dioxide ... See more keywords