Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three‐Step Thermal Oxidation Process
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100864
Abstract: Thermal oxidation is a promising technique to improve the tribological properties of Ti6Al4V. Herein, a single‐step process consisting of oxidation in air, a two‐step process with an additional solid‐state oxide layer reduction step under vacuum,… read more here.
Keywords: oxide layer; three step; oxidation; process ... See more keywords
High‐Temperature Oxidation Behavior of Hastelloy N Alloy for Molten Salt Reactor at 650–980 °C
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202400699
Abstract: Isothermal oxidation of Hastelloy N, a nickel‐based superalloy with low Cr content, is conducted at 650–980 °C in air. The oxide film exhibits a complex structure with outer and inner oxide layers. The outer oxide layer… read more here.
Keywords: oxide layer; behavior hastelloy; 650 980; alloy ... See more keywords
Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202401322
Abstract: Magnesium alloys pose challenges in additive manufacturing, due to the difference between the melting temperature of magnesium oxide (2825 °C) on the powder particles and the boiling point of metallic magnesium (1093 °C). A promising approach to… read more here.
Keywords: layer thickness; magnesium; oxide layer; magnesium alloys ... See more keywords
Effect of Molecular Weight of Poly(Acrylic Acid) as an Activator on Cu Sintering Performances
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.57200
Abstract: Sintering refers to a process in which powdered materials are heated at high temperatures to form a solid mass. The process involves heating below the melting point to enhance strength and density and create electrical… read more here.
Keywords: poly acrylic; oxide layer; electrical conductivity; acrylic acid ... See more keywords
Growth Law of Solid‐State Decarburization Oxide Layer of Fe–C–Si Alloy Under CO2–CO Atmosphere
Sign Up to like & getrecommendations! Published in 2025 at "steel research international"
DOI: 10.1002/srin.202400937
Abstract: The experiment is carried out on a 0.5 mm Fe‐0.1C‐3.5Si silicon steel. Solid‐state decarburization tests are carried out under CO2–CO/H2O–H2 atmosphere to analyze the evolution of the oxide layer in the decarburization process under different atmospheric… read more here.
Keywords: oxide layer; decarburization; state decarburization; thickness oxide ... See more keywords
Characterization of nanotubular oxide layer grown on Ti14wt.%Nb alloy by anodization and its performance in photoelectrocatalytic process
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Solid State Electrochemistry"
DOI: 10.1007/s10008-020-04663-6
Abstract: The development and application of well-organized nanostructured materials with high absorption on visible light for application in photoelectrodegradation of polluting organic compounds are challenging problems. This paper presents the formation of nanotubular oxides grown on… read more here.
Keywords: oxide layer; ti14wt alloy; process; layer grown ... See more keywords
Mechanical Properties and Structure of Titanium-Alloy Overlays Alloyed With Oxygen from the Oxide Layer of Filler Rods
Sign Up to like & getrecommendations! Published in 2020 at "Metal Science and Heat Treatment"
DOI: 10.1007/s11041-020-00596-z
Abstract: Prospects of oxygen alloying of alloys in the process of deposition of rods on parts from titanium alloys aimed at raising their hardness are considered. Experiments on fabrication of samples of titanium alloys with remelting… read more here.
Keywords: oxide layer; oxygen oxide; titanium; filler rods ... See more keywords
The Mechanism Behind the Oxidation Protection of High Mg Al Alloys with Beryllium
Sign Up to like & getrecommendations! Published in 2018 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-018-1340-6
Abstract: The addition of beryllium to Al-Mg alloys is known to cause a dramatic decrease in oxidation; however, the mechanism behind this protective effect is not yet fully understood. To aid in finding an alternative to… read more here.
Keywords: oxidation; behind oxidation; oxide layer; mechanism behind ... See more keywords
Research on Remaining Life Evaluation Method of T92 Steel for Superheater Tube Based on Oxide Layer Growth
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-019-00662-6
Abstract: T92 steel is widely used in high-temperature superheater of supercritical power station boiler, and the researches on its remaining life have always been the hot spot of scholars around the world. In this paper, based… read more here.
Keywords: tube; oxide layer; t92 steel; life ... See more keywords
Emissivity Model of Aluminum 7075 During the Growth of Oxide Layer Over the Temperature Range from 800 to 910 K at a Wavelength of 1.5 μm
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-017-1239-y
Abstract: The emissivity models of aluminum 7075 were studied during the growth of oxide layer over the temperature range from 800 to 910 K at a wavelength of 1.5 μm. In the experiment, the samples were heated… read more here.
Keywords: oxide layer; emissivity; temperature; growth oxide ... See more keywords
Effect of Ti addition on high-temperature oxidation behavior of Co–Ni-based superalloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-020-00379-z
Abstract: The oxidation behavior of a newly designed Co–Ni-based alloy with varied addition of Ti (1.4 and 2.1 wt.%, hereafter referred as 1.4Ti and 2.1Ti alloys) was explored in air at 900 °C. It is found that an… read more here.
Keywords: oxidation; addition; high temperature; oxide layer ... See more keywords