Manufacturing Oxide Dispersion-Strengthened (ODS) Steel Fuel Cladding Tubes Using the Cold Spray Process
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03582-w
Abstract: AbstractThe cold spray materials deposition process has been investigated for manufacturing oxide dispersion-strengthened (ODS) steel fuel cladding tubes. Gas-atomized 14YWT ODS steel powder was used as the feedstock material. A parametric investigation of the cold… read more here.
Keywords: cold spray; spray process; ods steel; steel ... See more keywords
Effect of silicon on oxidation behavior of 9Cr-ODS steel at 650 °C
Sign Up to like & getrecommendations! Published in 2021 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2021.112384
Abstract: Abstract The effect of silicon content on the evolution of oxide layer and oxides in Si-containing 9Cr-ODS steel during 5, 20 and 50 h oxidation was studied. The experiment was carried out at 650 °C… read more here.
Keywords: steel; oxide layer; effect silicon; ods steel ... See more keywords
Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2017.02.021
Abstract: Abstract Ultra-high temperature ring tensile tests were performed to investigate the tensile behavior of oxide dispersion strengthened (ODS) steel claddings and wrapper materials under severe accident conditions with temperatures ranging from room temperature to 1400 °C… read more here.
Keywords: ods steel; steel claddings; high temperature; ultra high ... See more keywords
A study on the corrosion and stress corrosion cracking susceptibility of 310-ODS steel in supercritical water
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2018.11.016
Abstract: Abstract General corrosion and stress corrosion cracking (SCC) susceptibility of an oxide dispersion strengthened (ODS) austenitic 310 (310-ODS) steel in supercritical water (SCW) are studied by weight gain and slow strain rate tensile (SSRT) testing,… read more here.
Keywords: ods steel; supercritical water; 310 ods; susceptibility ... See more keywords
Microstructure and electronic structure of Cr2C and Fe2Y in the Cr-coating prepared by pack-cementation on the surface of ODS steel
Sign Up to like & getrecommendations! Published in 2021 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2021.102591
Abstract: Abstract In this study, a combination of experimental characterization and first-principles calculation was employed to systematically study the structure and electronic properties of Cr-coating prepared on the surface of oxide dispersion strengthened (ODS) steel by… read more here.
Keywords: ods steel; coating prepared; cr2c fe2y; fe2y ... See more keywords
Fabrication routes for advanced first wall design alternatives
Sign Up to like & getrecommendations! Published in 2021 at "Nuclear Fusion"
DOI: 10.1088/1741-4326/ac2523
Abstract: In future nuclear fusion reactors, plasma facing components have to sustain specific neutron damage. While the majority of irradiation data provides a relatively clear picture of the displacement damage, the effect of helium transmutation is… read more here.
Keywords: design; first wall; heat; ods steel ... See more keywords
Formation and Microstructural Evolution of Ferritic ODS Steel Powders during Mechanical Alloying
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16020765
Abstract: Ferritic ODS steel elemental powder compositions with various Zr content (0.3–1.0 wt.%), ground in a Pulverisette 6 planetary ball mill, were extensively studied by X-ray diffraction line profile analysis, microscopic observations, microhardness testing and particle… read more here.
Keywords: ferritic ods; evolution ferritic; formation microstructural; ods steel ... See more keywords
Characterization of 14Cr ODS Steel Fabricated by Spark Plasma Sintering
Sign Up to like & getrecommendations! Published in 2019 at "Metals"
DOI: 10.3390/met9020200
Abstract: : Oxide Dispersion Strengthened (ODS) steel with a composition of Fe-14Cr-2W-0.2V-0.07Ta-1Al-0.3Y2O3 was fabricated by mechanical alloying (MA) and spark plasma sintering (SPS). All of the investigations were performed on the as-SPSed ODS sample without further… read more here.
Keywords: ods steel; ods sample; steel; plasma sintering ... See more keywords
EFFECT OF GRAIN BOUNDARY ON THE CAVITY FORMATION BEHAVIOR IN 1.4 MeV Ar+ IRRADIATED 18Cr10NiTi-ODS STEEL
Sign Up to like & getrecommendations! Published in 2023 at "Problems of Atomic Science and Technology"
DOI: 10.46813/2023-144-015
Abstract: The formation of cavity denuded zones (DZ) near grain boundary (GB) in 18Cr10NiTi-ODS steel with the addition of Y2O3-ZrO2 nano-oxides irradiated with energetic Ar-ions in the dose range of 40…110 displacements per atom (dpa) with… read more here.
Keywords: cavity; grain boundary; formation; ods steel ... See more keywords