Articles with "oxygen plasma" as a keyword



Photo from wikipedia

The optimization of contact interface between metal/MoS2 FETs by oxygen plasma treatment

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Materials Science: Materials in Electronics"

DOI: 10.1007/s10854-020-03511-7

Abstract: The quality of the contact is key for the performance enhancement of the MoS2 device. As the oxygen plasma treatment is developed in the fabrication of MoS2 field effect transistor (FET), we demonstrate that the… read more here.

Keywords: oxygen plasma; plasma treatment; mos2; contact ... See more keywords
Photo by marceloleal80 from unsplash

Simple pre-treatment by low-level oxygen plasma activates screen-printed carbon electrode: Potential for mass production

Sign Up to like & get
recommendations!
Published in 2021 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2020.148760

Abstract: Abstract Screen-printed carbon electrode (SPCE) contains excessive binder which covers the graphite electrode to affect SPCE performance. Oxygen plasma treatment has the potential to remove the binder effectively to enhance electrochemical activity. However, neither the… read more here.

Keywords: oxygen plasma; treatment; spce; electrode ... See more keywords
Photo from wikipedia

Oxygen plasma modification of carbon fiber rovings for enhanced interaction toward mineral-based impregnation materials and concrete matrices

Sign Up to like & get
recommendations!
Published in 2021 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2020.121950

Abstract: Abstract The insufficient bond strength of carbon fibers (CFs) towards cementitious matrices limits at present their prospective application as CF-reinforcement in construction. In this investigation an oxygen plasma modification process was utilized to tailor the… read more here.

Keywords: carbon; fiber; oxygen plasma; mineral based ... See more keywords
Photo from wikipedia

Assessment of cold oxygen plasma technology for the inactivation of major foodborne viruses on stainless steel

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Food Engineering"

DOI: 10.1016/j.jfoodeng.2017.11.041

Abstract: Abstract This study investigated the efficacy of cold oxygen plasma (COP) for inactivation of murine norovirus-1 (MNV-1; a human norovirus [NoV] surrogate) and hepatitis A virus (HAV) on stainless steel surfaces. Decrease in the MNV-1… read more here.

Keywords: oxygen plasma; stainless steel; inactivation; cold oxygen ... See more keywords
Photo from wikipedia

Impact of unintentional oxygen doping on organic photodetectors

Sign Up to like & get
recommendations!
Published in 2018 at "Organic Electronics"

DOI: 10.1016/j.orgel.2017.12.008

Abstract: Abstract Oxygen plasma is a widely used treatment to change the surface properties of organic layers. This treatment is particularly interesting to enable the deposition from solution of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) on top of the active… read more here.

Keywords: oxygen; organic photodetectors; oxygen plasma; impact unintentional ... See more keywords
Photo from wikipedia

High-temperature direct bonding of langasite using oxygen plasma activation

Sign Up to like & get
recommendations!
Published in 2021 at "Scripta Materialia"

DOI: 10.1016/j.scriptamat.2020.113681

Abstract: Abstract A plasma-activated direct bonding method of langasite at 1000 °C under the pressure of 6 MPa has been achieved. The optimized plasma parameter analyzed by the infrared spectroscopy is oxygen 200 W for 45 s. According to… read more here.

Keywords: oxygen plasma; plasma activation; plasma; direct bonding ... See more keywords
Photo from wikipedia

High-Speed Microscopy of Diffusion in Pore-Spanning Lipid Membranes.

Sign Up to like & get
recommendations!
Published in 2018 at "Nano letters"

DOI: 10.1021/acs.nanolett.8b02240

Abstract: Pore-spanning membranes (PSMs) provide a highly attractive model system for investigating fundamental processes in lipid bilayers. We measure and compare lipid diffusion in the supported and suspended regions of PSMs prepared on a microfabricated porous… read more here.

Keywords: diffusion; pore spanning; microscopy; plasma treated ... See more keywords
Photo from wikipedia

Photothermoelectric Detection of Gold Oxide Nonthermal Decomposition.

Sign Up to like & get
recommendations!
Published in 2018 at "Nano letters"

DOI: 10.1021/acs.nanolett.8b03153

Abstract: A thin coating of gold oxide, metastable at room temperature, can be formed by placing gold in a strongly oxidizing environment such as an oxygen plasma. We report scanning photovoltage measurements of lithographically defined gold… read more here.

Keywords: gold oxide; oxygen plasma; gold; photovoltage ... See more keywords
Photo from wikipedia

Impact of oxygen plasma treatment on carrier transport and molecular adsorption in graphene.

Sign Up to like & get
recommendations!
Published in 2019 at "Nanoscale"

DOI: 10.1039/c9nr02251a

Abstract: Impact of plasma treatment on graphene's transport properties and interaction with gas molecules has been investigated with Raman, X-ray photoelectron spectroscopy, and Hall measurements. Experimental results indicate the formation of nanocrystalline domains and the enhanced… read more here.

Keywords: plasma; graphene; plasma treatment; oxygen plasma ... See more keywords
Photo by kellysikkema from unsplash

Low-temperature solution-processed SnO2 electron transport layer modified by oxygen plasma for planar perovskite solar cells

Sign Up to like & get
recommendations!
Published in 2022 at "RSC Advances"

DOI: 10.1039/d1ra08946c

Abstract: SnO2 has attracted significant attention as an electron transport layer (ETL) because of its wide optical bandgap, electron mobility, and transparency. However, the annealing temperature of 180 °C–200 °C, as reported by several studies, for… read more here.

Keywords: sno2; low temperature; oxygen plasma;
Photo from wikipedia

Fast and controlled fabrication of porous graphene oxide: application of AFM tapping for mechano-chemistry.

Sign Up to like & get
recommendations!
Published in 2018 at "Nanotechnology"

DOI: 10.1088/1361-6528/aaafc5

Abstract: This paper describes a novel method to fabricate porous graphene oxide (PGO) from GO by exposure to oxygen plasma. Compared to other methods to fabricate PGO described so far, e.g. the thermal and steam etching… read more here.

Keywords: graphene oxide; chemistry; porous graphene; oxygen plasma ... See more keywords